Download or read book System Design with Memristor Technologies written by Lauren Guckert and published by . This book was released on 2018 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Memristors are a new class of circuit element with the ability to change their resistance value while retaining memory of their current and past resistances. Their small form factor, high density, and fast switching times have sparked research into their applications in modern memory hierarchies. However, these new components pose system design challenges, as well as opportunities. System Design with Memristor Technologies explores design solutions for memristors, covering research and development trends in memristor technology, fabrication, modelling, and applications, and the design and implementation of arithmetic units using memristors. The book begins with an introduction to the principles of system design with memristors, then goes on to address memristor logic gates, arithmetic units for adders, multipliers and dividers, and improved and optimised adder, multiplier and divider designs. The final chapters draw conclusions from the topics covered and explore potential future trends in research into system designs with memristor technologies. This book is essential reading for research scientists and electronics engineers interested in the use of memristors in future system architectures, specifically focused on the areas of arithmetic units, non-Von-Neumann architectures, and logic-in-memory
Download or read book Memristor Technology Synthesis and Modeling for Sensing and Security Applications written by Heba Abunahla and published by Springer. This book was released on 2017-09-18 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a single-source guide to fabricate, characterize and model memristor devices for sensing applications. The authors describe a correlated, physics-based model to simulate and predict the behavior of devices fabricated with different oxide materials, active layer thickness, and operating temperature. They discuss memristors from various perspectives, including working mechanisms, different synthesis methods, characterization procedures, and device employment in radiation sensing and security applications.
Download or read book Nanoscale Memristor Device and Circuits Design written by Balwinder Raj and published by Elsevier. This book was released on 2023-11-20 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Memristor Device and Circuits Design provides theoretical frameworks, including (i) the background of memristors, (ii) physics of memristor and their modeling, (iii) menristive device applications, and (iv) circuit design for security and authentication. The book focuses on a broad aspect of realization of these applications as low cost and reliable devices. This is an important reference that will help materials scientists and engineers understand the production and applications of nanoscale memrister devices. A memristor is a two-terminal memory nanoscale device that stores information in terms of high/low resistance. It can retain information even when the power source is removed, i.e., "non-volatile." In contrast to MOS Transistors (MOST), which are the building blocks of all modern mobile and computing devices, memristors are relatively immune to radiation, as well as parasitic effects, such as capacitance, and can be much more reliable. This is extremely attractive for critical safety applications, such as nuclear and aerospace, where radiation can cause failure in MOST-based systems. Outlines the major principles of circuit design for nanoelectronic applications Explores major applications, including memristor-based memories, sensors, solar cells, or memristor-based hardware and software security applications Assesses the major challenges to manufacturing nanoscale memristor devices at an industrial scale
Download or read book Implications of Memristor Technologies for Future Computing Systems written by Dietmar Fey and published by . This book was released on 2019 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Memristor Based Nanoelectronic Computing Circuits and Architectures written by Ioannis Vourkas and published by Springer. This book was released on 2015-08-26 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the design and development of nanoelectronic computing circuits, systems and architectures focusing particularly on memristors, which represent one of today’s latest technology breakthroughs in nanoelectronics. The book studies, explores, and addresses the related challenges and proposes solutions for the smooth transition from conventional circuit technologies to emerging computing memristive nanotechnologies. Its content spans from fundamental device modeling to emerging storage system architectures and novel circuit design methodologies, targeting advanced non-conventional analog/digital massively parallel computational structures. Several new results on memristor modeling, memristive interconnections, logic circuit design, memory circuit architectures, computer arithmetic systems, simulation software tools, and applications of memristors in computing are presented. High-density memristive data storage combined with memristive circuit-design paradigms and computational tools applied to solve NP-hard artificial intelligence problems, as well as memristive arithmetic-logic units, certainly pave the way for a very promising memristive era in future electronic systems. Furthermore, these graph-based NP-hard problems are solved on memristive networks, and coupled with Cellular Automata (CA)-inspired computational schemes that enable computation within memory. All chapters are written in an accessible manner and are lavishly illustrated. The book constitutes an informative cornerstone for young scientists and a comprehensive reference to the experienced reader, hoping to stimulate further research on memristive devices, circuits, and systems.
Download or read book Memristor Computing Systems written by Leon O. Chua and published by Springer Nature. This book was released on 2022-06-23 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume offers practical solutions and design-, modeling-, and implementation-related insights that address current research problems in memristors, memristive devices, and memristor computing. The book studies and addresses related challenges in and proposes solutions for the future of memristor computing. State-of-the-art research on memristor modeling, memristive interconnections, memory circuit architectures, software simulation tools, and applications of memristors in computing are presented. Utilising contributions from numerous experts in the field, written in clear language and illustrated throughout, this book is a comprehensive reference work. Memristor Computing Systems explains memristors and memristive devices in an accessible way for graduate students and researchers with a basic knowledge of electrical and control systems engineering, as well as prompting further research for more experienced academics.
