Download or read book System Analysis and Modeling Theory and Practice written by Oystein Haugen and published by Springer. This book was released on 2013-02-11 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised papers of the proceedings of the 7th International Workshop on System Analysis and Modeling, SAM 2012, held in Innsbruck, Austria, in October 2012. The 12 papers presented were carefully reviewed and selected from 27 submissions. In addition, the book contains two keynote speeches in full-paper length. The contributions are organized in topical sections named: test and analysis, language enhancements, fuzzy subjects, components and composition, and configuring and product lines.

Download or read book Power Systems Modelling and Fault Analysis written by Nasser Tleis and published by Elsevier. This book was released on 2007-11-30 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive practical treatment of the modelling of electrical power systems, and the theory and practice of fault analysis of power systems covering detailed and advanced theories as well as modern industry practices.The continuity and quality of electricity delivered safely and economically by today's and future's electrical power networks are important for both developed and developing economies. The correct modelling of power system equipment and correct fault analysis of electrical networks are pre-requisite to ensuring safety and they play a critical role in the identification of economic network investments. Environmental and economic factors require engineers to maximise the use of existing assets which in turn require accurate modelling and analysis techniques. The technology described in this book will always be required for the safe and economic design and operation of electrical power systems. The book describes relevant advances in industry such as in the areas of international standards developments, emerging new generation technologies such as wind turbine generators, fault current limiters, multi-phase fault analysis, measurement of equipment parameters, probabilistic short-circuit analysis and electrical interference.*A fully up-to-date guide to the analysis and practical troubleshooting of short-circuit faults in electricity utilities and industrial power systems*Covers generators, transformers, substations, overhead power lines and industrial systems with a focus on best-practice techniques, safety issues, power system planning and economics*North American and British / European standards covered

Download or read book Proceedings of the 7th International Conference on System Analysis and Modeling Theory and Practice written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power System Dynamics with Computer Based Modeling and Analysis written by Yoshihide Hase and published by John Wiley & Sons. This book was released on 2020-01-21 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique combination of theoretical knowledge and practical analysis experience Derived from Yoshihide Hases Handbook of Power Systems Engineering, 2nd Edition, this book provides readers with everything they need to know about power system dynamics. Presented in three parts, it covers power system theories, computation theories, and how prevailed engineering platforms can be utilized for various engineering works. It features many illustrations based on ETAP to help explain the knowledge within as much as possible. Recompiling all the chapters from the previous book, Power System Dynamics with Computer Based Modeling and Analysis offers nineteen new and improved content with updated information and all new topics, including two new chapters on circuit analysis which help engineers with non-electrical engineering backgrounds. Topics covered include: Essentials of Electromagnetism; Complex Number Notation (Symbolic Method) and Laplace-transform; Fault Analysis Based on Symmetrical Components; Synchronous Generators; Induction-motor; Transformer; Breaker; Arrester; Overhead-line; Power cable; Steady-State/Transient/Dynamic Stability; Control governor; AVR; Directional Distance Relay and R-X Diagram; Lightning and Switching Surge Phenomena; Insulation Coordination; Harmonics; Power Electronics Applications (Devices, PE-circuit and Control) and more. Combines computer modeling of power systems, including analysis techniques, from an engineering consultants perspective Uses practical analytical software to help teach how to obtain the relevant data, formulate what-if cases, and convert data analysis into meaningful information Includes mathematical details of power system analysis and power system dynamics Power System Dynamics with Computer-Based Modeling and Analysis will appeal to all power system engineers as well as engineering and electrical engineering students.

Download or read book Systems Analysis and Design for Advanced Modeling Methods Best Practices written by Bajaj, Akhilesh and published by IGI Global. This book was released on 2009-04-30 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers research in the area of systems analysis and design practices and methodologies.

