Download or read book Techniques for Monitoring Structural Behaviour of Pipeline Systems written by Christopher Reed and published by American Water Works Association. This book was released on 2004 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project did a thorough review of the potential techniques which could monitor the structural performance of operationally critical mains (those 30" or 760mm in diameter and larger) of potable water distribution systems. The objective was to increase effective pipeline management as it relates to predictive failure. Parameters studied were global, local and environmental monitoring and the technologies studies were continuous, remote and in-pipe sensing. Gathering data from range of different sensors(aircraft, satellites, within and on pipes) proved the most optimal, with the understanding that further study of newer methods is recommended.

Download or read book Sensor Technologies for Civil Infrastructures written by Jerome P. Lynch and published by Woodhead Publishing. This book was released on 2022-07-19 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor Technologies for Civil Infrastructure, Volume 2: Applications in Structural Health Monitoring, Second Edition, provides an overview of sensor applications and a new section on future and emerging technologies. Part one is made up of case studies in assessing and monitoring specific structures such as bridges, towers, buildings, dams, tunnels, pipelines, and roads. The new edition also includes sensing solutions for assessing and monitoring of naval systems. Part two reviews emerging technologies for sensing and data analysis including diagnostic solutions for assessing and monitoring sensors, unmanned aerial systems, and UAV application in post-hazard event reconnaissance and site assessment. Includes case studies in assessing structures such as bridges, buildings, super-tall towers, dams, tunnels, wind turbines, railroad tracks, nuclear power plants, offshore structures, naval systems, levees, and pipelines Reviews future and emerging technologies and techniques including unmanned aerial systems, LIDAR, and ultrasonic and infrared sensing Describes latest emerging techniques in data analysis such as diagnostic solutions for assessing and monitoring sensors and big data analysis

Download or read book Pipeline Rules of Thumb Handbook written by M.J. Kaiser and published by Gulf Professional Publishing. This book was released on 2022-09-02 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline Rules of Thumb Handbook: A Manual of Quick, Accurate Solutions to Everyday Pipeline Engineering Problems, Ninth Edition, the latest release in the series, serves as the "go-to" source for all pipeline engineering answers. Updated with new data, graphs and chapters devoted to economics and the environment, this new edition delivers on new topics, including emissions, decommissioning, cost curves, and more while still maintaining the quick answer standard display of content and data that engineers have utilized throughout their careers. Glossaries are added per chapter for better learning tactics, along with additional storage tank and LNG fundamentals. This book continues to be the high-quality, classic reference to help pipeline engineers solve their day-to-day problems. Contains new chapters that highlight costs, safety and environmental topics, including discussions on emissions Helps readers learn terminology, with updated glossaries in every chapter Includes renovated graphs and data tables throughout

Download or read book Subsea Optics and Imaging written by John Watson and published by Elsevier. This book was released on 2013-10-31 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of optical methodology, instrumentation and photonics devices for imaging, vision and optical sensing is of increasing importance in understanding our marine environment. Subsea optics can make an important contribution to the protection and sustainable management of ocean resources and contribute to monitoring the response of marine systems to climate change. This important book provides an authoritative review of key principles, technologies and their applications. The book is divided into three parts. The first part provides a general introduction to the key concepts in subsea optics and imaging, imaging technologies and the development of ocean optics and colour analysis. Part two reviews the use of subsea optics in environmental analysis. An introduction to the concepts of underwater light fields is followed by an overview of coloured dissolved organic matter (CDOM) and an assessment of nutrients in the water column. This section concludes with discussions of the properties of subsea bioluminescence, harmful algal blooms and their impact and finally an outline of optical techniques for studying suspended sediments, turbulence and mixing in the marine environment. Part three reviews subsea optical systems technologies. A general overview of imaging and visualisation using conventional photography and video leads onto advanced techniques like digital holography, laser line-scanning and range-gated imaging as well as their use in controlled observation platforms or global observation networks. This section also outlines techniques like Raman spectroscopy, hyperspectral sensing and imaging, laser Doppler anemometry (LDA) and particle image velocimetry (PIV), optical fibre sensing and LIDAR systems. Finally, a chapter on fluorescence methodologies brings the volume to a close. With its distinguished editor and international team of contributors, Subsea optics and imaging is a standard reference for those researching, developing and using subsea optical technologies as well as environmental scientists and agencies concerned with monitoring the marine environment. Provides an authoritative review of key principles, technologies and their applications Outlines the key concepts in subsea optics and imaging, imaging technologies and the development of ocean optics and colour analysis Reviews the properties of subsea bioluminescence, harmful algal blooms and their impact