Download or read book Advances in Memristors Memristive Devices and Systems written by Sundarapandian Vaidyanathan and published by Springer. This book was released on 2017-02-15 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest advances in and applications of memristors, memristive devices and systems. It gathers 20 contributed chapters by subject experts, including pioneers in the field such as Leon Chua (UC Berkeley, USA) and R.S. Williams (HP Labs, USA), who are specialized in the various topics addressed in this book, and covers broad areas of memristors and memristive devices such as: memristor emulators, oscillators, chaotic and hyperchaotic memristive systems, control of memristive systems, memristor-based min-max circuits, canonic memristors, memristive-based neuromorphic applications, implementation of memristor-based chaotic oscillators, inverse memristors, linear memristor devices, delayed memristive systems, flux-controlled memristive emulators, etc. Throughout the book, special emphasis is given to papers offering practical solutions and design, modeling, and implementation insights to address current research problems in memristors, memristive devices and systems. As such, it offers a valuable reference book on memristors and memristive devices for graduate students and researchers with a basic knowledge of electrical and control systems engineering.
Download or read book Languages Design Methods and Tools for Electronic System Design written by Marie-Minerve Louërat and published by Springer. This book was released on 2014-08-21 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a selection of the best papers from the sixteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2013 in Paris, France. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems and mixed-technology systems.
Download or read book Silicon Compatible Materials Processes and Technologies for Advanced Integrated Circuits and Emerging Applications 8 written by F. Roozeboom and published by The Electrochemical Society. This book was released on 2018-05-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic VLSI Design Technology written by Cherry Bhargava and published by CRC Press. This book was released on 2022-09-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current cutting-edge VLSI circuit design technologies provide end-users with many applications, increased processing power and improved cost effectiveness. This trend is accelerating, with significant implications on future VLSI and systems design. VLSI design engineers are always in demand for front-end and back-end design applications.The book aims to give future and current VSLI design engineers a robust understanding of the underlying principles of the subject. It not only focuses on circuit design processes obeying VLSI rules but also on technological aspects of fabrication. The Hardware Description Language (HDL) Verilog is explained along with its modelling style. The book also covers CMOS design from the digital systems level to the circuit level. The book clearly explains fundamental principles and is a guide to good design practices.The book is intended as a reference book for senior undergraduate, first-year post graduate students, researchers as well as academicians in VLSI design, electronics & electrical engineering and materials science. The basics and applications of VLSI design from digital system design to IC fabrication and FPGA Prototyping are each covered in a comprehensive manner. At the end of each unit is a section with technical questions including solutions which will serve as an excellent teaching aid to all readers.Technical topics discussed in the book include: • Digital System Design• Design flow for IC fabrication and FPGA based prototyping • Verilog HDL• IC Fabrication Technology• CMOS VLSI Design• Miscellaneous (It covers basics of Electronics, and Reconfigurable computing, PLDs, Latest technology etc.).
Download or read book Mem elements for Neuromorphic Circuits with Artificial Intelligence Applications written by Christos Volos and published by Academic Press. This book was released on 2021-06-17 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mem-elements for Neuromorphic Circuits with Artificial Intelligence Applications illustrates recent advances in the field of mem-elements (memristor, memcapacitor, meminductor) and their applications in nonlinear dynamical systems, computer science, analog and digital systems, and in neuromorphic circuits and artificial intelligence. The book is mainly devoted to recent results, critical aspects and perspectives of ongoing research on relevant topics, all involving networks of mem-elements devices in diverse applications. Sections contribute to the discussion of memristive materials and transport mechanisms, presenting various types of physical structures that can be fabricated to realize mem-elements in integrated circuits and device modeling. As the last decade has seen an increasing interest in recent advances in mem-elements and their applications in neuromorphic circuits and artificial intelligence, this book will attract researchers in various fields. Covers a broad range of interdisciplinary topics between mathematics, circuits, realizations, and practical applications related to nonlinear dynamical systems, nanotechnology, analog and digital systems, computer science and artificial intelligence Presents recent advances in the field of mem-elements (memristor, memcapacitor, meminductor) Includes interesting applications of mem-elements in nonlinear dynamical systems, analog and digital systems, neuromorphic circuits, computer science and artificial intelligence
Download or read book Information Systems Design and Intelligent Applications written by Suresh Chandra Satapathy and published by Springer. This book was released on 2016-02-03 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third international conference on INformation Systems Design and Intelligent Applications (INDIA – 2016) held in Visakhapatnam, India during January 8-9, 2016. The book covers all aspects of information system design, computer science and technology, general sciences, and educational research. Upon a double blind review process, a number of high quality papers are selected and collected in the book, which is composed of three different volumes, and covers a variety of topics, including natural language processing, artificial intelligence, security and privacy, communications, wireless and sensor networks, microelectronics, circuit and systems, machine learning, soft computing, mobile computing and applications, cloud computing, software engineering, graphics and image processing, rural engineering, e-commerce, e-governance, business computing, molecular computing, nano-computing, chemical computing, intelligent computing for GIS and remote sensing, bio-informatics and bio-computing. These fields are not only limited to computer researchers but also include mathematics, chemistry, biology, bio-chemistry, engineering, statistics, and all others in which computer techniques may assist.
