Download or read book Systems Reliability and Risk Analysis written by E.G. Frankel and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ernst G. Frankel This book has its origin in lecture notes developed over several years for use in a course in Systems Reliability for engineers concerned with the design of physical systems such as civil structures, power plants, and transport vehicles of all types. Increasing public concern with the reliability o~ systems for reasons of human safety, environmental protection, and acceptable ir. vestment risk limitations has resulted in an increasing interest by engineers in the formal applica~i0n of reliability theory to e~gineering desian. At the same time there is a demand for more effective approaches to the des~gn of procedures for the operation and use of man-made syste~s and more meaningful assessment of the risks intr)duction and use of such a system poses both when operating as designed and when operating at below design performance. The purpose of the book is to provide a sound, yet practical, introduction to reliability analysis and risk assessment which can be used by professionals in engineering, planning, management, and economics to improve the design, operation, and risk assessment of systems of interest. The text should be useful for students in many disciplines and is designed for fourth~year undergraduates or first-year graduate students. I would like to acknowledge the help of many of my graduate students who contributed to the development of this book by offering comments and criticism. Similarly I would like to thank Mrs.

Download or read book An Introduction to the Basics of Reliability and Risk Analysis written by Enrico Zio and published by World Scientific. This book was released on 2007 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: The necessity of expertise for tackling the complicated and multidisciplinary issues of safety and risk has slowly permeated into all engineering applications so that risk analysis and management has gained a relevant role, both as a tool in support of plant design and as an indispensable means for emergency planning in accidental situations. This entails the acquisition of appropriate reliability modeling and risk analysis tools to complement the basic and specific engineering knowledge for the technological area of application.Aimed at providing an organic view of the subject, this book provides an introduction to the principal concepts and issues related to the safety of modern industrial activities. It also illustrates the classical techniques for reliability analysis and risk assessment used in current practice.

Download or read book The Monte Carlo Simulation Method for System Reliability and Risk Analysis written by Enrico Zio and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monte Carlo simulation is one of the best tools for performing realistic analysis of complex systems as it allows most of the limiting assumptions on system behavior to be relaxed. The Monte Carlo Simulation Method for System Reliability and Risk Analysis comprehensively illustrates the Monte Carlo simulation method and its application to reliability and system engineering. Readers are given a sound understanding of the fundamentals of Monte Carlo sampling and simulation and its application for realistic system modeling. Whilst many of the topics rely on a high-level understanding of calculus, probability and statistics, simple academic examples will be provided in support to the explanation of the theoretical foundations to facilitate comprehension of the subject matter. Case studies will be introduced to provide the practical value of the most advanced techniques. This detailed approach makes The Monte Carlo Simulation Method for System Reliability and Risk Analysis a key reference for senior undergraduate and graduate students as well as researchers and practitioners. It provides a powerful tool for all those involved in system analysis for reliability, maintenance and risk evaluations.

Download or read book Reliability and Risk Analysis written by Terje Aven and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of reliability and risk is an important and integral part of planning, construction and operation of all technical systems. To be able to perform such analyses systematically and scientifically, there is usually a need for special methods and models. This book presents the most important of these. Particular emphasis has been placed on the ideas and the motivation for the use of the various methods and models. It has been an objective to compile a book which provides practising engineers and engineering graduates with the concepts and basic techniques for evaluating reliability and risk. It is hoped that the material presented will make them so familiar with the subject that they can carry out various types of analyses themselves and understand and make use of the more detailed applications and additional material which is available in the journals and publications associated with their own discipline. It has also been an objective to put reliability and risk analyses in context - how such analyses should be used in design and operation of components and systems. The material presented is modern and a large part of the book is at research level. The book focuses on analysis of repairable systems, not only non-repairable systems which have traditionally been given most attention in textbooks on reliability theory. Since most real-life systems are repairable, methods for analysing repairable systems are an important area of research. The book presents general methods, with most applications taken from offshore petro leum activities.

