Download or read book Optical Design for Biomedical Imaging written by Rongguang Liang and published by SPIE-International Society for Optical Engineering. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing an efficient imaging system for biomedical optics requires a solid understanding of the special requirements of the optical systems for biomedical imaging and the optical components used in the systems. However, a lack of reference books on optical design (imaging and illumination) for biomedical imaging has led to some inefficient systems. This book fills the gap between biomedical optics and optical design by addressing the fundamentals of biomedical optics and optical engineering, and biomedical imaging systems. The first half provides a brief introduction to biomedical optics and then covers the fundamentals of optics, optical components, light sources, detectors, optical imaging system design, and illumination system design. This also includes important issues related to biomedical imaging, such as autofluorescence from optical materials. The second half of the text covers various biomedical imaging techniques and their optical systems, along with design examples.
Download or read book Fourier Ptychographic Imaging written by Guoan Zheng and published by Morgan & Claypool Publishers. This book was released on 2016-06-30 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates the concept of Fourier ptychography, a new imaging technique that bypasses the resolution limit of the employed optics. In particular, it transforms the general challenge of high-throughput, high-resolution imaging from one that is coupled to the physical limitations of the optics to one that is solvable through computation. Demonstrated in a tutorial form and providing many MATLAB® simulation examples for the reader, it also discusses the experimental implementation and recent developments of Fourier ptychography. This book will be of interest to researchers and engineers learning simulation techniques for Fourier optics and the Fourier ptychography concept.
Download or read book Biomedical Optical Imaging written by James G. Fujimoto and published by Oxford University Press. This book was released on 2009-04-22 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical optical imaging is a rapidly emerging research area with widespread fundamental research and clinical applications. This book gives an overview of biomedical optical imaging with contributions from leading international research groups who have pioneered many of these techniques and applications. A unique research field spanning the microscopic to the macroscopic, biomedical optical imaging allows both structural and functional imaging. Techniques such as confocal and multiphoton microscopy provide cellular level resolution imaging in biological systems. The integration of this technology with exogenous chromophores can selectively enhance contrast for molecular targets as well as supply functional information on processes such as nerve transduction. Novel techniques integrate microscopy with state-of-the-art optics technology, and these include spectral imaging, two photon fluorescence correlation, nonlinear nanoscopy; optical coherence tomography techniques allow functional, dynamic, nanoscale, and cross-sectional visualization. Moving to the macroscopic scale, spectroscopic assessment and imaging methods such as fluorescence and light scattering can provide diagnostics of tissue pathology including neoplastic changes. Techniques using light diffusion and photon migration are a means to explore processes which occur deep inside biological tissues and organs. The integration of these techniques with exogenous probes enables molecular specific sensitivity.
Download or read book Research Awards Index written by and published by . This book was released on 1989 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modelling Optimization Analytic and Numerical Solutions written by Pammy Manchanda and published by Springer Nature. This book was released on 2020-02-04 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses a variety of topics related to industrial and applied mathematics, focusing on wavelet theory, sampling theorems, inverse problems and their applications, partial differential equations as a model of real-world problems, computational linguistics, mathematical models and methods for meteorology, earth systems, environmental and medical science, and the oil industry. It features papers presented at the International Conference in Conjunction with 14th Biennial Conference of ISIAM, held at Guru Nanak Dev University, Amritsar, India, on 2–4 February 2018. The conference has emerged as an influential forum, bringing together prominent academic scientists, experts from industry, and researchers. The topics discussed include Schrodinger operators, quantum kinetic equations and their application, extensions of fractional integral transforms, electrical impedance tomography, diffuse optical tomography, Galerkin method by using wavelets, a Cauchy problem associated with Korteweg–de Vries equation, and entropy solution for scalar conservation laws. This book motivates and inspires young researchers in the fields of industrial and applied mathematics.
