Download or read book CLT Handbook written by Erol Karacabeyli and published by . This book was released on 2013-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tall Wood Buildings written by Michael Green and published by Birkhauser. This book was released on 2017-01-11 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tall Wood buildings' have been at the foreground of innovative building practice for a number of years. From London to Stockholm, from Vancouver to Melbourne timber buildings of up to 20 storeys have been built or designed. This publication explains the typical construction types and documents an international selection of 13 case studies with many specially prepared construction drawings, demonstrating the range of the technology.
Download or read book The Case for Tall Wood Buildings written by Michael Green and published by Blurb. This book was released on 2017-02-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a new structural system in wood that represents the first significant challenge to concrete and steel structures since their inception in tall building design more than a century ago. The introduction of these ideas is driven by the need to find safe, carbon-neutral and sustainable alternatives to the incumbent structural materials of the urban world. The potential market for these ideas is quite simply enormous. The proposed solutions have the potential to revolutionize the building industry, address the major challenges of climate change, urbanization, and sustainable development and to significantly contribute to world housing needs.
Download or read book Solid Wood written by Joseph Mayo and published by Routledge. This book was released on 2015-10-05 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 10-15 years a renaissance in wood architecture has occurred with the development of new wood building systems and design strategies, elevating wood from a predominantly single-family residential idiom to a rival of concrete and steel construction for a variety of building types, including high rises. This new solid wood architecture offers unparalleled environmental as well as construction and aesthetic benefits, and is of growing importance for professionals and academics involved in green design. Solid Wood provides the first detailed book which allows readers to understand new mass timber/massive wood architecture. It provides: historical context in wood architecture from around the world a strong environmental rationale for the use of wood in buildings recent developments in contemporary fire safety and structural issues insights into building code challenges detailed case studies of new large-scale wood building systems on a country-by-country basis. Case studies from the UK, Norway, Sweden, Germany, Austria, Italy, Canada, the United States, New Zealand and Australia highlight design strategies, construction details and unique cultural attitudes in wood design. The case studies include the most ambitious academic, hospitality, industrial, multi-family, and wood office buildings in the world. With discussions from leading architectural, engineering, and material manufacturing firms in Europe, North America and the South Pacific, Solid Wood disrupts preconceived notions and serves as an indispensable guide to twenty-first century wood architecture and its environmental and cultural benefits.
Download or read book Fire Safe Use of Wood in Buildings written by Andrew Buchanan and published by CRC Press. This book was released on 2022-07-13 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on the design of timber buildings for fire safety, developed within the global network Fire Safe Use of Wood (FSUW) and with reference to Eurocode 5 and other international codes. It introduces the behaviour of fires in timber buildings and describes strategies for providing safety if unwanted fires occur. It provides guidance on building design to prevent any fires from spreading while maintaining the load-bearing capacity of structural timber elements, connections and compartmentation. Also included is information on the reaction-to-fire of wood products according to different classification systems, as well as active measures of fire protection, and quality of workmanship and inspection as means of fulfilling fire safety objectives. Presents global guidance on fire safety in timber buildings Provides a wide perspective, covering the whole field of fire safety design Uses the latest scientific knowledge, based on recent analytical and experimental research results Gives practical examples illustrating the importance of good detailing in building design Fire Safe Use of Wood in Buildings is ideal for all involved in the fire safety of buildings, including architects, engineers, firefighters, educators, regulatory authorities, insurance companies and professionals in the building industry.