Download or read book Reliability and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2023-04-26 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated for a new edition, this book introduces reliability and risks analysis, for both practicing engineers and engineering students at the undergraduate and graduate levels. Since reliability analysis is a multidisciplinary subject, this book draws together a wide range of topics and presents them in a way that applies to most engineering disciplines. What Every Engineer Should Know About Reliability and Risk Analysis, Second Edition, emphasizes an introduction and explanation of the practical methods used in reliability and risk studies, with a discussion of their uses and limitations. It offers basic and advanced methods in reliability analysis that are commonly used in daily practice and provides methods that address unique topics such as dependent failure analysis, importance analysis, and analysis of repairable systems. The book goes on to present a comprehensive overview of modern probabilistic life assessment methods such as Bayesian estimation, system reliability analysis, and human reliability. End-of-chapter problems and a solutions manual are available to support any course adoptions. This book is refined, simple, and focuses on fundamentals. The audience is the beginner with no background in reliability engineering and rudimentary knowledge of probability and statistics. It can be used by new practitioners, undergraduates, and first-year graduate students.

Download or read book Risk Based Reliability Analysis and Generic Principles for Risk Reduction written by Michael T. Todinov and published by Elsevier. This book was released on 2006-11-03 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written with the intention to fill two big gaps in the reliability and risk literature: the risk-based reliability analysis as a powerful alternative to the traditional reliability analysis and the generic principles for reducing technical risk. An important theme in the book is the generic principles and techniques for reducing technical risk. These have been classified into three major categories: preventive (reducing the likelihood of failure), protective (reducing the consequences from failure) and dual (reducing both, the likelihood and the consequences from failure). Many of these principles (for example: avoiding clustering of events, deliberately introducing weak links, reducing sensitivity, introducing changes with opposite sign, etc.) are discussed in the reliability literature for the first time. Significant space has been allocated to component reliability. In the last chapter of the book, several applications are discussed of a powerful equation which constitutes the core of a new theory of locally initiated component failure by flaws whose number is a random variable. Offers a shift in the existing paradigm for conducting reliability analyses Covers risk-based reliability analysis and generic principles for reducing risk Provides a new measure of risk based on the distribution of the potential losses from failure as well as the basic principles for risk-based design Incorporates fast algorithms for system reliability analysis and discrete-event simulators Includes the probability of failure of a structure with complex shape expressed with a simple equation

Download or read book Reliability Engineering and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2016-11-25 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This undergraduate and graduate textbook provides a practical and comprehensive overview of reliability and risk analysis techniques. Written for engineering students and practicing engineers, the book is multi-disciplinary in scope. The new edition has new topics in classical confidence interval estimation; Bayesian uncertainty analysis; models for physics-of-failure approach to life estimation; extended discussions on the generalized renewal process and optimal maintenance; and further modifications, updates, and discussions. The book includes examples to clarify technical subjects and many end of chapter exercises. PowerPoint slides and a Solutions Manual are also available.

Download or read book Engineering applications of systems reliability and risk analysis written by [Anonymus AC00157681] and published by . This book was released on 1984 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Risk and Reliability Analysis written by Vijay P. Singh and published by Amer Society of Civil Engineers. This book was released on 2007 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Singh, Jain, and Tyagi present the key concepts of risk and reliability that apply to a wide array of problems in civil and environmental engineering.

Download or read book Reliability and Risk Analysis in Engineering and Medicine written by Chandrasekhar Putcha and published by Springer Nature. This book was released on 2021-11-19 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate textbook imparts the fundamentals of reliability and risk that can be connected mathematically and applied to problems in engineering and medical science and practice. The book is divided into eight chapters, the first three of which deal with basic fundamentals of probability theory and reliability methods. The fourth chapter illustrates simulation methods needed to solve complex problems. Chapters 5-7 explain reliability codes and system reliability (which uses the component reliabilities discussed in previous chapters). The book concludes in chapter 8 with an examination of applications of reliability within engineering and medical fields. Presenting a highly relevant competency for graduates entering product research and development, or facilities operations sectors, this text includes many examples and end of chapter study questions to maximize student comprehension. Explains concepts of reliability and risk estimation techniques in the context of medicine and engineering; Elucidates the interplay between reliability and risk from design to operation phases; Uses real world examples from engineering structures and medical devices and protocols; Adopts a lucid yet rigorous presentation of reliability and risk calculations; Reinforces students understanding of concepts covered with end-of-chapter exercises.