Download or read book System Engineering Analysis Design and Development written by Charles S. Wasson and published by John Wiley & Sons. This book was released on 2015-11-16 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the first edition: “This excellent text will be useful to everysystem engineer (SE) regardless of the domain. It covers ALLrelevant SE material and does so in a very clear, methodicalfashion. The breadth and depth of the author's presentation ofSE principles and practices is outstanding.” –Philip Allen This textbook presents a comprehensive, step-by-step guide toSystem Engineering analysis, design, and development via anintegrated set of concepts, principles, practices, andmethodologies. The methods presented in this text apply to any typeof human system -- small, medium, and large organizational systemsand system development projects delivering engineered systems orservices across multiple business sectors such as medical,transportation, financial, educational, governmental, aerospace anddefense, utilities, political, and charity, among others. Provides a common focal point for “bridgingthe gap” between and unifying System Users, System Acquirers,multi-discipline System Engineering, and Project, Functional, andExecutive Management education, knowledge, and decision-making fordeveloping systems, products, or services Each chapter provides definitions of key terms,guiding principles, examples, author’s notes, real-worldexamples, and exercises, which highlight and reinforce key SE&Dconcepts and practices Addresses concepts employed in Model-BasedSystems Engineering (MBSE), Model-Driven Design (MDD), UnifiedModeling Language (UMLTM) / Systems Modeling Language(SysMLTM), and Agile/Spiral/V-Model Development such asuser needs, stories, and use cases analysis; specificationdevelopment; system architecture development; User-Centric SystemDesign (UCSD); interface definition & control; systemintegration & test; and Verification & Validation(V&V) Highlights/introduces a new 21st Century SystemsEngineering & Development (SE&D) paradigm that is easy tounderstand and implement. Provides practices that are critical stagingpoints for technical decision making such as Technical StrategyDevelopment; Life Cycle requirements; Phases, Modes, & States;SE Process; Requirements Derivation; System ArchitectureDevelopment, User-Centric System Design (UCSD); EngineeringStandards, Coordinate Systems, and Conventions; et al. Thoroughly illustrated, with end-of-chapter exercises andnumerous case studies and examples, Systems EngineeringAnalysis, Design, and Development, Second Edition is a primarytextbook for multi-discipline, engineering, system analysis, andproject management undergraduate/graduate level students and avaluable reference for professionals.

Download or read book Theory of Modeling and Simulation written by Bernard P. Zeigler and published by Academic Press. This book was released on 2000-01-10 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased computational power and software tools available to engineers have increased the use and dependence on modeling and computer simulation throughout the design process. These tools have given engineers the capability of designing highly complex systems and computer architectures that were previously unthinkable. Every complex design project, from integrated circuits, to aerospace vehicles, to industrial manufacturing processes requires these new methods. This book fulfills the essential need of system and control engineers at all levels in understanding modeling and simulation. This book, written as a true text/reference has become a standard sr./graduate level course in all EE departments worldwide and all professionals in this area are required to update their skills. The book provides a rigorous mathematical foundation for modeling and computer simulation. It provides a comprehensive framework for modeling and simulation integrating the various simulation approaches. It covers model formulation, simulation model execution, and the model building process with its key activities model abstraction and model simplification, as well as the organization of model libraries. Emphasis of the book is in particular in integrating discrete event and continuous modeling approaches as well as a new approach for discrete event simulation of continuous processes. The book also discusses simulation execution on parallel and distributed machines and concepts for simulation model realization based on the High Level Architecture (HLA) standard of the Department of Defense. Presents a working foundation necessary for compliance with High Level Architecture (HLA) standards Provides a comprehensive framework for continuous and discrete event modeling and simulation Explores the mathematical foundation of simulation modeling Discusses system morphisms for model abstraction and simplification Presents a new approach to discrete event simulation of continuous processes Includes parallel and distributed simulation of discrete event models Presents a concept to achieve simulator interoperability in the form of the DEVS-Bus

Download or read book Systems Modelling written by Michael Pidd and published by Wiley. This book was released on 2004-03-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has always been an uneasy relationship between the 'hard' and 'soft' schools of management science. Featuring original insights from leading lights in the field, this accessibly written book begins by examining theoretical aspects of the hard/soft debate. It then goes on to consider how the two schools can be brought together in a new approach, integrating elements of both disciplines, and explores practical aspects of this with real-world examples. Highlights include Colin Eden and Fran Ackermann on soft OR models, Peter Checkland and Sue Holwell on classic and soft OR, and John Morecroft on learning in System Dynamics Practice. A concluding chapter brings the thinking of the contributors together and points the way forward.

