Download or read book Technological Innovation for Cloud Based Engineering Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2015-03-27 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2015, held in Costa de Caparica, Portugal, in April 2015. The 54 revised full papers were carefully reviewed and selected from 119 submissions. The papers present selected results produced in engineering doctoral programs and focus on development and application of cloud-based engineering systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks; cloud-based manufacturing; reconfigurable manufacturing; distributed computing and embedded systems; perception and signal processing; healthcare; smart monitoring systems; and renewable energy and energy-related management, decision support, simulation and power conversion.

Download or read book Technological Innovation for Smart Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2017-04-19 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2017, held in Costa de Caparica, Portugal, in May 2017. The 46 revised full papers were carefully reviewed and selected from 95 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for smart systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks, computational intelligence, systems analysis, smart manufacturing systems, smart sensorial systems, embedded and real time systems, energy: management, energy: optimization, distributed infrastructure, solar energy, electrical machines, power electronics, and electronics.

Download or read book Technological Innovation for Life Improvement written by Luis M. Camarinha-Matos and published by Springer Nature. This book was released on 2020-04-29 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2020, held in Costa de Caparica, Portugal, in July 2020. The 20 full papers and 24 short papers presented were carefully reviewed and selected from 91 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for industry and service systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks; decisions systems; analysis and synthesis algorithms; communication systems; optimization systems; digital twins and smart manufacturing; power systems; energy control; power transportation; biomedical analysis and diagnosis; and instrumentation in health.

Download or read book Handbook of Integration of Cloud Computing Cyber Physical Systems and Internet of Things written by Rajiv Ranjan and published by Springer Nature. This book was released on 2020-11-04 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers recent advances in the integration of three areas, namely, cloud computing, cyber-physical systems, and the Internet of things which is expected to have a tremendous impact on our daily lives. It contains a total of thirteen peer-reviewed and edited chapters. This book covers topics such as context-aware cyber-physical systems, sustainable cloud computing, fog computing, and cloud monitoring; both the theoretical and practical aspects belonging to these topics are discussed. All the chapters also discuss open research challenges in the areas mentioned above. Finally, the handbook presents three use cases regarding healthcare, smart buildings and disaster management to assist the audience in understanding how to develop next-generation IoT- and cloud-enabled cyber-physical systems. This timely handbook is edited for students, researchers, as well as professionals who are interested in the rapidly growing fields of cloud computing, cyber-physical systems, and the Internet of things.

Download or read book Impact of Disruptive Technologies on the Sharing Economy written by Gaol, Ford Lumban and published by IGI Global. This book was released on 2021-06-25 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because it continually implements entrepreneurial creativity and innovative business models, the economic landscape is ever-changing in today’s globalized world. As consumers become more willing to accept new strategic trends, this has led to the emergence of disruptive technologies. Since this equipment has an insufficient amount of information and high risks, it is necessary to assess the potential of disruptive technologies in the commercial environment. Impact of Disruptive Technologies on the Sharing Economy provides emerging research exploring the theoretical and practical aspects of disruptive technologies and knowledge-based entrepreneurial efforts and applications within management, business, and economics. Featuring coverage on a broad range of topics such as consumer ethics, corporate governance, and insurance issues, this book is ideally designed for IT specialists, IT consultants, software developers, computer engineers, managers, executives, managing directors, students, professors, scientists, professionals, industry practitioners, academicians, and researchers seeking current research on the consequences of disruptive technologies.

Download or read book Fostering Sustainable Development in the Age of Technologies written by Rohit Sharma and published by Emerald Group Publishing. This book was released on 2023-12-13 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fostering Sustainable Development in the Age of Technologies highlights the interplay between various disruptive technologies such as Artificial Intelligence, Autonomous robots, Big Data Analytics, Blockchain, Cloud Computing, and Digital Twins, and holistic sustainable development.

