Download or read book System Level Design Techniques for Energy Efficient Embedded Systems written by Marcus T. Schmitz and published by Springer. This book was released on 2006-01-16 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-Level Design Techniques for Energy-Efficient Embedded Systems addresses the development and validation of co-synthesis techniques that allow an effective design of embedded systems with low energy dissipation. The book provides an overview of a system-level co-design flow, illustrating through examples how system performance is influenced at various steps of the flow including allocation, mapping, and scheduling. The book places special emphasis upon system-level co-synthesis techniques for architectures that contain voltage scalable processors, which can dynamically trade off between computational performance and power consumption. Throughout the book, the introduced co-synthesis techniques, which target both single-mode systems and emerging multi-mode applications, are applied to numerous benchmarks and real-life examples including a realistic smart phone.

Download or read book System Level Design Techniques for Energy Efficient Embedded Systems written by Marcus T. Schmitz and published by Springer Science & Business Media. This book was released on 2004 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: "System-Level Design Techniques for Energy-Efficient Embedded Systems will be of interest to advanced undergraduates, graduate students, and designers."--BOOK JACKET.

Download or read book Energy Efficient Fault Tolerant Systems written by Jimson Mathew and published by Springer Science & Business Media. This book was released on 2013-09-07 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the-art in energy efficient, fault-tolerant embedded systems. It covers the entire product lifecycle of electronic systems design, analysis and testing and includes discussion of both circuit and system-level approaches. Readers will be enabled to meet the conflicting design objectives of energy efficiency and fault-tolerance for reliability, given the up-to-date techniques presented.

Download or read book System Level Design of GPU Based Embedded Systems written by Arian Maghazeh and published by Linköping University Electronic Press. This book was released on 2018-12-07 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern embedded systems deploy several hardware accelerators, in a heterogeneous manner, to deliver high-performance computing. Among such devices, graphics processing units (GPUs) have earned a prominent position by virtue of their immense computing power. However, a system design that relies on sheer throughput of GPUs is often incapable of satisfying the strict power- and time-related constraints faced by the embedded systems. This thesis presents several system-level software techniques to optimize the design of GPU-based embedded systems under various graphics and non-graphics applications. As compared to the conventional application-level optimizations, the system-wide view of our proposed techniques brings about several advantages: First, it allows for fully incorporating the limitations and requirements of the various system parts in the design process. Second, it can unveil optimization opportunities through exposing the information flow between the processing components. Third, the techniques are generally applicable to a wide range of applications with similar characteristics. In addition, multiple system-level techniques can be combined together or with application-level techniques to further improve the performance. We begin by studying some of the unique attributes of GPU-based embedded systems and discussing several factors that distinguish the design of these systems from that of the conventional high-end GPU-based systems. We then proceed to develop two techniques that address an important challenge in the design of GPU-based embedded systems from different perspectives. The challenge arises from the fact that GPUs require a large amount of workload to be present at runtime in order to deliver a high throughput. However, for some embedded applications, collecting large batches of input data requires an unacceptable waiting time, prompting a trade-off between throughput and latency. We also develop an optimization technique for GPU-based applications to address the memory bottleneck issue by utilizing the GPU L2 cache to shorten data access time. Moreover, in the area of graphics applications, and in particular with a focus on mobile games, we propose a power management scheme to reduce the GPU power consumption by dynamically adjusting the display resolution, while considering the user's visual perception at various resolutions. We also discuss the collective impact of the proposed techniques in tackling the design challenges of emerging complex systems. The proposed techniques are assessed by real-life experimentations on GPU-based hardware platforms, which demonstrate the superior performance of our approaches as compared to the state-of-the-art techniques.

Download or read book Sustainable ICTs and Management Systems for Green Computing written by Hu, Wen-Chen and published by IGI Global. This book was released on 2012-06-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book focuses on information technology using sustainable green computing to reduce energy and resources used"--Provided by publisher.