Download or read book Reliability Engineering and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2009-09-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools to Proactively Predict Failure The prediction of failures involves uncertainty, and problems associated with failures are inherently probabilistic. Their solution requires optimal tools to analyze strength of evidence and understand failure events and processes to gauge confidence in a design’s reliability. Reliability Engineering and Risk Analysis: A Practical Guide, Second Edition has already introduced a generation of engineers to the practical methods and techniques used in reliability and risk studies applicable to numerous disciplines. Written for both practicing professionals and engineering students, this comprehensive overview of reliability and risk analysis techniques has been fully updated, expanded, and revised to meet current needs. It concentrates on reliability analysis of complex systems and their components and also presents basic risk analysis techniques. Since reliability analysis is a multi-disciplinary subject, the scope of this book applies to most engineering disciplines, and its content is primarily based on the materials used in undergraduate and graduate-level courses at the University of Maryland. This book has greatly benefited from its authors' industrial experience. It balances a mixture of basic theory and applications and presents a large number of examples to illustrate various technical subjects. A proven educational tool, this bestselling classic will serve anyone working on real-life failure analysis and prediction problems.

Download or read book Computational Methods for Reliability and Risk Analysis written by Enrico Zio and published by World Scientific. This book was released on 2009 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates a number of modelling and computational techniques for addressing relevant issues in reliability and risk analysis. In particular, it provides: i) a basic illustration of some methods used in reliability and risk analysis for modelling the stochastic failure and repair behaviour of systems, e.g. the Markov and Monte Carlo simulation methods; ii) an introduction to Genetic Algorithms, tailored to their application for RAMS (Reliability, Availability, Maintainability and Safety) optimization; iii) an introduction to key issues of system reliability and risk analysis, like dependent failures and importance measures; and iv) a presentation of the issue of uncertainty and of the techniques of sensitivity and uncertainty analysis used in support of reliability and risk analysis.The book provides a technical basis for senior undergraduate or graduate courses and a reference for researchers and practitioners in the field of reliability and risk analysis. Several practical examples are included to demonstrate the application of the concepts and techniques in practice.

Download or read book Risk and Safety Analysis of Nuclear Systems written by John C. Lee and published by John Wiley & Sons. This book was released on 2012-01-12 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been developed in conjunction with NERS 462, a course offered every year to seniors and graduate students in the University of Michigan NERS program. The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used to analyze the unavailability of systems with repairs, fault trees and event trees used in probabilistic risk assessments (PRAs), and failure modes of systems. All of this material is general enough that it could be used in non-nuclear applications, although there is an emphasis placed on the analysis of nuclear systems. The second half of the book covers the safety analysis of nuclear energy systems, an analysis of major accidents and incidents that occurred in commercial nuclear plants, applications of PRA techniques to the safety analysis of nuclear power plants (focusing on a major PRA study for five nuclear power plants), practical PRA examples, and emerging techniques in the structure of dynamic event trees and fault trees that can provide a more realistic representation of complex sequences of events. The book concludes with a discussion on passive safety features of advanced nuclear energy systems under development and approaches taken for risk-informed regulations for nuclear plants.

Download or read book Reliability and Risk written by Paul Schulman and published by Stanford University Press. This book was released on 2016-04-13 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and continued functioning of critical infrastructures—such as electricity, natural gas, transportation, and water—is a social imperative. Yet the complex connections between these systems render them increasingly precarious. Furthermore, though we depend so heavily on interconnected infrastructures, we do not fully understand the risks involved in their failure. Emery Roe and Paul R. Schulman argue that designs, policies, and laws often overlook the knowledge and experiences of those who manage these systems on the ground—reliability professionals who have vital insights that would be invaluable to planning. To combat this major blind spot, the athors construct a new theoretical perspective that reveals how to make sense of complex interconnected networks and improve reliability through management, regulation, and political leadership. To illustrate their approach in action, they present a multi-year case study of one of the world's most important "infrastructure crossroads," the San Francisco Bay-Delta. Reliability and Risk advances our understanding of what it takes to ensure the dependability of the intricate—and sometimes hazardous—systems on which we rely every day.