Download or read book Information Technology Systems Research and Computational Physics written by Piotr Kulczycki and published by Springer. This book was released on 2019-04-17 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights a broad range of modern information technology tools, techniques, investigations and open challenges, mainly with applications in systems research and computational physics. Divided into three major sections, it begins by presenting specialized calculation methods in the framework of data analysis and intelligent computing. In turn, the second section focuses on application aspects, mainly for systems research, while the final section investigates how various tasks in the basic disciplines—mathematics and physics—can be tackled with the aid of contemporary IT methods. The book gathers selected presentations from the 3rd Conference on Information Technology, Systems Research and Computational Physics (ITSRCP'18), which took place on 2–5 July 2018 in Krakow, Poland. The intended readership includes interdisciplinary scientists and practitioners pursuing research at the interfaces of information technology, systems research, and computational physics.

Download or read book Distributed Embedded Controller Development with Petri Nets written by Filipe de Carvalho Moutinho and published by Springer. This book was released on 2015-10-12 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a model-based development approach for globally-asynchronous locally-synchronous distributed embedded controllers. This approach uses Petri nets as modeling formalism to create platform and network independent models supporting the use of design automation tools. To support this development approach, the Petri nets class in use is extended with time-domains and asynchronous-channels. The authors’ approach uses models not only providing a better understanding of the distributed controller and improving the communication among the stakeholders, but also to be ready to support the entire lifecycle, including the simulation, the verification (using model-checking tools), the implementation (relying on automatic code generators), and the deployment of the distributed controller into specific platforms. Uses a graphical and intuitive modeling formalism supported by design automation tools; Enables verification, ensuring that the distributed controller was correctly specified; Provides flexibility in the implementation and maintenance phases to achieve desired constraints (high performance, low power consumption, reduced costs), enabling porting to different platforms using different communication nodes, without changing the underlying behavioral model.

Download or read book Technological Innovation for Cyber Physical Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2016-03-24 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2016, held in Costa de Caparica, Portugal, in April 2016. The 53 revised full papers were carefully reviewed and selected from 112 submissions. The papers present selected results produced in engineering doctoral programs and focus on research, development, and application of cyber-physical systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: enterprise collaborative networks; ontologies; Petri nets; manufacturing systems; biomedical applications; intelligent environments; control and fault tolerance; optimization and decision support; wireless technologies; energy: smart grids, renewables, management, and optimization; bio-energy; and electronics.

Download or read book Environmentally Responsible Supply Chains in an Era of Digital Transformation written by Pietro Evangelista and published by Edward Elgar Publishing. This book was released on 2024-05-02 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, available technologies can help make a supply chain resilient in volatile times whilst also keeping it responsible. Environmentally Responsible Supply Chains in an Era of Digital Transformation focuses on the linkages between digital technologies and environmental sustainability research and outlines synergies for more resilient, efficient and transparent supply chain management practices.

Download or read book Smart Food Industry The Blockchain for Sustainable Engineering written by Eduardo Jacob Lopes and published by CRC Press. This book was released on 2023-12-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Food Industry: The Blockchain for Sustainable Engineering, Volume I - Fundamentals, Technologies, and Management is a comprehensive overview of the current state of knowledge about food engineering and processing, under sustainable engineering perspective. This book includes disruptive approaches that will potentially enable the food industry for the transition to sustainable production. Divided into four parts, the book explores (i) fundamentals of sustainable food, (ii) conventional technologies in the food industry, (iii) sustainabile emerging technologies in food industries, and (iv) sustainable management in food industries. The book is an invaluable reference resource for students, researchers, graduates, and professionals, in general, who wish to gain knowledge in the engineering and food processing area as well as about sustainable food industry practices.

Download or read book Challenges for Technology Innovation An Agenda for the Future written by Fernando Moreira da Silva and published by CRC Press. This book was released on 2017-04-21 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is undergoing a profound transformation, driven by radical technological changes and an accelerated globalisation process. A new culture of greater resource efficiency and disruptive innovation will require new technologies, processes and materials, fostering new knowledge, innovation, education and a digital society, bringing forward new business opportunities and novel solutions to major societal challenges. Challenges for Technology Innovation: an Agenda for the Future is the result of the 1st International Conference on Sustainable Smart Manufacturing – S2M, held at the Faculty of Architecture in Lisbon, Portugal, on October 20-22, 2016. It contains innovative contributions in the field of Sustainable Smart Manufacturing and related topics, making a significant contribution to further development of these fields. This volume covers a wide range of topics including Design and Digital Manufacturing, Design Education, Eco Design and Innovation, Future Cities, Medicine 4.0, Smart Manufacturing, Sustainable Business Models, Sustainable Construction, Sustainable Design and Technology and Sustainable Recycling.

