Download or read book Tank Linings for Chemical Process Industries written by V. C. Chandrasekaran and published by Smithers Rapra Technology. This book was released on 2009-01-01 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber linings can be used as passive protection against the corrosion of plant and equipment in the chemical process industries. Rubbers act as sacrificial materials reacting or un-reacting with the corrosive media, diffusing the liquids or not diffusing, swelling by itself or not swelling, permeating or not permeating gases or fumes, abrading or wearing by the slurry particles, getting ozonised or oxidised; but still protecting the metal surface beneath it, during its considerable life cycle under those severe and stressed conditions. Rubbers age but their life cycle is good enough to protect the metals against corrosion and erosion. The raw material bases are natural or synthetic rubbers. Rubber is used for corrosion/abrasion proof linings, more than any other material because of its proven superiority in this service at a relatively low cost. Fertilizer, electroplating, ore-refining, petrochemicals, chlor-alkali and paper industries invariably turn to rubber linings, in preference to other types of linings for their high resistance to corrosion and abrasion. Moreover the variety of rubbers, both natural and man-made, available and its flexibility to serve under wide temperature and pressure ranges, made rubber linings as the world-wide accepted anti-corrosive and anti-abrasive media. This book describes exactly how to use rubber as a lining in tanks and how to overcome problems associated with this technique.
Download or read book Handbook of Thermal Spray Technology written by Joseph R. Davis and published by ASM International. This book was released on 2004-01-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th
Download or read book Handbook for Chemical Process Industries written by Himanshu J Patel and published by CRC Press. This book was released on 2023-10-06 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical processing industry plays a pivotal role in the economy of a country, as chemicals are required in every sphere of our lives. This book covers chemical processing of dyes, pigments, drugs and pharmaceutical products, fermented products, agrochemicals, explosives, polymers, Period II and III chemicals, chemicals, sugar, coatings, starches, soaps and detergents, paper, pulp, glass, and cement. It includes sources of natural materials, collection process, purification, and extraction of different chemicals from natural materials like petroleum, coal and ores from the Earth. It includes manufacturing details of C1 to C4 and aromatic compounds obtained from natural materials. The book covers both traditional and modern sectors of the chemical processing industry. It provides knowledge on the properties of the chemical and manufacturing process (such as raw materials, chemical reactions, quantitative requirement, flow sheet diagram, procedure) and its uses. The book is based on the author's expertise and has been developed with an awareness of the quantitative requirement for manufacturing chemicals. Data has been collected from industry, thus it will be useful to industry personnel, research groups, academicians and institutional organizations.
Download or read book Materials Handbook written by François Cardarelli and published by Springer. This book was released on 2018-07-09 with total page 2254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique and practical Materials Handbook (third edition) provides quick and easy access to the physical and chemical properties of very many classes of materials. Its coverage has been expanded to include whole new families of materials such as minor metals, ferroalloys, nuclear materials, food, natural oils, fats, resins, and waxes. Many of the existing families—notably the metals, gases, liquids, minerals, rocks, soils, polymers, and fuels—are broadened and refined with new material and up-to-date information. Several of the larger tables of data are expanded and new ones added. Particular emphasis is placed on the properties of common industrial materials in each class. After a chapter introducing some general properties of materials, each of twenty-four classes of materials receives attention in its own chapter. The health and safety issues connected with the use and handling of industrial materials are included. Detailed appendices provide additional information on subjects as diverse as crystallography, spectroscopy, thermochemical data, analytical chemistry, corrosion resistance, and economic data for industrial and hazardous materials. Specific further reading sections and a general bibliography round out this comprehensive guide. The index and tabular format of the book makes light work of extracting what the reader needs to know from the wealth of factual information within these covers. Dr. François Cardarelli has spent many years compiling and editing materials data. His professional expertise and experience combine to make this handbook an indispensable reference tool for scientists and engineers working in numerous fields ranging from chemical to nuclear engineering. Particular emphasis is placed on the properties of common industrial materials in each class. After a chapter introducing some general properties of materials, materials are classified as follows. ferrous metals and their alloys; ferroalloys; common nonferrous metals; less common metals; minor metals; semiconductors and superconductors; magnetic materials; insulators and dielectrics; miscellaneous electrical materials; ceramics, refractories and glasses; polymers and elastomers; minerals, ores and gemstones; rocks and meteorites; soils and fertilizers; construction materials; timbers and woods; fuels, propellants and explosives; composite materials; gases; liquids; food, oils, resin and waxes; nuclear materials. food materials
Download or read book Practical Quality Management in the Chemical Process Industry written by Morton E. Bader and published by CRC Press. This book was released on 2020-07-24 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a manual for designing and operating a basic quality management program; a practical discussion of what is needed and how to fulfill those needs on a practical basis. It will be helpful to chemical engineers, plant laboratory managers and those interested in quality management.
Download or read book Fluoropolymer Applications in the Chemical Processing Industries written by Sina Ebnesajjad and published by William Andrew. This book was released on 2004-12-02 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a self-contained collection of data and information on applications of fluoropolymers components for corrosion control in chemical processing industries. Due to their superior properties, fluoropolymers have been rapidly replacing metal alloys for preserving the purity of processing streams in the chemical processing, plastics, food, pharmaceutical, semiconductor, and pulp and paper industries.