Download or read book Principles of System Identification written by Arun K. Tangirala and published by CRC Press. This book was released on 2018-10-08 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master Techniques and Successfully Build Models Using a Single Resource Vital to all data-driven or measurement-based process operations, system identification is an interface that is based on observational science, and centers on developing mathematical models from observed data. Principles of System Identification: Theory and Practice is an introductory-level book that presents the basic foundations and underlying methods relevant to system identification. The overall scope of the book focuses on system identification with an emphasis on practice, and concentrates most specifically on discrete-time linear system identification. Useful for Both Theory and Practice The book presents the foundational pillars of identification, namely, the theory of discrete-time LTI systems, the basics of signal processing, the theory of random processes, and estimation theory. It explains the core theoretical concepts of building (linear) dynamic models from experimental data, as well as the experimental and practical aspects of identification. The author offers glimpses of modern developments in this area, and provides numerical and simulation-based examples, case studies, end-of-chapter problems, and other ample references to code for illustration and training. Comprising 26 chapters, and ideal for coursework and self-study, this extensive text: Provides the essential concepts of identification Lays down the foundations of mathematical descriptions of systems, random processes, and estimation in the context of identification Discusses the theory pertaining to non-parametric and parametric models for deterministic-plus-stochastic LTI systems in detail Demonstrates the concepts and methods of identification on different case-studies Presents a gradual development of state-space identification and grey-box modeling Offers an overview of advanced topics of identification namely the linear time-varying (LTV), non-linear, and closed-loop identification Discusses a multivariable approach to identification using the iterative principal component analysis Embeds MATLAB® codes for illustrated examples in the text at the respective points Principles of System Identification: Theory and Practice presents a formal base in LTI deterministic and stochastic systems modeling and estimation theory; it is a one-stop reference for introductory to moderately advanced courses on system identification, as well as introductory courses on stochastic signal processing or time-series analysis.The MATLAB scripts and SIMULINK models used as examples and case studies in the book are also available on the author's website: http://arunkt.wix.com/homepage#!textbook/c397

Download or read book Systems Analysis and Policy Sciences written by Robert M. Krone and published by John Wiley & Sons. This book was released on 1980 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Systems Science Theory Analysis Modeling and Design written by George E. Mobus and published by Springer Nature. This book was released on 2022-03-09 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a comprehensive approach to applying systems science formally to the deep analysis of a wide variety of complex systems. Detailed ‘how-to’ examples of the three phases (analysis-modeling-design) of systems science are applied to systems of various types (machines, organic (e.g. ecosystem), and supra-organic (e.g. business organizations and government). The complexity of the global system has reached proportions that seriously challenge our abilities to understand the consequences of our use of technology, modification of natural ecosystems, or even how to govern ourselves. For this reason, complex mathematics is eschewed when simpler structures will suffice, allowing the widest possible audience to apply and benefit from the available tools and concepts of systems science in their own work. The book shows, in detail, how to functionally and structurally deconstruct complex systems using a fundamental language of systems. It shows how to capture the discovered details in a structured knowledge base from which abstract models can be derived for simulation. The knowledge base is also shown to be a basis for generating system design specifications for human-built artifacts, or policy recommendations/policy mechanisms for socio-economic-ecological systems management. The book builds on principles and methods found in the authors’ textbook Principles of Systems Science (co-authored with Michael Kalton), but without prerequisites. It will appeal to a broad audience that deals with complex systems every day, from design engineers to economic and ecological systems managers and policymakers.

Download or read book Modeling Cities and Regions as Complex Systems written by Roger White and published by MIT Press. This book was released on 2015-09-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory and practice of modeling cities and regions as complex, self-organizing systems, presenting widely used cellular automata-based models, theoretical discussions, and applications. Cities and regions grow (or occasionally decline), and continuously transform themselves as they do so. This book describes the theory and practice of modeling the spatial dynamics of urban growth and transformation. As cities are complex, adaptive, self-organizing systems, the most appropriate modeling framework is one based on the theory of self-organizing systems—an approach already used in such fields as physics and ecology. The book presents a series of models, most of them developed using cellular automata (CA), which are inherently spatial and computationally efficient. It also provides discussions of the theoretical, methodological, and philosophical issues that arise from the models. A case study illustrates the use of these models in urban and regional planning. Finally, the book presents a new, dynamic theory of urban spatial structure that emerges from the models and their applications. The models are primarily land use models, but the more advanced ones also show the dynamics of population and economic activities, and are integrated with models in other domains such as economics, demography, and transportation. The result is a rich and realistic representation of the spatial dynamics of a variety of urban phenomena. The book is unique in its coverage of both the general issues associated with complex self-organizing systems and the specifics of designing and implementing models of such systems.

Download or read book Frameworks for Developing Efficient Information Systems Models Theory and Practice written by Krogstie, John and published by IGI Global. This book was released on 2013-06-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: As advances in technology continue to generate the collective knowledge of an organization and its operations, strategic models for information systems are developed in order to arrange business processes and business data. Frameworks for Developing Efficient Information Systems: Models, Theory, and Practice presents research and practices on the advancements in systems analysis and design. These theoretical frameworks and practical solutions are useful for researchers, practitioners, and academicians as this book aims to bridge the communication gap between business managers and system designers.