Download or read book Design Principles for Embedded Systems written by KCS Murti and published by Springer Nature. This book was released on 2021-09-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to serve as a textbook for courses offered to graduate and undergraduate students enrolled in electronics and electrical engineering and computer science. This book attempts to bridge the gap between electronics and computer science students, providing complementary knowledge that is essential for designing an embedded system. The book covers key concepts tailored for embedded system design in one place. The topics covered in this book are models and architectures, Executable Specific Languages – SystemC, Unified Modeling Language, real-time systems, real-time operating systems, networked embedded systems, Embedded Processor architectures, and platforms that are secured and energy-efficient. A major segment of embedded systems needs hard real-time requirements. This textbook includes real-time concepts including algorithms and real-time operating system standards like POSIX threads. Embedded systems are mostly distributed and networked for deterministic responses. The book covers how to design networked embedded systems with appropriate protocols for real-time requirements. Each chapter contains 2-3 solved case studies and 10 real-world problems as exercises to provide detailed coverage and essential pedagogical tools that make this an ideal textbook for students enrolled in electrical and electronics engineering and computer science programs.

Download or read book Designing Embedded Processors written by Jörg Henkel and published by Springer Science & Business Media. This book was released on 2007-07-27 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: To the hard-pressed systems designer this book will come as a godsend. It is a hands-on guide to the many ways in which processor-based systems are designed to allow low power devices. Covering a huge range of topics, and co-authored by some of the field’s top practitioners, the book provides a good starting point for engineers in the area, and to research students embarking upon work on embedded systems and architectures.

Download or read book Advances in Parallel Distributed Computing written by Dhinaharan Nagamalai and published by Springer. This book was released on 2011-10-12 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Advances in Parallel, Distributed Computing Technologies and Applications, PDCTA 2011, held in Tirunelveli, India, in September 2011. The 64 revised full papers were carefully reviewed and selected from over 400 submissions. Providing an excellent international forum for sharing knowledge and results in theory, methodology and applications of parallel, distributed computing the papers address all current issues in this field with special focus on algorithms and applications, computer networks, cyber trust and security, wireless networks, as well as mobile computing and bioinformatics.

Download or read book Energy Efficient Wireless Sensor Networks written by Vidushi Sharma and published by CRC Press. This book was released on 2017-07-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advances in low-power electronic devices integrated with wireless communication capabilities are one of recent areas of research in the field of Wireless Sensor Networks (WSNs). One of the major challenges in WSNs is uniform and least energy dissipation while increasing the lifetime of the network. This is the first book that introduces the energy efficient wireless sensor network techniques and protocols. The text covers the theoretical as well as the practical requirements to conduct and trigger new experiments and project ideas. The advanced techniques will help in industrial problem solving for energy-hungry wireless sensor network applications.

Download or read book Embedded Systems Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2005-08-16 with total page 1161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are nearly ubiquitous, and books on individual topics or components of embedded systems are equally abundant. Unfortunately, for those designers who thirst for knowledge of the big picture of embedded systems there is not a drop to drink. Until now. The Embedded Systems Handbook is an oasis of information, offering a mix of basic a

Download or read book Embedded Systems Handbook 2 Volume Set written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-08 with total page 1503 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years there has been an dramatic upsurge in research and development, implementations of new technologies, and deployments of actual solutions and technologies in the diverse application areas of embedded systems. These areas include automotive electronics, industrial automated systems, and building automation and control. Comprising 48 chapters and the contributions of 74 leading experts from industry and academia, the Embedded Systems Handbook, Second Edition presents a comprehensive view of embedded systems: their design, verification, networking, and applications. The contributors, directly involved in the creation and evolution of the ideas and technologies presented, offer tutorials, research surveys, and technology overviews, exploring new developments, deployments, and trends. To accommodate the tremendous growth in the field, the handbook is now divided into two volumes. New in This Edition: Processors for embedded systems Processor-centric architecture description languages Networked embedded systems in the automotive and industrial automation fields Wireless embedded systems Embedded Systems Design and Verification Volume I of the handbook is divided into three sections. It begins with a brief introduction to embedded systems design and verification. The book then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Networked Embedded Systems Volume II focuses on selected application areas of networked embedded systems. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems.