Download or read book Comprehensive Biomedical Physics written by and published by Newnes. This book was released on 2014-07-25 with total page 4052 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomedical Physics, Ten Volume Set is a new reference work that provides the first point of entry to the literature for all scientists interested in biomedical physics. It is of particularly use for graduate and postgraduate students in the areas of medical biophysics. This Work is indispensable to all serious readers in this interdisciplinary area where physics is applied in medicine and biology. Written by leading scientists who have evaluated and summarized the most important methods, principles, technologies and data within the field, Comprehensive Biomedical Physics is a vital addition to the reference libraries of those working within the areas of medical imaging, radiation sources, detectors, biology, safety and therapy, physiology, and pharmacology as well as in the treatment of different clinical conditions and bioinformatics. This Work will be valuable to students working in all aspect of medical biophysics, including medical imaging and biomedical radiation science and therapy, physiology, pharmacology and treatment of clinical conditions and bioinformatics. The most comprehensive work on biomedical physics ever published Covers one of the fastest growing areas in the physical sciences, including interdisciplinary areas ranging from advanced nuclear physics and quantum mechanics through mathematics to molecular biology and medicine Contains 1800 illustrations, all in full color
Download or read book Handbook of Biomedical Optics written by David A. Boas and published by CRC Press. This book was released on 2016-04-19 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical optics holds tremendous promise to deliver effective, safe, non- or minimally invasive diagnostics and targeted, customizable therapeutics. Handbook of Biomedical Optics provides an in-depth treatment of the field, including coverage of applications for biomedical research, diagnosis, and therapy. It introduces the theory and fundamental
Download or read book High Resolution Imaging in Microscopy and Ophthalmology written by Josef F. Bille and published by Springer. This book was released on 2019-08-13 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a comprehensive overview of the application of the newest laser and microscope/ophthalmoscope technology in the field of high resolution imaging in microscopy and ophthalmology. Starting by describing High-Resolution 3D Light Microscopy with STED and RESOLFT, the book goes on to cover retinal and anterior segment imaging and image-guided treatment and also discusses the development of adaptive optics in vision science and ophthalmology. Using an interdisciplinary approach, the reader will learn about the latest developments and most up to date technology in the field and how these translate to a medical setting. High Resolution Imaging in Microscopy and Ophthalmology – New Frontiers in Biomedical Optics has been written by leading experts in the field and offers insights on engineering, biology, and medicine, thus being a valuable addition for scientists, engineers, and clinicians with technical and medical interest who would like to understand the equipment, the applications and the medical/biological background. Lastly, this book is dedicated to the memory of Dr. Gerhard Zinser, co-founder of Heidelberg Engineering GmbH, a scientist, a husband, a brother, a colleague, and a friend.
Download or read book Optimization Techniques in Computer Vision written by Mongi A. Abidi and published by Springer. This book was released on 2016-12-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents practical optimization techniques used in image processing and computer vision problems. Ill-posed problems are introduced and used as examples to show how each type of problem is related to typical image processing and computer vision problems. Unconstrained optimization gives the best solution based on numerical minimization of a single, scalar-valued objective function or cost function. Unconstrained optimization problems have been intensively studied, and many algorithms and tools have been developed to solve them. Most practical optimization problems, however, arise with a set of constraints. Typical examples of constraints include: (i) pre-specified pixel intensity range, (ii) smoothness or correlation with neighboring information, (iii) existence on a certain contour of lines or curves, and (iv) given statistical or spectral characteristics of the solution. Regularized optimization is a special method used to solve a class of constrained optimization problems. The term regularization refers to the transformation of an objective function with constraints into a different objective function, automatically reflecting constraints in the unconstrained minimization process. Because of its simplicity and efficiency, regularized optimization has many application areas, such as image restoration, image reconstruction, optical flow estimation, etc. Optimization plays a major role in a wide variety of theories for image processing and computer vision. Various optimization techniques are used at different levels for these problems, and this volume summarizes and explains these techniques as applied to image processing and computer vision.
Download or read book Integrated Optomechanical Analysis written by Keith B. Doyle and published by SPIE Press. This book was released on 2002 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial presents optomechanical modeling techniques to effectively design and analyze high-performance optical systems. It discusses thermal and structural modeling methods that use finite-element analysis to predict the integrity and performance of optical elements and optical support structures. Includes accompanying CD-ROM with examples.
Download or read book Resolution Enhancement Techniques in Optical Lithography written by Alfred Kwok-Kit Wong and published by SPIE Press. This book was released on 2001 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever-smaller IC devices are pushing the optical lithography envelope, increasing the importance of resolution enhancement techniques. This tutorial encompasses two decades of research. It discusses theoretical and practical aspects of commonly used techniques, including optical imaging and resolution, modified illumination, optical proximity correction, alternating and attenuating phase-shifting masks, selecting RETs, and second-generation RETs. Useful for students and practicing lithographers
Download or read book Sensors Signal and Image Processing in Biomedicine and Assisted Living written by Dimitris K. Iakovidis and published by MDPI. This book was released on 2020-11-04 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of recent advances on sensors, systems, and signal/image processing methods for biomedicine and assisted living. It includes methods for heart, sleep, and vital sign measurement; human motion-related signal analysis; assistive systems; and image- and video-based diagnostic systems. It provides an overview of the state-of-the-art challenges in the respective topics and future directions. This will be useful for researchers in various domains, including computer science, electrical engineering, biomedicine, and healthcare researchers.