Download or read book Technology of Fluoropolymers written by Jiri G. Drobny and published by CRC Press. This book was released on 2023-04-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been updated and expanded, providing industrial chemists, technologists, environmental scientists, and engineers with an accurate, compact, and practical source of information on fluoropolymers. Highlighting existing and new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and processing conditions. It explores breakthroughs in understanding property-structure relationships, new polymerization techniques, and the chemistry underlying polymers, such as melt-processable fluoroplastics. It also expands on the important properties of fluoropolymers, including heat and radiation degradation, health effects, and recycling. Features: Revised, updated, and expanded to continue to provide an accurate, compact, and practical source of information on fluoropolymers Explores the property-structure relationships, polymerization techniques, and the chemistry underlying polymers Fluoropolymers rank high on the specialty polymers group and, due to their unique properties, are naturally part of the solution to the industrial sustainability challenges of the twenty-first century Describes the technology of fluoropolymers, including thermoplastic and elastomeric products Expands upon the important characteristics of fluoropolymers and their recycling.
Download or read book Corrosion Control in the Chemical Process Industries written by C. P. Dillon and published by New York ; Toronto : McGraw-Hill. This book was released on 1986 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lightweight Materials written by Flake C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Michael L. Berins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.
Download or read book Corrosion Resistant Linings and Coatings written by Philip A. Schweitzer, P.E. and published by CRC Press. This book was released on 2001-07-18 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of specific coatings and solid sheet and liquid applied linings, focusing on surface preparation, installation, and applicaton and detailing physical, mechanical, and overall corrosion resisitance. It compares and contrasts individual linings and coatings including glass, cement, various paints for concrete, and metallic and polymer-based coatings. Then it examines the effects of temperature extremes such as coalescence, sagging and slumping, leveling, and adhesion. The book includes an analysis of organic, metallic, and monolithic coatings and paints for concrete and assesses polyester, acrylic, and urethane coatings that offer atmospheric protection.
Download or read book Rubber as a Construction Material for Corrosion Protection written by V. C. Chandrasekaran and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book on rubber used as a construction material dedicated to the chemical process industry Despite the long history of rubber as a construction material, this book is a unique publication as it comprehensively looks at the material with respect to the anti-corrosion requirements of the multitude of industries where rubber is used, both on land and offshore. This guide documents how rubber reliably meets the threats of corrosion and contributes to the longevity of the equipment. Chapters on ebonite, natural, and synthetic rubbers, examine their relevant properties and chemical resistance. The book details the practical aspects and handling of rubber lined equipment: thin-walled structures, vacuum vessels, ducts, large diameter tanks, agitators, and fully lined pipes (both inside and outside). Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards. Several case studies are included demonstrating the preferential choice of rubber as a construction material as well as practical applications and techniques of its usage in the chlor-alkali, fertilizer, mineral processing and other core chemical processing industries, which are the largest consumers of rubber as a material of construction. The volume ends with a section on aging and prediction of service life. Rubber as a Construction Material for Corrosion Protection will be used by chemical engineers, rubber technologists, students, research workers worldwide in the rubber industry and process industries such as fertilizer, mining and ore, oil & gas, paper and pulp, steel plants, as well as people engaged in corrosion protection. The book will also be very useful to the construction industry.
Download or read book Anticorrosive Rubber Lining written by Chellappa Chandrasekaran and published by William Andrew. This book was released on 2017-05-23 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anticorrosive Rubber Lining discusses the state-of-the-art in this evolving industry, including sections on the best materials and formulations to use, what's best for a particular application, which repair technique is best for a given application, how long a rubber lining is likely to last, vulcanization parameters, and more. This book deals with the important field of anticorrosive rubber lining and its applications in various industries, including oil and gas, nuclear, aerospace, maritime, and many more, highlighting many of the technological aspects involved. The author offers a unique perspective due to the exclusiveness of the case histories presented, including many industrial rubber lining practices which are mostly kept within the industry. The technical information on rubber presented here is a practical tool to enable engineers to make the best use of rubber linings to prevent corrosion in chemical plants. The book includes valuable insights into bonding systems, surface preparation, and coating methodologies, and also covers failure analysis of failed systems. Includes up-to-date technical information on special compounding and processing technology of recently developed synthetic rubbers Provides detailed case studies from industry sectors, including aerospace, nuclear energy, and mining Presents rare, valuable insider knowledge of current industry practice
Download or read book Fluoroplastics written by Jiri George Drobny and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymers were discovered accidentally by Plunkett in 1938. He was working on freon and accidentally polymerised tetrafluoroethylene. The result was polytetrafluoroethylene (PTFE), more commonly known as Teflon. PTFE is inert to virtually all chemicals and is considered to be the most slippery material in existence - it has the lowest coefficient of friction of any known solid material. These properties have made it one of the most valuable and versatile technologies ever invented, contributing to significant advancements in areas such as aerospace, communications, electronics, industrial.
Download or read book Encyclopedia of Chemical Processing and Design written by John J. McKetta Jr and published by CRC Press. This book was released on 1988-03-14 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written by engineers for engineers (with over 150 International Editorial Advisory Board members),this highly lauded resource provides up-to-the-minute information on the chemical processes, methods, practices, products, and standards in the chemical, and related, industries. "
Download or read book Industrial Chemical Thesaurus Volume 1 written by and published by John Wiley & Sons. This book was released on 2006-12-05 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work contains approximately 40,000 international tradenames by which more than 6000 generic chemicals are known and marketed worldwide. This set enables the user to locate the tradename equivalent of generic chemicals. They also provide extensive information about the generic chemicals and includes a separate listing of tradename products containing the chemical entry as a major constituent. Volume 1 features chemical to tradename references and volume 2 is a tradename to chemical cross reference and manufacturers directory.
Download or read book High Performance Engineering Plastics written by D.J. Kemmish and published by iSmithers Rapra Publishing. This book was released on 1995 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reviews and compares the properties of the four categories of materials which fall within the subject area: polyarylethers and thioethers; polyimides and polybenzimidazole; fluoropolymers; and thermotropic liquid crystalline polymers. The report is completed by an indexed section containing more than 400 references and abstracts selected from the Rapra Polymer Library database.