Download or read book Smart Buildings written by Marco Casini and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Buildings: Advanced Materials and Nanotechnology to Improve Energy Efficiency and Environmental Performance presents a thorough analysis of the latest advancements in construction materials and building design that are applied to maximize building efficiency in both new and existing buildings. After a brief introduction on the issues concerning the design process in the third millennium, Part One examines the differences between Zero Energy, Green, and Smart Buildings, with particular emphasis placed on the issue of smart buildings and smart housing, mainly the 'envelope' and how to make it more adaptive with the new possibilities offered by nanotechnology and smart materials. Part Two focuses on the last generation of solutions for smart thermal insulation. Based on the results of extensive research into more innovative insulation materials, chapters discuss achievements in nanotechnology, bio-ecological, and phase-change materials. The technical characteristics, performance level, and methods of use for each are described in detail, as are the achievements in the field of green walls and their use as a solution for upgrading the energy efficiency and environmental performance of existing buildings. Finally, Part Three reviews current research on smart windows, with the assumption that transparent surfaces represent the most critical element in the energy balance of the building. Chapters provide an extensive review on the technical features of transparent closures that are currently on the market or under development, from so-called dynamic glazing to bio-adaptive and photovoltaic glazing. The aesthetic potential and performance limits are also be discussed. - Presents valuable definitions that are given to explain the characteristics, requirements, and differences between 'zero energy', 'green' and 'smart' buildings - Contains particular focus on the next generation of construction materials and the most advanced products currently entering the market - Lists both the advantages and disadvantages to help the reader choose the most suitable solution - Takes into consideration both design and materials aspects - Promotes the existence of new advanced materials providing technical information to encourage further use and reduce costs compared to more traditional materials
Download or read book Energy Based Seismic Engineering written by Amadeo Benavent-Climent and published by Springer Nature. This book was released on 2021-04-30 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of seismic engineering, as presented by leading researchers and engineers at the 1st International Workshop on Energy-Based Seismic Engineering (IWEBSE), held in Madrid, Spain, on May 24-26, 2021. The contributions cover a diverse range of topics, including energy-based EDPs, damage potential of ground motion, structural modeling in energy-based damage assessment of structures, energy dissipation demand on structural components, innovative structures with energy dissipation systems or seismic isolation, as well as seismic design and analysis. Selected by means of a rigorous peer-review process, they will spur novel research directions and foster future multidisciplinary collaborations.
Download or read book Cross Laminated Timber Design Structural Properties Standards and Safety written by Mustafa Mahamid and published by McGraw Hill Professional. This book was released on 2020-03-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Master the practice of designing structures with cross-laminated timber This comprehensive guide explains the design standards, safety protocols, and codes and regulations engineers need to know to use cross-laminated timber as a structural building material. Featuring contributions from experts in the field, Cross-Laminated Timber Design: Structural Properties, Standards, and Safety introduces the material properties of CLT and goes on to cover the recommended lateral and vertical design techniques. You will get clear explanations of all relevant NDS, ASCE 7, and IBC provisions along with real-world examples and case studies. Sustainability and environmental issues are discussed in full detail. Coverage includes: • An introduction to cross-laminated timber • Product standards for cross-laminated timber • Structural design—gravity • Structural design—lateral • Structural connections • Building envelope design with cross-laminated timber • Acoustics for CLT projects • Fire for CLT projects • Environmental aspects of CLT as a construction material • Sustainability of cross-laminated timber
Download or read book Fire Science and Technology 2015 written by Kazunori Harada and published by Springer. This book was released on 2016-10-04 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on topics in the entire spectrum of fire safety science, targeting research in fires, explosions, combustion science, heat transfer, fluid dynamics, risk analysis, structural engineering, and other subjects. The book contributes to a gain in advanced scientific knowledge and presents or advances new ideas in all topics in fire safety science. Two decades ago, the 1st Asia-Oceania Symposium on Fire Science and Technology was held in Hefei, China. Since then, the Asia-Oceania Symposia have grown in size and quality. This book, reflecting that growth, helps readers to understand fire safety technology, design, and methodology in diverse areas including historical buildings, photovoltaic panels, batteries, and electric vehicles.
Download or read book Applications of Fire Engineering written by Martin Gillie and published by CRC Press. This book was released on 2017-09-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book holds the proceedings of the Conference on Applications of Structural Fire Engineering (ASFE 2017), held on September 7-8, 2017, in Manchester, UK. The ASFE’17 conference will be the next in a series (2009, 2011, 2013, 2015) of successful conferences that aim to bring together experts and specialists in design against fire from all over the world to share ideas and to acquire knowledge in the field of structural fire engineering. Practice in structural engineering increasingly accepts the benefits of performancebased approaches to the design of structures for fire resistance. This conference will focus on the application of design methods, both manual and computational, for structures to resist fire. Particularly relevant themes will be fire modelling, simulation of the heat transfer between fire and structures, and modelling of structural behaviour at elevated temperatures using numerical methods or software implementations of design codes.