Download or read book Design and Modeling of Mechanical Systems II written by Mnaouar Chouchane and published by Springer. This book was released on 2015-03-24 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 6th International Congress on Design and Modeling of Mechanical Systems (CMSM’2015), held in Hammamet, Tunisia, from the 23rd to the 25th of March 2015. It reports on both recent research findings and innovative industrial applications in the fields of mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, and design and manufacturing of mechanical systems. Since its first edition in 2005, the CMSM Congress has been held every two years with the aim of bringing together specialists from universities and industry to present the state-of-the-art in research and applications, discuss the most recent findings and exchange and develop expertise in the field of design and modeling of mechanical systems. The CMSM Congress is jointly organized by three Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir; the Mechanical Laboratory of Sousse, part of the National Engineering School of Sousse; and the Mechanical, Modeling and Manufacturing Laboratory at the National Engineering School of Sfax.

Download or read book Essentials of Flow Assurance Solids in Oil and Gas Operations written by Abdullah Hussein and published by Gulf Professional Publishing. This book was released on 2022-10-19 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow assurance solids deposition is one of the main challenges in oil and gas production operations with millions of dollars spent annually on their mitigation. Essentials of Flow Assurance Solids in Oil and Gas Operations works as an all-inclusive reference for engineers and researchers, covering all the different types of solids that are commonly encountered in oil and gas fields. Structured to flow through real-world operations, the reference branches through each solid deposit problem where the root causes are as well as modeling, monitoring, characterization, and management strategies, all comprehensively reviewed in the light of contemporary research breakthroughs. Backed by several field case studies, Essentials of Flow Assurance Solids in Oil and Gas Operations gives petroleum and reservoir engineers a resource to correlate between the theoretical fundamentals and field practical applications allowing for sustainable and optimal operations. Provides the main operations of oil and gas fields, the characteristics of produced fluids, and the main flow assurance challenges Furnishes the basic principles of deposits formation and mitigation, starting with a full investigation of the problems, then mechanisms, causes, predictions, modelling, and sample analysis, followed by management Distinctively discusses the operational and environmental implications of flow assurance solids and their management using chemical and nonchemical methods Teaches engineers through impactful visuals and data sets included in every chapter

Download or read book Fibre Optic Methods for Structural Health Monitoring written by Branko Glisic and published by John Wiley & Sons. This book was released on 2007-12-10 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fibre optic sensors in structural health monitoring has rapidly accelerated in recent years. By embedding fibre optic sensors in structures (e.g. buildings, bridges and pipelines) it is possible to obtain real time data on structural changes such as stress or strain. Engineers use monitoring data to detect deviations from a structure’s original design performance in order to optimise the operation, repair and maintenance of a structure over time. Fibre Optic Methods for Structural Health Monitoring is organised as a step-by-step guide to implementing a monitoring system and includes examples of common structures and their most-frequently monitored parameters. This book: presents a universal method for static structural health monitoring, using a technique with proven effectiveness in hundreds of applications worldwide; discusses a variety of different structures including buildings, bridges, dams, tunnels and pipelines; features case studies which describe common problems and offer solutions to those problems; provides advice on establishing mechanical parameters to monitor (including deformations, rotations and displacements) and on placing sensors to achieve monitoring objectives; identifies methods for interpreting data according to construction material and shows how to apply numerical concepts and formulae to data in order to inform decision making. Fibre Optic Methods for Structural Health Monitoring is an invaluable reference for practising engineers in the fields of civil, structural and geotechnical engineering. It will also be of interest to academics and undergraduate/graduate students studying civil and structural engineering.

