Download or read book Tailoring the Properties of Metals Through Ion Beam Modification written by and published by . This book was released on 2014 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Download or read book Ion Beam Modification of Metals written by Fadeĭ Fadeevich Komarov and published by Routledge. This book was released on 1992 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Translated from the 1990 Russian work published by Metallurgiya (Moscow). Komarov draws largely on his own research (and 590 references) to address the problems associated with directional ion beam modification of the physicochemical properties of the near- surface regions of metal and alloys. He examines the primary processes accompanying the passage of fast ions in crystals and secondary processes such as annealing and ageing; and he shows the possibilities for using ion beam alloying for controlling the mechanical, tribological, corrosion, and catholytic properties of metals and alloys. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Ion Beam Modification of Metals Mechanical Properties and Structure written by James W. Mayer and published by . This book was released on 1989 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this work was to study the phase transformations and property changes of metals bought about by ion beam induced materials modification and then to use this information to produce stable surface layers exhibiting optimal chemical and mechanical integrity. Summary of Most significant Results: 1) Amorphous alloys can be formed by ion mixing a wide variety of metal systems within defined regions of atomic composition. 2) Two step processing such as implanting Carbon and Nitrogen into ion beam mixed layers improves the friction behavior. 3) Iron-Titanium mixed on stainless steel and implanted with N and C results in a wear resistant layer that deforms to depths greater than the thickness of the modified layer. 4) These novel structures on stainless steel were used to demonstrate a technique for distinguishing between deformation and material removal on worn surfaces. 5) Mixing substantial amounts of gold into Ti improves corrosion resistance of the Ti without appreciably degrading the wear and friction behavior. (aw).
Download or read book Surface Modification of Metals by Ion Beams 7 written by and published by . This book was released on 1992 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Modification by High fluence Ion Beams written by Roger Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute on Materials Modification by High-Fluence Ion Beams, Viana do Castelo, Portugal, August 24-September 4, 1987
Download or read book Applications of Ion Beams to Metals written by S. Picraux and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conferences have been held in the past on atomic collision phenomena and on the applications of ion beams to semiconductors. However, within the past year it became apparent that there is a growing new area of active research involving the use of ion beams to modify and study the basic properties of metals. As a result a topical conference was organized to bring together for the first time scientists with a wide range of backgrounds and interests related to this field. This book contains the proceed ings of the International Conference on Applications of Ion Beams to Metals which was held in Albuquerque, New Mexico, October 2-4, 1973. Much of the work presented herein represents ideas and concepts which have had little or no previous exposure in the open literature. The application of ion beams to superconducting prop erties for example is quite new, as is the chapter on ion induced surface reactions, which includes primarily oxidation and corrosion studies of implanted materials. These areas, as well as the chapter on implantation alloy formation, indicate important future areas of the application of ion beams to metals. A reading of the chapters on superconductivity and on oxida tion and corrosion can serve to bring one up to date on nearly all the existing information in these areas of the ion beam mod ification of metals. A broad perspective of the oxidation area is given in the invited paper by G. Dearnaley.
Download or read book Swift Heavy Ions for Materials Engineering and Nanostructuring written by Devesh Kumar Avasthi and published by Springer Science & Business Media. This book was released on 2011-05-24 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion beams have been used for decades for characterizing and analyzing materials. Now energetic ion beams are providing ways to modify the materials in unprecedented ways. This book highlights the emergence of high-energy swift heavy ions as a tool for tailoring the properties of materials with nanoscale structures. Swift heavy ions interact with materials by exciting/ionizing electrons without directly moving the atoms. This opens a new horizon towards the 'so-called' soft engineering. The book discusses the ion beam technology emerging from the non-equilibrium conditions and emphasizes the power of controlled irradiation to tailor the properties of various types of materials for specific needs.
Download or read book Ion Beam Modification of Materials written by J.S. Williams and published by Newnes. This book was released on 2012-12-02 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference consisted of 15 oral sessions, including three plenary papers covering areas of general interest, 22 specialist invited papers and 51 contributed presentations as well as three poster sessions. There were several scientific highlights covering a diverse spectrum of materials and ion beam processing methods. These included a wide range of conventional and novel applications such as: optical displays and opto-electronics, motor vehicle and tooling parts, coatings tailored for desired properties, studies of fundamental defect properties, the production of novel (often buried) compounds, and treating biomedical materials. The study of nanocrystals produced by ion implantation in a range of host matrices, particularly for opto-electronics applications, was one especially new and exciting development. Despite several decades of study, major progress was reported at the conference in understanding defect evolution in semiconductors and the role of defects in transient impurity diffusion. The use of implantation to tune or isolate optical devices and in forming optically active centres and waveguides in semiconductors, polymers and oxide ceramics was a major focus of several presentations at the conference. The formation of hard coatings by ion assisted deposition or direct implantation was also an area which showed much recent progress. Ion beam techniques had also developed apace, particularly those based on plasma immersion ion implantation or alternative techniques for large area surface treatment. Finally, the use of ion beams for the direct treatment of cancerous tissue was a particularly novel and interesting application of ion beams.
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Download or read book Ion Beam Modification of Solids written by Werner Wesch and published by Springer. This book was released on 2016-07-14 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the method of ion beam modification of solids in realization, theory and applications in a comprehensive way. It provides a review of the physical basics of ion-solid interaction and on ion-beam induced structural modifications of solids. Ion beams are widely used to modify the physical properties of materials. A complete theory of ion stopping in matter and the calculation of the energy loss due to nuclear and electronic interactions are presented including the effect of ion channeling. To explain structural modifications due to high electronic excitations, different concepts are presented with special emphasis on the thermal spike model. Furthermore, general concepts of damage evolution as a function of ion mass, ion fluence, ion flux and temperature are described in detail and their limits and applicability are discussed. The effect of nuclear and electronic energy loss on structural modifications of solids such as damage formation, phase transitions and amorphization is reviewed for insulators and semiconductors. Finally some selected applications of ion beams are given.
Download or read book Ion Beam Techniques and Applications written by Ishaq Ahmad and published by BoD – Books on Demand. This book was released on 2020-06-10 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide variety of ion beam techniques are being used in several versatile applications ranging from environmental science, nuclear physics, microdevice fabrication to materials science. In addition, new applications of ion beam techniques across a broad range of disciplines and fields are also being discovered frequently. In this book, the latest research and development on progress in ion beam techniques has been compiled and an overview of ion beam irradiation-induced applications in nanomaterial-focused ion beam applications, ion beam analysis techniques, as well as ion implantation application in cells is provided. Moreover, simulations of ion beam-induced damage to structural materials of nuclear fusion reactors are also presented in this book.
Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting
Download or read book Ion Beam Applications written by Ishaq Ahmad and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion beam of various energies is a standard research tool in many areas of science, from basic physics to diverse areas in space science and technology, device fabrications, materials science, environment science, and medical sciences. It is an advance and versatile tool to frequently discover applications across a broad range of disciplines and fields. Moreover, scientists are continuously improving the ion beam sources and accelerators to explore ion beam at the forefront of scientific endeavours. This book provides a glance view on MeV ion beam applications, focused ion beam generation and its applications as well as practical applications of ion implantation.
Download or read book Review written by Oak Ridge National Laboratory and published by . This book was released on 1983 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Physics written by Dr. Shinde Sambhaji D and published by Lulu.com. This book was released on with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