Download or read book Reliability Assessment of Safety and Production Systems written by Jean-Pierre Signoret and published by Springer Nature. This book was released on 2021-03-23 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides, as simply as possible, sound foundations for an in-depth understanding of reliability engineering with regard to qualitative analysis, modelling, and probabilistic calculations of safety and production systems. Drawing on the authors’ extensive experience within the field of reliability engineering, it addresses and discusses a variety of topics, including: • Background and overview of safety and dependability studies; • Explanation and critical analysis of definitions related to core concepts; • Risk identification through qualitative approaches (preliminary hazard analysis, HAZOP, FMECA, etc.); • Modelling of industrial systems through static (fault tree, reliability block diagram), sequential (cause-consequence diagrams, event trees, LOPA, bowtie), and dynamic (Markov graphs, Petri nets) approaches; • Probabilistic calculations through state-of-the-art analytical or Monte Carlo simulation techniques; • Analysis, modelling, and calculations of common cause failure and uncertainties; • Linkages and combinations between the various modelling and calculation approaches; • Reliability data collection and standardization. The book features illustrations, explanations, examples, and exercises to help readers gain a detailed understanding of the topic and implement it into their own work. Further, it analyses the production availability of production systems and the functional safety of safety systems (SIL calculations), showcasing specific applications of the general theory discussed. Given its scope, this book is a valuable resource for engineers, software designers, standard developers, professors, and students.

Download or read book Reliability of Safety Critical Systems written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the theory and methodology for reliability assessments of safety-critical functions through examples from a wide range of applications Reliability of Safety-Critical Systems: Theory and Applications provides a comprehensive introduction to reliability assessments of safety-related systems based on electrical, electronic, and programmable electronic (E/E/PE) technology. With a focus on the design and development phases of safety-critical systems, the book presents theory and methods required to document compliance with IEC 61508 and the associated sector-specific standards. Combining theory and practical applications, Reliability of Safety-Critical Systems: Theory and Applications implements key safety-related strategies and methods to meet quantitative safety integrity requirements. In addition, the book details a variety of reliability analysis methods that are needed during all stages of a safety-critical system, beginning with specification and design and advancing to operations, maintenance, and modification control. The key categories of safety life-cycle phases are featured, including strategies for the allocation of reliability performance requirements; assessment methods in relation to design; and reliability quantification in relation to operation and maintenance. Issues and benefits that arise from complex modern technology developments are featured, as well as: Real-world examples from large industry facilities with major accident potential and products owned by the general public such as cars and tools Plentiful worked examples throughout that provide readers with a deeper understanding of the core concepts and aid in the analysis and solution of common issues when assessing all facets of safety-critical systems Approaches that work on a wide scope of applications and can be applied to the analysis of any safety-critical system A brief appendix of probability theory for reference With an emphasis on how safety-critical functions are introduced into systems and facilities to prevent or mitigate the impact of an accident, this book is an excellent guide for professionals, consultants, and operators of safety-critical systems who carry out practical, risk, and reliability assessments of safety-critical systems. Reliability of Safety-Critical Systems: Theory and Applications is also a useful textbook for courses in reliability assessment of safety-critical systems and reliability engineering at the graduate-level, as well as for consulting companies offering short courses in reliability assessment of safety-critical systems.

Download or read book Reliability Maintainability and Risk written by David J. Smith and published by Elsevier. This book was released on 2011-06-29 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability, Maintainability and Risk: Practical Methods for Engineers, Eighth Edition, discusses tools and techniques for reliable and safe engineering, and for optimizing maintenance strategies. It emphasizes the importance of using reliability techniques to identify and eliminate potential failures early in the design cycle. The focus is on techniques known as RAMS (reliability, availability, maintainability, and safety-integrity). The book is organized into five parts. Part 1 on reliability parameters and costs traces the history of reliability and safety technology and presents a cost-effective approach to quality, reliability, and safety. Part 2 deals with the interpretation of failure rates, while Part 3 focuses on the prediction of reliability and risk. Part 4 discusses design and assurance techniques; review and testing techniques; reliability growth modeling; field data collection and feedback; predicting and demonstrating repair times; quantified reliability maintenance; and systematic failures. Part 5 deals with legal, management and safety issues, such as project management, product liability, and safety legislation. 8th edition of this core reference for engineers who deal with the design or operation of any safety critical systems, processes or operations Answers the question: how can a defect that costs less than $1000 dollars to identify at the process design stage be prevented from escalating to a $100,000 field defect, or a $1m+ catastrophe Revised throughout, with new examples, and standards, including must have material on the new edition of global functional safety standard IEC 61508, which launches in 2010