Download or read book Complex Systems in Sport written by Keith Davids and published by Routledge. This book was released on 2013-11-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex systems in nature are those with many interacting parts, all capable of influencing global system outcomes. There is a growing body of research that has modeled sport performance from a complexity sciences perspective, studying the behavior of individual athletes and sports teams as emergent phenomena which self-organise under interacting constraints. This book is the first to bring together experts studying complex systems in the context of sport from across the world to collate core theoretical ideas, current methodologies and existing data into one comprehensive resource. It offers new methods of analysis for investigating representative complex sport movements and actions at an individual and team level, exploring the application of methodologies from the complexity sciences in the context of sports performance and the organization of sport practice. Complex Systems in Sport is important reading for any advanced student or researcher working in sport and exercise science, sports coaching, kinesiology or human movement.

Download or read book System of systems Modeling and Analysis written by Daniel A. DeLaurentis and published by . This book was released on 2022-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "System-of-Systems Modeling and Analysis provides the reader with motivation, theory, methodology, and examples of modeling and analysis for system of system problems. The book is intended for senior undergraduate students in engineering programs studying System-of-Systems Modeling, System-of-Systems Analysis, and System-of-Systems Engineering courses. Professional engineers will also benefit from Methods, Tools, and Processes (MTP) and examples as a baseline for specific user applications. Providing a bridge between theory and practice for modeling and analysis of SoS, this book includes generalized concepts and Methods, Tools, and Processes (MTP) applicable to SoS"--

Download or read book Handbook of Conceptual Modeling written by David W. Embley and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conceptual modeling is about describing the semantics of software applications at a high level of abstraction in terms of structure, behavior, and user interaction. Embley and Thalheim start with a manifesto stating that the dream of developing information systems strictly by conceptual modeling – as expressed in the phrase “the model is the code” – is becoming reality. The subsequent contributions written by leading researchers in the field support the manifesto's assertions, showing not only how to abstractly model complex information systems but also how to formalize abstract specifications in ways that let developers complete programming tasks within the conceptual model itself. They are grouped into sections on programming with conceptual models, structure modeling, process modeling, user interface modeling, and special challenge areas such as conceptual geometric modeling, information integration, and biological conceptual modeling. The Handbook of Conceptual Modeling collects in a single volume many of the best conceptual-modeling ideas, techniques, and practices as well as the challenges that drive research in the field. Thus it is much more than a traditional handbook for advanced professionals, as it also provides both a firm foundation for the field of conceptual modeling, and points researchers and graduate students towards interesting challenges and paths for how to contribute to this fundamental field of computer science.

Download or read book Financial Modelling written by Joerg Kienitz and published by John Wiley & Sons. This book was released on 2013-02-18 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Financial modelling Theory, Implementation and Practice with MATLAB Source Jörg Kienitz and Daniel Wetterau Financial Modelling - Theory, Implementation and Practice with MATLAB Source is a unique combination of quantitative techniques, the application to financial problems and programming using Matlab. The book enables the reader to model, design and implement a wide range of financial models for derivatives pricing and asset allocation, providing practitioners with complete financial modelling workflow, from model choice, deriving prices and Greeks using (semi-) analytic and simulation techniques, and calibration even for exotic options. The book is split into three parts. The first part considers financial markets in general and looks at the complex models needed to handle observed structures, reviewing models based on diffusions including stochastic-local volatility models and (pure) jump processes. It shows the possible risk-neutral densities, implied volatility surfaces, option pricing and typical paths for a variety of models including SABR, Heston, Bates, Bates-Hull-White, Displaced-Heston, or stochastic volatility versions of Variance Gamma, respectively Normal Inverse Gaussian models and finally, multi-dimensional models. The stochastic-local-volatility Libor market model with time-dependent parameters is considered and as an application how to price and risk-manage CMS spread products is demonstrated. The second part of the book deals with numerical methods which enables the reader to use the models of the first part for pricing and risk management, covering methods based on direct integration and Fourier transforms, and detailing the implementation of the COS, CONV, Carr-Madan method or Fourier-Space-Time Stepping. This is applied to pricing of European, Bermudan and exotic options as well as the calculation of the Greeks. The Monte Carlo simulation technique is outlined and bridge sampling is discussed in a Gaussian setting and for Lévy processes. Computation of Greeks is covered using likelihood ratio methods and adjoint techniques. A chapter on state-of-the-art optimization algorithms rounds up the toolkit for applying advanced mathematical models to financial problems and the last chapter in this section of the book also serves as an introduction to model risk. The third part is devoted to the usage of Matlab, introducing the software package by describing the basic functions applied for financial engineering. The programming is approached from an object-oriented perspective with examples to propose a framework for calibration, hedging and the adjoint method for calculating Greeks in a Libor market model. Source code used for producing the results and analysing the models is provided on the author's dedicated website, http://www.mathworks.de/matlabcentral/fileexchange/authors/246981.