Download or read book TB T 3094 2015 Translated English of Chinese Standard TBT 3094 2015 TB T3094 2015 TBT3094 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-02-11 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, working conditions, main characteristics, technical requirements, test, inspection results, marking, packaging, transportation and storage of vestibule diaphragm of locomotive and rolling stock.

Download or read book GB T 3094 2012 Translated English of Chinese Standard GBT 3094 2012 GB T3094 2012 GBT3094 2012 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-01-10 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, designation, ordering information, shape, dimension, technical requirements, test method, inspection rule, packaging, marking and quality certificate of cold drawn shaped steel tubes.

Download or read book TB T 3396 1 2015 Translated English of Chinese Standard TB T 3396 1 2015 TBT3396 1 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-09-26 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part specifies the indoor test method for the longitudinal resistance of rails assembled with fasteners. This Part applies to fastening systems for high-speed railways. 2 Sign The following signs are applicable to this Document. D1: The maximum longitudinal displacement of the rail during the loading cycle, in millimeters (mm). D2: The residual longitudinal displacement of the rail after unloading, in millimeters (mm). D3: Elastic longitudinal displacement of the rail before sliding, in millimeters (mm). F: The longitudinal resistance of the rail, in kilonewtons (kN). 3 Principle Assemble the short rail with fasteners on the rail bearing surface of the anchored sleeper; and apply longitudinal tension to the rail; record the load and the longitudinal displacement of the rail relative to the sleeper; and unload when the rail slips. The longitudinal resistance of the rail is obtained from the load-displacement curve. 4 Test Equipment 4.1 Rails A section of short rail with a length of about 0.5 m, whose section is the same as that used for the assembly of the fastener to be tested or the assembly fatigue performance test. The rails shall be free from peeling, free from floating rust on the surface; and the bottom of the rails TB/T 3396.1-2015 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery. Page 5 of 9 shall not be polished due to repeated tests. 4.2 Loading device The device with the loading rate of 9kN/min ~ 11kN/min, and the static loading can reach 50kN, which applies the tension in the direction of the vertical sleeper through the bottom of the rail. 4.3 Displacement sensor An instrument for measuring the longitudinal displacement of the rail relative to the sleeper, with an indication error of 0.01 mm. 4.4 Load sensor An instrument for measuring the load applied to the rail, with an accuracy class of 0.5 4.5 Recording equipment For equipment capable of digitally recording and drawing load-displacement curves during the test, the sampling frequency shal...

Download or read book GB T 19120 2015 Translated English of Chinese Standard GBT 19120 2015 GB T19120 2015 GBT19120 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-10-16 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the structural requirements, performance requirements and test methods of the braking system of tri-wheel vehicles and low-speed goods vehicles. This Standard is applicable to the braking system of tri-wheel vehicles and low-speed goods vehicles.

Download or read book GB T 12224 2015 Translated English of Chinese Standard GBT 12224 2015 GB T12224 2015 GBT12224 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-11-09 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the pressure-temperature rated values, materials, design requirements, inspection and test, markings of steel valves, and requirements for special pressure level valves and defined pressure level valves. This Standard applies to flanged, threaded and welded valves, as well as clipon valves and valves for single flange installation, of which the pressurebearing members are made using the materials given in Table 1A and Table 1B; the valve body is made by casting, forged rolling, rolling and assemblingwelding. This Standard includes valves of which the nominal pressure is Class series and PN series.

Download or read book TB T 3396 3 2015 Translated English of Chinese Standard TB T 3396 3 2015 TBT3396 3 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-11-09 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part specifies the indoor test method for the static stiffness of fastening assemblies. This Part applies to high-speed railway fastener systems. 2 Symbols The following symbols apply to this document. F1: The minimum load applied to the tested fastener system, in kilonewtons (kN); F2: The maximum load applied to the tested fastener system, in kilonewtons (kN); D1: The displacement of the rail when loaded to F1, in millimeters (mm); D2: The displacement of the rail when loaded to F2, in millimeters (mm); KSTA: Assembly static stiffness, in kilonewtons per millimeter (kN/mm). 3 Principles Apply a load, which is perpendicular to the bottom surface of the rail, to the rail (assembled on a single bearing surface) with the fastener system assembled by the testing machine, to determine the displacement of the rail, as relative to the sleeper, under the load. 4 Test equipment 4.1 Steel rail A segment of short steel rail, which has a length of about 0.5 m, the section of which is the same as the section of the steel rail used for the tested fastening assembly or assembly fatigue performance test. The steel rail shall be free of peeling and rust on the surface. TB/T 3396.3-2015 www.ChineseStandard.net  Buy True-PDF  Auto-delivery. Page 5 of 6 4.2 Loading device A device, which has a loading rate of 2 kN/s ~ 6 kN/s, a static loading reaching up to 110 kN, is used to apply vertical load to the rail surface. 4.3 Displacement sensor The instrument for measuring the vertical displacement of the rail, as relative to the sleeper, which has an indication error of 0.01 mm. 4.4 Load sensor An instrument for measuring the load, which is applied to the rail; it has an accuracy grade of 0.5. 4.5 Recording device A device, that can perform digital recording and draw a load-displacement curve, during the test. It has a sampling frequency of not less than 50 Hz. 5 Test pieces 5.1 Sleeper Sleepers, 1/2 sleepers or slab track units with embedded fasteners or reserved bolt holes (all d...

