Download or read book System level Modelling and Design Space Exploration for Multiprocessor Embedded System on chip Architectures written by Çağkan Erbaş and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book System level Modelling and Design Space Exploration for Multiprocessor Embedded System on chip Architectures written by Cagkan Erbas and published by Amsterdam University Press. This book was released on 2006 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern embedded systems come with contradictory design constraints. On one hand, these systems often target mass production and battery-based devices, and therefore should be cheap and power efficient. On the other hand, they still need to show high (sometimes real-time) performance, and often support multiple applications and standards which requires high programmability. This wide spectrum of design requirements leads to complex heterogeneous System-on-Chip (SoC) architectures -- consisting of several types of processors from fully programmable microprocessors to configurable processing cores and customized hardware components, integrated on a single chip. This study targets such multiprocessor embedded systems and strives to develop algorithms, methods, and tools to deal with a number of fundamental problems which are encountered by the system designers during the early design stages.
Download or read book Multiprocessor Systems on Chip written by Torsten Kempf and published by Springer Science & Business Media. This book was released on 2011-02-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the design challenges of MPSoC platforms, focusing on early design space exploration. It defines an iterative methodology to increase the abstraction level so that evaluation of design decisions can be performed earlier in the design process. These techniques enable exploration on the system level before undertaking time- and cost-intensive development.
Download or read book Multi objective Design Space Exploration of Multiprocessor SoC Architectures written by Cristina Silvano and published by Springer Science & Business Media. This book was released on 2011-08-23 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a reference for researchers and designers in Embedded Systems who need to explore design alternatives. It provides a design space exploration methodology for the analysis of system characteristics and the selection of the most appropriate architectural solution to satisfy requirements in terms of performance, power consumption, number of required resources, etc. Coverage focuses on the design of complex multimedia applications, where the choice of the optimal design alternative in terms of application/architecture pair is too complex to be pursued through a full search comparison, especially because of the multi-objective nature of the designer’s goal, the simulation time required and the number of parameters of the multi-core architecture to be optimized concurrently.
Download or read book Integrated System Level Modeling of Network on Chip enabled Multi Processor Platforms written by Tim Kogel and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated System-Level Modeling of Network-on-Chip Enabled Multi-Processor Platforms first gives a comprehensive update on recent developments in the area of SoC platforms and ESL design methodologies. The main contribution is the rigorous definition of a framework for modeling at the timing approximate level of abstraction. Subsequently this book presents a set of tools for the creation and exploration of timing approximate SoC platform models.
Download or read book Electronic System Level HW SW Co Design of Heterogeneous Multi Processor Embedded Systems written by Luigi Pomante and published by River Publishers. This book was released on 2016-06-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronic systems consist of a fairly heterogeneous set of components. Today, a single system can be constituted by a hardware platform, frequently composed of a mix of analog and digital components, and by several software application layers. The hardware can include several heterogeneous microprocessors (e.g. GPP, DSP, GPU, etc.), dedicated ICs (ASICs and/or FPGAs), memories, a set of local connections between the system components, and some interfaces between the system and the environment (sensors, actuators, etc.). Therefore, on the one hand, multi-processor embedded systems are capable of meeting the demand of processing power and flexibility of complex applications. On the other hand, such systems are very complex to design and optimize, so that the design methodology plays a major role in determining the success of the products. For these reasons, to cope with the increasing system complexity, the approaches typically used today are oriented towards co-design methodologies working at the higher levels of abstraction. Unfortunately, such methodologies are typically customized for the specific application, suffer of a lack of generality and still need a considerable effort when real-size project are envisioned. Therefore, there is still the need for a general methodology able to support the designer during the high-level steps of a co-design flow, enabling an effective design space exploration before tackling the low-level steps and thus committing to the final technology. This should prevent costly redesign loops. In such a context, the work described in this book, composed of two parts, aims at providing models, methodologies and tools to support each step of the co-design flow of embedded systems implemented by exploiting heterogeneous multi-processor architectures mapped on distributed systems, as well as fully integrated onto a single chip. The first part focuses on issues like the analysis of system specification languages, and the analysis of existing system-level HW/SW co-simulation methodologies to support heterogeneous multi-processor architectures. The second part focuses mainly on Design Space Exploration, and it presents both some theoretical advancements with respect to the first part, and the development of a prototypal framework that provides practical exploitation of the proposed concepts.