Download or read book Mathematical Modeling and Simulation of Systems MODS 2020 written by Serhiy Shkarlet and published by Springer Nature. This book was released on 2020-08-29 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains works on mathematical and simulation modeling of processes in various domains: ecology and geographic information systems, IT, industry, and project management. The development of complex multicomponent systems requires an increase in accuracy, efficiency, and adequacy while reducing the cost of their creation. The studies presented in the book are useful to specialists who are involved in the development of real events models: analog, management and decision-making models, production models, and software products. Scientists can get acquainted with the latest research in various decisions proposed by leading scholars and identify promising directions for solving complex scientific and practical problems. The chapters of this book contain the contributions presented on the 15th International Scientific-Practical Conference, MODS, June 29–July 01, 2020, Chernihiv, Ukraine.

Download or read book Advances in Renewable Energies and Power Quality written by Manuel Pérez-Donsión and published by Cambridge Scholars Publishing. This book was released on 2020-02-13 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings together contributions dealing with renewable energies and power quality, presented over five years of the International Conference on Renewable Energy and Power Quality (ICREPQ). It contains a selection of the best papers and original contributions presenting state-of-the-art research in the field of renewable energy sources. Including some of the leading authorities in their areas of expertise, the contributors to the volume are drawn from across the globe, with about 300 authors from 60 different countries.

Download or read book Computer Supported Collaborative Decision Making written by Florin Gheorghe Filip and published by Springer. This book was released on 2016-10-27 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book about how management and control decisions are made by persons who collaborate and possibly use the support of an information system. The decision is the result of human conscious activities aiming at choosing a course of action for attaining a certain objective (or a set of objectives). The act of collaboration implies that several entities who work together and share responsibilities to jointly plan, implement and evaluate a program of activities to achieve the common goals. The book is intended to present a balanced view of the domain to include both well-established concepts and a selection of new results in the domains of methods and key technologies. It is meant to answer several questions, such as: a) “How are evolving the business models towards the ever more collaborative schemes?”; b) “What is the role of the decision-maker in the new context?” c) “What are the basic attributes and trends in the domain of decision-supporting information systems?”; d) “Which are the basic methods to aggregate the individual preferences?” e)“What is the impact of modern information and communication technologies on the design and usage of decision support systems for groups of people?”.

Download or read book Digital Marketing and Social Media Strategies for Tourism and Hospitality Organizations written by Ahmet Bulent Ozturk and published by Goodfellow Publishers Ltd. This book was released on 2022-03-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital marketing and online social media platforms have become the cornerstones to the success of places and accommodation. This edited volume investigates the current status of digital marketing and social media utilization by both travellers and service providers and explores future digital marketing and social media research trends.

Download or read book Research Anthology on Supporting Healthy Aging in a Digital Society written by Management Association, Information Resources and published by IGI Global. This book was released on 2022-02-04 with total page 1875 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s rapidly evolving society, there has been an increase in technologies and systems available to support the elderly throughout various aspects of life. We have come a long way in the quality of life we can offer our aging populations in recent years due to these technological innovations, medical advancements, and research initiatives. However, further study of these developments is crucial to ensure they are utilized to their utmost potential in securing a healthier elderly population. The Research Anthology on Supporting Healthy Aging in a Digital Society discusses the current challenges of aging in the modern world as well as recent developments in medicine and technology that can be used to improve the quality of life of elderly citizens. Covering a wide range of topics such as smart homes, remote healthcare, and aging in place, this reference work is ideal for healthcare professionals, gerontologists, therapists, government officials, policymakers, researchers, academicians, practitioners, scholars, instructors, and students.