Download or read book GB T 12769 2015 Translated English of Chinese Standard GBT 12769 2015 GB T12769 2015 GBT12769 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-02-16 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and contract (or purchase order) of titanium-clad copper bar. This standard is applicable to titanium-clad copper bar (hereinafter referred to as composite bar) used in the manufacture of metal anode electrolyzer and other applications produced by hot-extrusion, hot-extrusion stretching, explosive composite, or explosive composite hot-rolling.

Download or read book GB T 32468 2015 Translated English of Chinese Standard GBT 32468 2015 GB T32468 2015 GBT32468 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-07 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, requirements, test methods, inspection rules, symbols, packaging, transportation, storage, quality certificate, and content of the order form (or contract) of the copper clad aluminum plate, sheets and strips.

Download or read book GB T 889 1 2015 Translated English of Chinese Standard GBT 889 1 2015 GB T889 1 2015 GBT889 1 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-01-08 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 889 specifies type sizes, technical conditions and marks of prevailing torque type hexagon nuts (with non-metallic insert), style 1.

Download or read book GB T 32185 2015 Translated English of Chinese Standard GBT 32185 2015 GB T32185 2015 GBT32185 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-07 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, package, mark, transportation, storage, and purchasing order (contract) contents of the titanium alloy large-size bars.

Download or read book TB TB T TBT Product Catalog Translated English of Chinese Standard TB TB T TBT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese Industry Standards - Category: TB; TB/T; TBT.

Download or read book YS T 298 2015 Translated English of Chinese Standard YST 298 2015 YS T298 2015 YST298 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-16 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marking, package, transportation, storage, quality certificate, ordering list (or contract) contents of the high titanium slag. This Standard is applicable to the high titanium slag used by titanium tetrachloride, artificial rutile and titanium pigment with titanic iron ore as raw materials, and producing by electric furnace smelting.

Download or read book JB T 7065 2015 Translated English of Chinese Standard JBT 7065 2015 JB T7065 2015 JBT7065 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-09-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, structure type, product model, product specifications and installation dimensions, technical requirements, test items and test requirements, marking, packaging, transportation, storage and exit-factory documents of pressure relief valves.

Download or read book YS T 231 2015 Translated English of Chinese Standard YST 231 2015 YS T231 2015 YST231 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-06-03 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marks, package, transportation, storage, quality certificate and orders (or contracts) for the tungsten concentrate. This Standard applies to tungsten concentrate products selected in mine; it can be used for producing ammonium paratungstate, tungstic acid, ammonium metatungstate, tungsten oxide etc.

Download or read book GB T 6170 2015 Translated English of Chinese Standard GBT 6170 2015 GB T6170 2015 GBT6170 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-01-17 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the type and dimension, technical conditions and markings of hexagon nuts, style 1.

Download or read book YBB 00322004 2015 Translated English of Chinese Standard YBB00322004 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-01-20 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard applies to the test for penetration force of injection closures. Penetration force refers to the maximum force value of puncture devices penetrating rubber stoppers or liners in a penetration test, expressed in N.

Download or read book TB T 2843 2007 Translated English of Chinese Standard TBT 2843 2007 TB T2843 2007 TBT2843 2007 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-10-05 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies classification, basic performances, requirements, test methods, inspection rules, marking, packaging, storage and transportation of elastic rubber parts for railways. This Standard applies to elastic rubber parts for shock absorption, buffer, flexible connection, limiting, etc. in hanging system, equipment installation system, connection, limiting positions, etc. of railways.