Download or read book CLT Handbook written by Sylvain Gagnon and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual of Multi storey Timber Construction written by Hermann Kaufmann and published by Detail. This book was released on 2018 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Wood is suitable for use in multi-storey building construction with barely any restrictions. This is new and requires creative rethinking of tried and tested practices in wood construction: classical categories can be replaced by mixed construction methods as necessary within a project, which yields completely new possibilities in designing wood structures. The Manual provides architects, engineers and wood specialists with the essential expertise on the new systematic and construction methodology, from the design to prefabrication to the implementation on site. It lays the grounds for mutual understanding among everyone involved in the project, to facilitate the necessary cooperation in the integral planning and construction process." --Publisher.
Download or read book Solid Wood written by Joseph Mayo and published by Routledge. This book was released on 2015-10-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 10-15 years a renaissance in wood architecture has occurred with the development of new wood building systems and design strategies, elevating wood from a predominantly single-family residential idiom to a rival of concrete and steel construction for a variety of building types, including high rises. This new solid wood architecture offers unparalleled environmental as well as construction and aesthetic benefits, and is of growing importance for professionals and academics involved in green design. Solid Wood provides the first detailed book which allows readers to understand new mass timber/massive wood architecture. It provides: historical context in wood architecture from around the world a strong environmental rationale for the use of wood in buildings recent developments in contemporary fire safety and structural issues insights into building code challenges detailed case studies of new large-scale wood building systems on a country-by-country basis. Case studies from the UK, Norway, Sweden, Germany, Austria, Italy, Canada, the United States, New Zealand and Australia highlight design strategies, construction details and unique cultural attitudes in wood design. The case studies include the most ambitious academic, hospitality, industrial, multi-family, and wood office buildings in the world. With discussions from leading architectural, engineering, and material manufacturing firms in Europe, North America and the South Pacific, Solid Wood disrupts preconceived notions and serves as an indispensable guide to twenty-first century wood architecture and its environmental and cultural benefits.
Download or read book Guide to Natural Ventilation in High Rise Office Buildings written by Antony Wood and published by Routledge. This book was released on 2013 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide sets out recommendations for every phase of the planning, construction and operation of natural ventilation systems in these buildings, including local climatic factors that need to be taken into account, how to plan for seasonal variations in weather, and the risks in adopting different implementation strategies. All of the recommendations are based on analysis of the research findings from richly-illustrated international case studies. This is the first technical guide from the Council on Tall Buildings and Urban Habitat's Tall Buildings & Sustainability Working Group looking in depth at a key element in the creation of tall buildings with a much-reduced environmental impact, while taking the industry closer to an appreciation of what constitutes a sustainable tall building, and what factors affect the sustainability threshold for tall.
Download or read book Canadian Wood frame House Construction written by John Burrows and published by Central Mortgage and Housing Corporation. This book was released on 2005 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy reference book walks you through the complete construction of a wood frame house, from excavation to the finishing touches. It is updated to the current edition of the National Building code. This is the most comprehensive, easy-to-use reference book for the construction of wood-frame houses. Canadian Wood-Frame House Construction features illustrations tables, plan ahead notes, healthy housing insights to minimize and protect occupants and environment.
Download or read book Design of Wood Structures ASD written by Donald E. Breyer and published by McGraw Hill Professional. This book was released on 2003-09-16 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: * The best-selling text and reference on wood structure design * Incorporates the latest National Design Specifications, the 2003 International Building Code and the latest information on wind and seismic loads
Download or read book Structural Design of Buildings written by Feng Fu and published by Emerald Group Publishing. This book was released on 2024-07-25 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design of Buildings: Holistic Design is the essential reference for structural engineers involved in the design of buildings and other structures. It forms part of the Structural Design of Buildings series and introduces the concepts and principles involved in holistic structural design of a building.
