Download or read book Thermodynamic Properties in SI written by William C. Reynolds and published by . This book was released on 1979 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steam Tables written by Joseph H. Keenan and published by Wiley. This book was released on 1969-01-16 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steam Tables Thermodynamic Properties of Water Including Vapor, Liquid, and Solid Phases —English Units By Joseph H. Keenan, M.I.T.; Frederick G. Keyes, M.I.T.; Philip G. Hill, Queen’s University; and Joan G. Moore, M.I.T. During the past decade a substantial body of experimental data on thermodynamic and transport properties of water has been produced and published by research groups in the USSR, Great Britain, Czechoslovakia, Canada and the United States. This book presents the results of a new and independent correlation of all this new thermodynamic data and all previously existing data. It is a new work to replace the well-known and widely used Keenan and Keyes tables. The tables in this new book are based upon a unique accomplishment. For the first time the whole body of high-quality experimental data on liquid and vapor water has been faithfully represented by a single fundamental equation. From this equation all thermodynamic properties can be calculated for any state. This equation is believed to extrapolate dependably in temperature from the upper limit of precise measurement (about 1500°F) to about 2400°F. Because of the increasing importance to both the practicing engineer and the student of a wide variety of problems that cannot be approximated by steady-flow idealization, internal energies are tabulated for all states: saturated liquid and vapor, compressed liquid, and superheated vapor. A reasonable range of metastable states is covered as extensions of the superheated-vapor and compressed-liquid tables. The Mollier and temperature-entropy charts are extended to substantially higher pressures and temperatures. This book also includes a table for ice-vapor equilibrium, an improved chart of isentropic exponents, charts of Prandtl number, a set of charts of heat capacity of liquid and vapor, and extensive tables of viscosity and thermal conductivity reproduced from the documents of the Sixth International Conference on the Properties of Steam. The book features legible type set by a computer-controlled typesetting machine. This results in accuracy, compactness, and convenience.
Download or read book Heat transfer written by Yunus Ali Cengel and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steam and Gas Tables with Computer Equations written by Thomas F. Jr. Irving and published by Elsevier. This book was released on 2012-12-02 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steam and Gas Tables with Computer Equations presents tables illustrating the thermodynamic properties of steam and air, along with computer equations. Additional equations for a number of other gaseous substances which are useful in engineering investigations are included. This book is comprised of two chapters and begins with a discussion on the thermodynamic properties of steam, which can be divided into saturation and superheat properties. The various thermodynamic properties, including saturation temperature and pressure and liquid and vapor saturation entropy, are represented with three basic types of equations from the triple point to the critical point. The accuracy of the properties calculated from the base data is also considered. The next chapter deals with the thermodynamic properties of air and other gases (ethane, hydrogen, methane, nitrogen, oxygen propane, n-butane), including those properties which are useful in engineering design and analysis (specific heat at constant pressure and volume, enthalpy and entropy function, isentropic pressure function, etc). This monograph will serve as a useful guide for chemists, mathematicians, and computer programmers and scientists.
Download or read book International Steam Tables Properties of Water and Steam based on the Industrial Formulation IAPWS IF97 written by Wolfgang Wagner and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: These steam tables have been calculated using the international standard for the thermodynamic properties of water and steam, the IAPWS-IF97 formulation, and the international standards for transport and other properties. In addition, the complete set of equations of IAPWS-IF97 is presented including all supplementary backward equations adopted by IAPWS between 2001 and 2005 for fast calculations of heat cycles, boilers, and steam turbines.
Download or read book Property Tables Booklet for Thermodynamics written by Yunis A. Cengel and published by McGraw-Hill Europe. This book was released on 2014 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The NBS Tables of Chemical Thermodynamic Properties written by Donald D. Wagman and published by . This book was released on 1982 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals and Applications of Renewable Energy written by Mehmet Kanoglu and published by McGraw Hill Professional. This book was released on 2019-06-14 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the principles and applications of today’s renewable energy sources and systems Written by a team of recognized experts and educators, this authoritative textbook offers comprehensive coverage of all major renewable energy sources. The book delves into the main renewable energy topics such as solar, wind, geothermal, hydropower, biomass, tidal, and wave, as well as hydrogen and fuel cells. By stressing real-world relevancy and practical applications, Fundamentals and Applications of Renewable Energy helps prepare students for a successful career in renewable energy. The text contains detailed discussions on the thermodynamics, heat transfer, and fluid mechanics aspects of renewable energy systems in addition to technical and economic analyses. Numerous worked-out example problems and over 850 end-of-chapter review questions reinforce main concepts, formulations, design, and analysis. Coverage includes: Renewable energy basics Thermal sciences overview Fundamentals and applications of Solar energy Wind energy Hydropower Geothermal energy Biomass energy Ocean energy Hydrogen and fuel cells • Economics of renewable energy • Energy and the environment
Download or read book Nbs Nrc Steam Tables written by Lester Haar and published by CRC Press. This book was released on 1984-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Thermodynamic Tables of the Fluid State written by S. Angus and published by Elsevier. This book was released on 2013-10-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Thermodynamic Tables of the Fluid State - 7 Propylene (Propene) is a compilation of internationally agreed values of the equilibrium thermodynamic properties of propylene. This book is composed of three chapters, and begins with the presentation of experimental result of thermodynamic studies compared with the equations used to generate the tables. The succeeding chapter deals with correlating equations for thermodynamic property determination of propylene. The last chapter provides the tabulations of the propylene's thermodynamic properties and constants. This book will prove useful to physical chemists.