Download or read book Embedded Memory Design for Multi Core and Systems on Chip written by Baker Mohammad and published by Springer Science & Business Media. This book was released on 2013-10-22 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the various tradeoffs systems designers face when designing embedded memory. Readers designing multi-core systems and systems on chip will benefit from the discussion of different topics from memory architecture, array organization, circuit design techniques and design for test. The presentation enables a multi-disciplinary approach to chip design, which bridges the gap between the architecture level and circuit level, in order to address yield, reliability and power-related issues for embedded memory.
Download or read book Advances in Neuromorphic Memristor Science and Applications written by Robert Kozma and published by Springer Science & Business Media. This book was released on 2012-06-28 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical implementation of the memristor at industrial scale sparked the interest from various disciplines, ranging from physics, nanotechnology, electrical engineering, neuroscience, to intelligent robotics. As any promising new technology, it has raised hopes and questions; it is an extremely challenging task to live up to the high expectations and to devise revolutionary and feasible future applications for memristive devices. The possibility of gathering prominent scientists in the heart of the Silicon Valley given by the 2011 International Joint Conference on Neural Networks held in San Jose, CA, has offered us the unique opportunity of organizing a series of special events on the present status and future perspectives in neuromorphic memristor science. This book presents a selection of the remarkable contributions given by the leaders of the field and it may serve as inspiration and future reference to all researchers that want to explore the extraordinary possibilities given by this revolutionary concept.
Download or read book New Technologies Development and Application V written by Isak Karabegović and published by Springer Nature. This book was released on 2022-05-25 with total page 1151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features papers focusing on the implementation of new and future technologies, which were presented at the International Conference on New Technologies, Development and Application, held at the Academy of Science and Arts of Bosnia and Herzegovina in Sarajevo on 23rd–25th June 2022. It covers a wide range of future technologies and technical disciplines, including complex systems such as industry 4.0; patents in industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control, energy, renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; intelligent transport, effectiveness and logistics systems, smart grids, nonlinear systems, power, social and economic systems, education, IoT. The book New Technologies, Development and Application V is oriented towards Fourth Industrial Revolution “Industry 4.0”, in which implementation will improve many aspects of human life in all segments and lead to changes in business paradigms and production models. Further, new business methods are emerging, transforming production systems, transport, delivery and consumption, which need to be monitored and implemented by every company involved in the global market.
Download or read book Formal Methods for Industrial Critical Systems written by Falk Howar and published by Springer. This book was released on 2018-08-29 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 23rd International Conference on Formal Methods for Industrial Critical Systems, FMICS 2018, held in Maynooth, Ireland, in September 2018. The 9 regular papers presented in this volume were carefully reviewed and selected from 17 submissions. The book also contains two invited talks in full-paper length. In addition, there are 8 invited contributions in honor of Susanne Graf (Director of Research at VERIMAG Grenoble, France) on the occasion of her 60th birthday. The aim of the FMICS conference series is to provide a forum for researchers who are interested in the development and application of formal methods in industry. In particular, FMICS brings together scientists and engineers who are active in the area of formal methods and interested in exchanging their experiences in the industrial usage of these methods. The FMICS conference series also strives to promote research and development for the improvement of formal methods and tools for industrial applications.
Download or read book Advanced Computing in Industrial Mathematics written by Krassimir Georgiev and published by Springer. This book was released on 2018-09-27 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed proceedings of the 12th Annual Meeting of the Bulgarian Section of the Society for Industrial and Applied Mathematics, BGSIAM’17, held in Sofia, Bulgaria, in December 2017. The general theme of BGSIAM’17 was industrial and applied mathematics, with a particular focus on: high-performance computing, numerical methods and algorithms, analysis of partial differential equations and their applications, mathematical biology, control and uncertain systems, stochastic models, molecular dynamics, neural networks, genetic algorithms, metaheuristics for optimization problems, generalized nets, and Big Data.