Download or read book Peterson s Graduate Programs in Engineering Applied Sciences Aerospace Aeronautical Engineering Agricultural Engineering Bioengineering and Architectural Engineering 2011 written by Peterson's and published by Peterson's. This book was released on 2011-05-01 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Peterson's Graduate Programs in Engineering & Applied Sciences, Aerospace/Aeronautical Engineering, Agricultural Engineering & Bioengineering, and Architectural Engineering contains a wealth of information on colleges and universities that offer graduate work these exciting fields. The institutions listed include those in the United States and Canada, as well as international institutions that are accredited by U.S. accrediting bodies. Up-to-date information, collected through Peterson's Annual Survey of Graduate and Professional Institutions, provides valuable information on degree offerings, professional accreditation, jointly offered degrees, part-time and evening/weekend programs, postbaccalaureate distance degrees, faculty, students, degree requirements, entrance requirements, expenses, financial support, faculty research, and unit head and application contact information. Readers will find helpful links to in-depth descriptions that offer additional detailed information about a specific program or department, faculty members and their research, and much more. In addition, there are valuable articles on financial assistance, the graduate admissions process, advice for international and minority students, and facts about accreditation, with a current list of accrediting agencies.
Download or read book Environmental Health Perspectives written by and published by . This book was released on 2004 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Grants Index written by National Institutes of Health (U.S.). Division of Research Grants and published by . This book was released on 1975 with total page 1212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Signal Processing and Machine Learning for Biomedical Big Data written by Ervin Sejdic and published by CRC Press. This book was released on 2018-07-04 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the healthcare domain, big data is defined as any ``high volume, high diversity biological, clinical, environmental, and lifestyle information collected from single individuals to large cohorts, in relation to their health and wellness status, at one or several time points.'' Such data is crucial because within it lies vast amounts of invaluable information that could potentially change a patient's life, opening doors to alternate therapies, drugs, and diagnostic tools. Signal Processing and Machine Learning for Biomedical Big Data thus discusses modalities; the numerous ways in which this data is captured via sensors; and various sample rates and dimensionalities. Capturing, analyzing, storing, and visualizing such massive data has required new shifts in signal processing paradigms and new ways of combining signal processing with machine learning tools. This book covers several of these aspects in two ways: firstly, through theoretical signal processing chapters where tools aimed at big data (be it biomedical or otherwise) are described; and, secondly, through application-driven chapters focusing on existing applications of signal processing and machine learning for big biomedical data. This text aimed at the curious researcher working in the field, as well as undergraduate and graduate students eager to learn how signal processing can help with big data analysis. It is the hope of Drs. Sejdic and Falk that this book will bring together signal processing and machine learning researchers to unlock existing bottlenecks within the healthcare field, thereby improving patient quality-of-life. Provides an overview of recent state-of-the-art signal processing and machine learning algorithms for biomedical big data, including applications in the neuroimaging, cardiac, retinal, genomic, sleep, patient outcome prediction, critical care, and rehabilitation domains. Provides contributed chapters from world leaders in the fields of big data and signal processing, covering topics such as data quality, data compression, statistical and graph signal processing techniques, and deep learning and their applications within the biomedical sphere. This book’s material covers how expert domain knowledge can be used to advance signal processing and machine learning for biomedical big data applications.
Download or read book Bulletin of Electrical Engineering and Informatics written by Tole Sutikno and published by Institute of Advanced Engineering and Science. This book was released on 2014-06-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bulletin of Electrical Engineering and Informatics (Buletin Teknik Elektro dan Informatika) ISSN: 2089-3191, e-ISSN: 2302-9285 is open to submission from scholars and experts in the wide areas of electrical, electronics, instrumentation, control, telecommunication and computer engineering from the global world. The journal publishes original papers in the field of electrical, electronics, instrumentation & control, telecommunication, computer and informatics engineering. Vol 3, No 2 June 2014 Table of Contents Predictions on the Development Dimensions of Provincial Tourism Discipline Based on the Artificial Neural Network BP Model PDF Yang Yang, Jun Hu, Mu Zhang 69-76 Study on the Rough-set-based Clustering Algorithm for Sensor Networks PDF Fengmei Liang, Liyuan Zhang, Peng Sun 77-90 Varying Vector Pulse Width Modulation for Three Phase Inverter PDF Raju J, Kowsalya M 91-100 Optimal Determination of Size and Site of DGs in Mesh System Using PSO PDF Mohammad Salehi Male, Adel Akbari Majd, Ramtin Rasouli Nezhad 101-108 Voltage Sag Mitigation and Load Reactive Power Compensation by UPQC PDF P. Ajitha, D. Jananisri 109-112 A Power Quality Improvement for Microgrid Inverter Operated In Grid Connected and Grid Disconnected Modes PDF M. Tamil Selvi, D.G unapriya 113-118 Harmonic Reduction in Variable Frequency Drives Using Active Power Filter PDF M. Tamilvani, K. Nithya, M. Srinivasan, S.U Prabha 119-126 Sampled Reference Frame Algorithm Based on Space Vector Pulse Width Modulation for Five Level Cascaded H-Bridge Inverter PDF Gomathi C, Navya Nagath, Veerakumar S 127-140 Subthreshold Dual Mode Logic PDF J.Nageswara Reddy, T. Sathyanarayana, M.A. Khadar Baba 141-148