Download or read book Pipeline Structural Health Monitoring Using Macro fiber Composite Active Sensors written by Andrew B. Thien and published by . This book was released on 2006 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States economy is heavily dependent upon a vast network of pipeline systems to transport and distribute the nation's energy resources. As this network of pipelines continues to age, monitoring and maintaining its structural integrity remains essential to the nation's energy interests. Numerous pipeline accidents over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents show that the current monitoring methods are not sufficient and leave a considerable margin for improvement. To avoid such catastrophes, more thorough methods are needed. As a solution, the research of this thesis proposes a structural health monitoring (SHM) system for pipeline networks. By implementing a SHM system with pipelines, their structural integrity can be continuously monitored, reducing the overall risks and costs associated with current methods. The proposed SHM system relies upon the deployment of macro fiber composite (MFC) patches for the sensor array. Because MFC patches are flexible and resilient, they can be permanently mounted to the curved surface of a pipeline's main body. From this location, the MFC patches are used to monitor the structural integrity of the entire pipeline. Two damage detection techniques, guided wave and impedance methods, were implemented as part of the proposed SHM system. However, both techniques utilize the same MFC patches. This dual use of the MFC patches enables the proposed SHM system to require only a single sensor array. The presented Lamb wave methods demonstrated the ability to correctly identify and locate the presence of damage in the main body of the pipeline system, including simulated cracks and actual corrosion damage. The presented impedance methods demonstrated the ability to correctly identify and locate the presence of damage in the flanged joints of the pipeline system, including the loosening of bolts on the flanges. In addition to damage to the actual pipeline itself, the proposed methods were used to demonstrate the capability of detecting deposits inside of pipelines. Monitoring these deposits can prevent clogging and other hazardous situations. Finally, suggestions are made regarding future research issues which are needed to advance this research. Because the research of this thesis has only demonstrated the feasibility of the techniques for such a SHM system, these issues require attention before any commercial applications can be realized.

Download or read book Modeling and Monitoring of Pipelines and Networks written by Cristina Verde and published by Springer. This book was released on 2017-05-21 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the analysis and design of advanced techniques for on-line automatic computational monitoring of pipelines and pipe networks. It discusses how to improve the systems’ security considering mathematical models of the flow, historical flow rate and pressure data, with the main goal of reducing the number of sensors installed along a pipeline. The techniques presented in the book have been implemented in digital systems to enhance the abilities of the pipeline network’s operators in recognizing anomalies. A real leak scenario in a Mexican water pipeline is used to illustrate the benefits of these techniques in locating the position of a leak. Intended for an interdisciplinary audience, the book addresses researchers and professionals in the areas of mechanical, civil and control engineering. It covers topics on fluid mechanics, instrumentation, automatic control, signal processing, computing, construction and diagnostic technologies.

Download or read book Frontiers in Geotechnical Engineering written by Madhavi Latha G. and published by Springer. This book was released on 2019-02-11 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains contributions by eminent researchers in the field of geotechnical engineering. The chapters of this book are based on the keynote and theme lectures delivered at the Indian Geotechnical Conference 2018, and discuss the recent issues and challenges, while providing perspective on the possible solutions and future directions. A strong emphasis is placed on proving connections between academic research and field practice, with many examples and case studies. Topics covered in this volume include contemporary infrastructural challenges, underground space utilization, sustainable construction, dealing with problematic soils and situations and geo-environmental issues including landfills. This book will be of interest to researchers, practitioners and students alike.

Download or read book Pipeline Structural Health Monitoring Using Macro fiber Composite Active Sensors written by and published by . This book was released on 2006 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States economy is heavily dependent upon a vast network of pipeline systems to transport and distribute the nation's energy resources. As this network of pipelines continues to age, monitoring and maintaining its structural integrity remains essential to the nation's energy interests. Numerous pipeline accidents over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents show that the current monitoring methods are not sufficient and leave a considerable margin for improvement. To avoid such catastrophes, more thorough methods are needed. As a solution, the research of this thesis proposes a structural health monitoring (SHM) system for pipeline networks. By implementing a SHM system with pipelines, their structural integrity can be continuously monitored, reducing the overall risks and costs associated with current methods. The proposed SHM system relies upon the deployment of macro-fiber composite (MFC) patches for the sensor array. Because MFC patches are flexible and resilient, they can be permanently mounted to the curved surface of a pipeline's main body. From this location, the MFC patches are used to monitor the structural integrity of the entire pipeline. Two damage detection techniques, guided wave and impedance methods, were implemented as part of the proposed SHM system. However, both techniques utilize the same MFC patches. This dual use of the MFC patches enables the proposed SHM system to require only a single sensor array. The presented Lamb wave methods demonstrated the ability to correctly identify and locate the presence of damage in the main body of the pipeline system, including simulated cracks and actual corrosion damage. The presented impedance methods demonstrated the ability to correctly identify and locate the presence of damage in the flanged joints of the pipeline system, including the loosening of bolts on the flanges. In addition to damage to the actual pipeline itself, the proposed methods were used to demonstrate the capability of detecting deposits inside of pipelines. Monitoring these deposits can prevent clogging and other hazardous situations. Finally, suggestions are made regarding future research issues which are needed to advance this research. Because the research of this thesis has only demonstrated the feasibility of the techniques for such a SHM system, these issues require attention before any commercial applications can be realized.