Download or read book ASME Steam Tables written by and published by . This book was released on 2006 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of Saturated and Superheated Steam in U.S. Customary and SI Units from the IAPWS-IF97 International Standard for Industrial Use. Prepared by the ASME Research and Technology Committee on Water and Steam in Thermal Systems, Subcommittee on Properties of Steam
Download or read book Fundamentals of Thermodynamics written by Claus Borgnakke and published by . This book was released on 2013-06-27 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in a new edition, this book continues to set the standard for teaching readers how to be effective problem solvers, emphasizing the authors's signature methodologies that have taught over a half million students worldwide. This new edition provides a student-friendly approach that emphasizes the relevance of thermodynamics principles to some of the most critical issues of today and coming decades, including a wealth of integrated coverage of energy and the environment, biomedical/bioengineering, as well as emerging technologies. Visualization skills are developed and basic principles demonstrated through a complete set of animations that have been interwoven throughout.
Download or read book Fundamentals of Heat and Mass Transfer written by T. L. Bergman and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 2249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Heat and Mass Transfer, 7th Edition is the gold standard of heat transfer pedagogy for more than 30 years, with a commitment to continuous improvement by four authors having more than 150 years of combined experience in heat transfer education, research and practice. Using a rigorous and systematic problem-solving methodology pioneered by this text, it is abundantly filled with examples and problems that reveal the richness and beauty of the discipline. This edition maintains its foundation in the four central learning objectives for students and also makes heat and mass transfer more approachable with an additional emphasis on the fundamental concepts, as well as highlighting the relevance of those ideas with exciting applications to the most critical issues of today and the coming decades: energy and the environment. An updated version of Interactive Heat Transfer (IHT) software makes it even easier to efficiently and accurately solve problems.
Download or read book Steam Tables written by C. P. Kothandaraman and published by New Age International. This book was released on 2007 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: # Extensive Table Of Properties Of Saturated Steam Both Temperature Based And Pressure Based# Elaborate Table Of Properties Of Superheated Steam With All Required Properties Readable At One Glance# Table Of Van Der Waalls Constants And Critical Compressibility Factor For Gases# Table Of Enthalpy Of Formation And Higher And Lower Heating Values Of Fuels# Table Of Thermodynamic Properties Of Gases# Table Of Thermal Properties Of Saturated Water# Mollier Chart For Steam# Psychrometric Chart# Generalized Compressibility Chart
Download or read book Tables of Thermodynamic Properties of Ammonia written by United States. Bureau of Standards and published by . This book was released on 1923 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermodynamic Properties of Helium written by Vi︠a︡cheslav Vladimirovich Sychev and published by Chem/Mats-Sci/E. This book was released on 1987 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Properties of Gases and Liquids 5E written by Bruce E. Poling and published by McGraw Hill Professional. This book was released on 2000-11-27 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have reference for processes involving liquids, gases, and mixtures Reap the time-saving, mistake-avoiding benefits enjoyed by thousands of chemical and process design engineers, research scientists, and educators. Properties of Gases and Liquids, Fifth Edition, is an all-inclusive, critical survey of the most reliable estimating methods in use today --now completely rewritten and reorganized by Bruce Poling, John Prausnitz, and John O’Connell to reflect every late-breaking development. You get on-the-spot information for estimating both physical and thermodynamic properties in the absence of experimental data with this property data bank of 600+ compound constants. Bridge the gap between theory and practice with this trusted, irreplaceable, and expert-authored expert guide -- the only book that includes a critical analysis of existing methods as well as hands-on practical recommendations. Areas covered include pure component constants; thermodynamic properties of ideal gases, pure components and mixtures; pressure-volume-temperature relationships; vapor pressures and enthalpies of vaporization of pure fluids; fluid phase equilibria in multicomponent systems; viscosity; thermal conductivity;diffusion coefficients; and surface tension.