Download or read book Embedded Software Design and Programming of Multiprocessor System on Chip written by Katalin Popovici and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current multimedia and telecom applications require complex, heterogeneous multiprocessor system on chip (MPSoC) architectures with specific communication infrastructure in order to achieve the required performance. Heterogeneous MPSoC includes different types of processing units (DSP, microcontroller, ASIP) and different communication schemes (fast links, non standard memory organization and access). Programming an MPSoC requires the generation of efficient software running on MPSoC from a high level environment, by using the characteristics of the architecture. This task is known to be tedious and error prone, because it requires a combination of high level programming environments with low level software design. This book gives an overview of concepts related to embedded software design for MPSoC. It details a full software design approach, allowing systematic, high-level mapping of software applications on heterogeneous MPSoC. This approach is based on gradual refinement of hardware/software interfaces and simulation models allowing to validate the software at different abstraction levels. This book combines Simulink for high level programming and SystemC for the low level software development. This approach is illustrated with multiple examples of application software and MPSoC architectures that can be used for deep understanding of software design for MPSoC.
Download or read book Embedded Processor Design Challenges written by Ed F. Deprettere and published by Springer. This book was released on 2003-07-31 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended to give an introduction to and an overview of sta- of-the-art techniques in the design of complex embedded systems. The book title is SAMOS for two major reasons. First, it tries to focus on the actual distinct, yet important problem ?elds of System-Level design of embedded systems, including mapping techniques and synthesis,Architectural design,Modeling issues such as speci?cation languages, formal models, and- nallySimulation. The second reason is that the volume includes a number of papers presented at a workshop with the same name on the Island of Samos, Greece, in July 2001. In order to receive international attention, a number of reputed researchers were invited to this workshop to present their current work. Participation was by invitation only. For the volume presented here, a number of additional papers where selected based on a call for papers. All contributions were refereed. This volume presents a selection of 18 of the refereed papers, including 2 invited papers. The textbook is organized according to four topics: The ?rst isA)System- LevelDesignandSimulation.Inthissection,wepresentacollectionofpapers that give an overview of the challenging goal to design and explore alternatives of embedded system implementations at the system-level. One paper gives an overview of models and tools used in system-level design. The other papers present new models to describe applications, provide models for re?nement and design space exploration, and for tradeo? analysis between cost and ?exibility of an implementation.
Download or read book Processor and System on Chip Simulation written by Rainer Leupers and published by Springer Science & Business Media. This book was released on 2010-09-15 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation of computer architectures has made rapid progress recently. The primary application areas are hardware/software performance estimation and optimization as well as functional and timing verification. Recent, innovative technologies such as retargetable simulator generation, dynamic binary translation, or sampling simulation have enabled widespread use of processor and system-on-chip (SoC) simulation tools in the semiconductor and embedded system industries. Simultaneously, processor and SoC simulation is still a very active research area, e.g. what amounts to higher simulation speed, flexibility, and accuracy/speed trade-offs. This book presents and discusses the principle technologies and state-of-the-art in high-level hardware architecture simulation, both at the processor and the system-on-chip level.
Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Alex Orailoglu and published by Springer Nature. This book was released on 2022-04-26 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 21st International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation, SAMOS 2021, which took place in July 2021. Due to COVID-19 pandemic the conference was held virtually. The 17 full papers presented in this volume were carefully reviewed and selected from 45 submissions. The papers are organized in topics as follows: simulation and design space exploration; the 3Cs - Cache, Cluster and Cloud; heterogeneous SoC; novel CPU architectures and applications; dataflow; innovative architectures and tools for security; next generation computing; insights from negative results.
Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Cristina Silvano and published by Springer Nature. This book was released on 2023-12-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 22st International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation, SAMOS 2021, which took place in July 2022 in Samos, Greece. The 11 full papers and 7 short papers presented in this volume were carefully reviewed and selected from 45 submissions. The conference covers a wide range of embedded systems design aspects, including machine learning accelerators, and power management and programmable dataflow systems.
Download or read book Analysis Architectures and Modelling of Embedded Systems written by Achim Rettberg and published by Springer Science & Business Media. This book was released on 2009-09-04 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the technical program of the International Embedded Systems Symposium (IESS) 2009. Timely topics, techniques and trends in embedded system design are covered by the chapters in this volume, including modelling, simulation, verification, test, scheduling, platforms and processors. Particular emphasis is paid to automotive systems and wireless sensor networks. Sets of actual case studies in the area of embedded system design are also included. Over recent years, embedded systems have gained an enormous amount of proce- ing power and functionality and now enter numerous application areas, due to the fact that many of the formerly external components can now be integrated into a single System-on-Chip. This tendency has resulted in a dramatic reduction in the size and cost of embedded systems. As a unique technology, the design of embedded systems is an essential element of many innovations. Embedded systems meet their performance goals, including real-time constraints, through a combination of special-purpose hardware and software components tailored to the system requirements. Both the development of new features and the reuse of existing intellectual property components are essential to keeping up with ever more demanding customer requirements. Furthermore, design complexities are steadily growing with an increasing number of components that have to cooperate properly. Embedded system designers have to cope with multiple goals and constraints simul- neously, including timing, power, reliability, dependability, maintenance, packaging and, last but not least, price.
Download or read book Retargetable Processor System Integration into Multi Processor System on Chip Platforms written by Andreas Wieferink and published by Springer Science & Business Media. This book was released on 2008-07-08 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a methodology and the associated tooling for enabling design space exploration as well as a successive refinement flow for the design of optimized MP-SoCs with a high degree of automation.
Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Stamatis Vassiliadis and published by Springer. This book was released on 2007-08-30 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers and professionals in the appropriate subject areas will find this book an essential update on where research has got to in what is, after all, a hugely important area. It constitutes the refereed proceedings of the 7th International Workshop on Systems, Architectures, Modeling, and Simulation, held in Samos, Greece, in July 2007. The 44 revised full papers presented together with 2 keynote talks were thoroughly reviewed and selected from 116 submissions
Download or read book Design Space Exploration and Resource Management of Multi Many Core Systems written by Amit Kumar Singh and published by MDPI. This book was released on 2021-05-10 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends.
Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Mladen Berekovic and published by Springer. This book was released on 2008-07-18 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th International Workshop on Systems, Architectures, Modeling, and Simulation, SAMOS 2008, held in Samos, Greece, in July 2008. The 24 revised full papers presented together with a contamplative keynote and additional papers of two special workshop sessions were carefully reviewed and selected from 62 submissions. The papers are organized in topical sections on architecture, new frontiers, SoC, application specific contributions, system level design for heterogeneous systems, programming multicores, sensors and sensor networks; and systems modeling and design.
Download or read book Scalable Multi core Architectures written by Dimitrios Soudris and published by Springer Science & Business Media. This book was released on 2011-10-17 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Moore’s law continues to unfold, two important trends have recently emerged. First, the growth of chip capacity is translated into a corresponding increase of number of cores. Second, the parallelization of the computation and 3D integration technologies lead to distributed memory architectures. This book describes recent research that addresses urgent challenges in many-core architectures and application mapping. It addresses the architectural design of many core chips, memory and data management, power management, design and programming methodologies. It also describes how new techniques have been applied in various industrial case studies.