Download or read book Design Assessment Monitoring and Maintenance of Bridges and Infrastructure Networks written by Fabio Biondini and published by Routledge. This book was released on 2020-08-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Relevant advances have been accomplished by the scientific community and engineering profession in the design, assessment, monitoring, maintenance, and management of sustainable and resilient bridge structures and infrastructures. These advances have been presented and discussed at The Sixth International Conference on Bridge Maintenance, Safety And Management (IABMAS 2012), held in Stresa, Italy, from 8 to 11 July 2012 (http://www.iabmas2012.org). IABMAS 2012 has been organised on behalf of the International Association for Bridge Maintenance And Safety (IABMAS) under the auspices of Politecnico di Milano. This book collects the extended versions of selected papers presented at IABMAS 2012 and invited papers originally published in a Special Issue of Structure and Infrastructure Engineering. These papers provide significant contributions to the process of making more rational decisions in bridge design, assessment, monitoring and maintenance. The editors would like to thank the authors for their contributions and hope that this collection of papers will represent a valuable reference for scientific research and engineering applications in the fields of design, assessment, monitoring, and maintenance of bridges and infrastructure networks.

Download or read book Pipeline Structural Health Monitoring Using Macro fiber Composite Active Sensors written by and published by . This book was released on 2006 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States economy is heavily dependent upon a vast network of pipeline systems to transport and distribute the nation's energy resources. As this network of pipelines continues to age, monitoring and maintaining its structural integrity remains essential to the nation's energy interests. Numerous pipeline accidents over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents show that the current monitoring methods are not sufficient and leave a considerable margin for improvement. To avoid such catastrophes, more thorough methods are needed. As a solution, the research of this thesis proposes a structural health monitoring (SHM) system for pipeline networks. By implementing a SHM system with pipelines, their structural integrity can be continuously monitored, reducing the overall risks and costs associated with current methods. The proposed SHM system relies upon the deployment of macro fiber composite (MFC) patches for the sensor array. Because MFC patches are flexible and resilient, they can be permanently mounted to the curved surface of a pipeline's main body. From this location, the MFC patches are used to monitor the structural integrity of the entire pipeline. Two damage detection techniques, guided wave and impedance methods, were implemented as part of the proposed SHM system. However, both techniques utilize the same MFC patches. This dual use of the MFC patches enables the proposed SHM system to require only a single sensor array. The presented Lamb wave methods demonstrated the ability to correctly identify and locate the presence of damage in the main body of the pipeline system, including simulated cracks and actual corrosion damage. The presented impedance methods demonstrated the ability to correctly identify and locate the presence of damage in the flanged joints of the pipeline system, including the loosening of bolts on the flanges. In addition to damage to the actual pipeline itself, the proposed methods were used to demonstrate the capability of detecting deposits inside of pipelines. Monitoring these deposits can prevent clogging and other hazardous situations. Finally, suggestions are made regarding future research issues which are needed to advance this research. Because the research of this thesis has only demonstrated the feasibility of the techniques for such a SHM system, these issues require attention before any commercial applications can be realized.

Download or read book Arctic Undersea Inspection of Pipelines and Structures written by and published by . This book was released on 1983 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Perspectives in Dynamical Systems II Numerical and Analytical Approaches written by Jan Awrejcewicz and published by Springer Nature. This book was released on with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering written by and published by . This book was released on 1995 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pipeline Inspection and Health Monitoring Technology written by Hongfang Lu and published by Springer Nature. This book was released on 2023-01-03 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes six chapters aiming to introduce global pipeline inspection and health monitoring technologies comprehensively. The pipeline is the blood vessel of the energy system and a vital lifeline project. After many years of service, the pipeline gradually enters the aging stage. Pipeline inspection and health monitoring can effectively reduce the failure and accident risks of the pipeline, and it is conducive to integrity management. Through case analysis, practitioners can have a deeper understanding of the application of related technologies.