Download or read book Tandem Mooring and Offloading Guidelines for Conventional Tankers at F P SO Facilities written by Oil Companies International Marine Forum and published by . This book was released on 2009 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to familiarise Masters, ship operators, F(P)SO Operators and project development teams with the general principles and equipment involved in F(P)SO - CT operations, these guidelines provide an understanding of the issues including design, equipment, operations, and environmental limitations in operation.
Download or read book Manual on Oil Pollution written by International Maritime Organization and published by IMO Publishing. This book was released on 2011 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practical guidance related to the prevention of pollution from ships, and describes procedures for the handling of oil cargoes, bunkering, ship-to-ship transfer operations, transfer operations involving offshore units and operations in ice-covered waters. Provides also an overview of the various prevention practices, as a complement to the more detailed industry standards and Codes of Practice, currently available.
Download or read book Recommendations for Equipment Employed in the Bow Mooring of Conventional Tankers at Single Point Moorings written by and published by . This book was released on 2007 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: An industry guide for the tandem mooring of conventional tankers at FPSO/FSOS using the same shipboard mooring equipment as recommended for all SPMs.
Download or read book Guidelines for Offshore Tanker Operations written by and published by . This book was released on 2018 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Offshore Technology Conference written by and published by . This book was released on 2000 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ship Shaped Offshore Installations written by Jeom Kee Paik and published by Cambridge University Press. This book was released on 2007-01-15 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship-shaped offshore units are some of the more economical systems for the development of offshore oil and gas, and are often preferred in marginal fields. These systems are especially attractive to develop oil and gas fields in deep and ultra-deep water areas and remote locations away from existing pipeline infrastructures. Recently, the ship-shaped offshore units have been applied to near shore oil and gas terminals. This 2007 text is an ideal reference on the technologies for design, building and operation of ship-shaped offshore units, within inevitable space requirements. The book includes a range of topics, from the initial contracting strategy to decommissioning and the removal of the units concerned. Coverage includes both fundamental theory and principles of the individual technologies. This book will be useful to students who will be approaching the subject for the first time as well as designers working on the engineering for ship-shaped offshore installations.
Download or read book Single Point Moorings written by Roger Maari and published by . This book was released on 1985 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book JPT Journal of Petroleum Technology written by and published by . This book was released on 2007-07 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fairplay World Ports Directory written by and published by . This book was released on 1995 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mooring System Engineering for Offshore Structures written by Kai-Tung Ma and published by Gulf Professional Publishing. This book was released on 2019-06-04 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mooring system is a vital component of various floating facilities in the oil, gas, and renewables industries. However, there is a lack of comprehensive technical books dedicated to the subject. Mooring System Engineering for Offshore Structures is the first book delivering in-depth knowledge on all aspects of mooring systems, from design and analysis to installation, operation, maintenance and integrity management. The book gives beginners a solid look at the fundamentals involved during mooring designs with coverage on current standards and codes, mooring analysis and theories behind the analysis techniques. Advanced engineers can stay up-to-date through operation, integrity management, and practical examples provided. This book is recommended for students majoring in naval architecture, marine or ocean engineering, and allied disciplines in civil or mechanical engineering. Engineers and researchers in the offshore industry will benefit from the knowledge presented to understand the various types of mooring systems, their design, analysis, and operations. Understand the various types of mooring systems and the theories behind mooring analysis Gain practical experience and lessons learned from worldwide case studies Combine engineering fundamentals with practical applications to solve today’s offshore challenges
Download or read book Effective Mooring written by OCIMF. and published by . This book was released on 2019 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mooring is one of the most complex and dangerous operations for ship and terminal crew. If something goes wrong, the consequences can be severe. Effective Mooring gives crew a general introduction to mooring and guidance on how to stay safe during mooring operations. It is written in an easy-to-understand style for seafarers worldwide and can be used as a training guide for both new and experienced crew. Produced by the Oil Companies International Marine Forum (OCIMF), the book is written for crew on board oil tankers, barges and terminals, but the principles can be applied to any vessel.
Download or read book Offshore Risk Assessment written by Jan-Erik Vinnem and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Risk Assessment is the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for some years in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions. The book starts with a thorough discussion of risk analysis methodology. Subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems. Separate chapters analyze the main hazards of offshore structures: Fire, explosion, collision and falling objects. Risk mitigation and control are then discussed, followed by an outline of an alternative approach to risk modelling that focuses especially on the risk of short-duration activities. Not only does the book describe the state of the art of QRA, it also identifies weaknesses and areas that need development. Readership: Besides being a comprehensive reference for academics and students of marine/offshore risk assessment and management, the book should also be owned by professionals in the industry, contractors, suppliers, consultants and regulatory authorities.
Download or read book Offshore Operation Facilities written by Huacan Fang and published by Gulf Professional Publishing. This book was released on 2014-09-05 with total page 1177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Operation Facilities: Equipment and Procedures provides new engineers with the knowledge and methods that will assist them in maximizing efficiency while minimizing cost and helps them prepare for the many operational variables involved in offshore operations. This book clearly presents the working knowledge of subsea operations and demonstrates how to optimize operations offshore. The first half of the book covers the fundamental principles governing offshore engineering structural design, as well as drilling operations, procedures, and equipment. The second part includes common challenges of deep water oil and gas engineering as well as beach (shallow) oil engineering, submarine pipeline engineering, cable engineering, and safety system engineering. Many examples are included from various offshore locations, with special focus on offshore China operations. In the offshore petroleum engineering industry, the ability to maintain a profitable business depends on the efficiency and reliability of the structure, the equipment, and the engineer. Offshore Operation Facilities: Equipment and Procedures assists engineers in meeting consumer demand while maintaining a profitable operation. Comprehensive guide to the latest technology, strategies, and best practices for offshore operations Step-by-step approach for dealing with common challenges such as deepwater and shallow waters Includes submarine pipeline, cable engineering, and safety system engineering Unique examples from various offshore locations around the world, with special focus on offshore China
Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2012-01-13 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea production systems, overview of subsea engineering, subsea field development, subsea distribution system. Flow assurance and system engineering. Susea structure and equiment. Subsea umbilical, risers and flowlines.
Download or read book Recommendations for Oil Tanker Manifolds and Associated Equipment written by Oil Companies International Marine Forum and published by Hyperion Books. This book was released on 1991-01-01 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Previous ed. titled: Standards for oil tanker manifolds and associated equipment / Oil Companies International Marine Forum, 3rd ed., 1981.
Download or read book W rtsil Encyclopedia of Ship Technology written by and published by . This book was released on 2015 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Offshore Oil and Gas Operations written by James G. Speight and published by Elsevier. This book was released on 2014-10-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. Quickly become familiar with the oil and gas offshore industry, including deepwater operations Understand the full spectrum of the business, including environmental impacts and future challenges Gain knowledge and exposure on critical standards and real-world case studies