Download or read book Energy Efficient Hardware Software Co Synthesis Using Reconfigurable Hardware written by Jingzhao Ou and published by CRC Press. This book was released on 2009-10-14 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid energy estimation for energy efficient applications using field-programmable gate arrays (FPGAs) remains a challenging research topic. Energy dissipation and efficiency have prevented the widespread use of FPGA devices in embedded systems, where energy efficiency is a key performance metric. Helping overcome these challenges, Energy Efficient

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Design and Test Technology for Dependable Systems on chip written by Raimund Ubar and published by IGI Global. This book was released on 2011-01-01 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book covers aspects of system design and efficient modelling, and also introduces various fault models and fault mechanisms associated with digital circuits integrated into System on Chip (SoC), Multi-Processor System-on Chip (MPSoC) or Network on Chip (NoC)"--

Download or read book Energy Aware Memory Management for Embedded Multimedia Systems written by Florin Balasa and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy-Aware Memory Management for Embedded Multimedia Systems: A Computer-Aided Design Approach presents recent computer-aided design (CAD) ideas that address memory management tasks, particularly the optimization of energy consumption in the memory subsystem. It explains how to efficiently implement CAD solutions, including theoretical methods and novel algorithms. The book covers various energy-aware design techniques, including data-dependence analysis techniques, memory size estimation methods, extensions of mapping approaches, and memory banking approaches. It shows how these techniques are used to evaluate the data storage of an application, reduce dynamic and static energy consumption, design energy-efficient address generation units, and much more. Providing an algebraic framework for memory management tasks, this book illustrates how to optimize energy consumption in memory subsystems using CAD solutions. The algorithmic style of the text should help electronic design automation (EDA) researchers and tool developers create prototype software tools for system-level exploration, with the goal to ultimately obtain an optimized architectural solution of the memory subsystem.

Download or read book Ambient Intelligence written by Werner Weber and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ambient intelligence is the vision of a technology that will become invisibly embedded in our natural surroundings, present whenever we need it, enabled by simple and effortless interactions, attuned to all our senses, adaptive to users and context-sensitive, and autonomous. High-quality information access and personalized content must be available to everybody, anywhere, and at any time. This book addresses ambient intelligence used to support human contacts and accompany an individual's path through the complicated modern world. From the technical standpoint, distributed electronic intelligence is addressed as hardware vanishing into the background. Devices used for ambient intelligence are small, low-power, low weight, and (very importantly) low-cost; they collaborate or interact with each other; and they are redundant and error-tolerant. This means that the failure of one device will not cause failure of the whole system. Since wired connections often do not exist, radio methods will play an important role for data transfer. This book addresses various aspects of ambient intelligence, from applications that are imminent since they use essentially existing technologies, to ambitious ideas whose realization is still far away, due to major unsolved technical challenges.

Download or read book Dynamic Power Management written by Luca Benini and published by Springer Science & Business Media. This book was released on 1997-11-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic power management is a design methodology aiming at controlling performance and power levels of digital circuits and systems, with the goal of extending the autonomous operation time of battery-powered systems, providing graceful performance degradation when supply energy is limited, and adapting power dissipation to satisfy environmental constraints. Dynamic Power Management: Design Techniques and CAD Tools addresses design techniques and computer-aided design solutions for power management. Different approaches are presented and organized in an order related to their applicability to control-units, macro-blocks, digital circuits and electronic systems, respectively. All approaches are based on the principle of exploiting idleness of circuits, systems, or portions thereof. They involve both the detection of idleness conditions and the freezing of power-consuming activities in the idle components. The book also describes some approaches to system-level power management, including Microsoft's OnNow architecture and the `Advanced Configuration and Power Management' standard proposed by Intel, Microsoft and Toshiba. These approaches migrate power management to the software layer running on hardware platforms, thus providing a flexible and self-configurable solution to adapting the power/performance tradeoff to the needs of mobile (and fixed) computing and communication. Dynamic Power Management: Design Techniques and CAD Tools is of interest to researchers and developers of computer-aided design tools for integrated circuits and systems, as well as to system designers.