Download or read book Information Systems Engineering From Data Analysis to Process Networks written by Johannesson, Paul and published by IGI Global. This book was released on 2008-04-30 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information systems belong to the most complex artifacts built in today's society. Developing, maintaining, and using an information system raises a large number of difficult problems, ranging from purely technical to organizational and social. Information Systems Engineering: From Data Analysis to Process Networks presents the most current research on existing and emergent trends on conceptual modeling and information systems engineering, bridging the gap between research and practice by providing a much-needed reference point on the design of software systems that evolve seamlessly to adapt to rapidly changing business and organizational practices.
Download or read book Adoption of LMS in Higher Educational Institutions of the Middle East written by Rashid A. Khan and published by Springer Nature. This book was released on 2020-07-28 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the adoption of learning management systems (LMS) in higher education institutions. It presents influential predictors that may impact instructors’ behavioral intention to adopt learning management systems in the context of Arab culture, as well as a unique model of technology acceptance that draws on and combines previous technology adoption models (i.e., a modified unified theory of acceptance and use of technology model – UTAUT2). Moreover, this study extends the UTAUT2 model by including Hofstede’s (1980) cultural dimensions, and technology awareness as the moderators of the model. It also describes the explanatory technique approach used to collect quantitative data from the instructors at higher education institutions in Saudi Arabia and were analyzed with structural equation modeling using SPSS/Amos software. The findings revealed that facilitating conditions were the strongest predictor of behavioral intention to adopt an LMS, followed by performance expectancy and hedonic motivation, technology awareness, and cultural dimensions exerted a moderating influence on instructors’ behavioral intention to use LMS in their teaching. By including new constructs, this becomes the first study of its kind exploring instructors’ use of LMS in Higher Educational Institutions of Saudi Arabia and other countries of the Middle East. It offers practical insights for a broad range of researchers and professionals at higher education institutions and serves as a reference guide for designers of learning management systems (e.g., blackboard systems), policymakers, and the Ministry of Education staff.
Download or read book Visual Information and Information Systems written by Nies Huijsmans and published by Springer. This book was released on 2003-07-31 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third International Conference on Visual Information Systems, VISUAL'99, held in Amsterdam, The Netherlands, in June 1999. The 100 revised papers presented were carefully reviewed and selected from numerous submissions. The book is divided into topical sections on visual information systems, interactive visual query, Internet search engines, video parsing, spatial data, visual languages, features and indexes for image retrieval, object retrieval, ranking and performance, shape retrieval, retrieval systems, image compression, virtual environments, recognition systems, and visualization systems.
Download or read book Advances in Knowledge Discovery and Management written by Bruno Pinaud and published by Springer. This book was released on 2019-06-20 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights novel research in Knowledge Discovery and Management (KDM), gathering the extended, peer-reviewed versions of outstanding papers presented at the annual conferences EGC’2017 & EGC’2018. The EGC conference cycle was founded by the International French-speaking EGC society (“Extraction et Gestion des Connaissances”) in 2003, and has since become a respected fixture among the French-speaking community. In addition to the annual conference, the society organizes various other events in order to promote exchanges between researchers and companies concerned with KDM and its applications to business, administration, industry and public organizations. Addressing novel research in data science, semantic Web, clustering, and classification, the content presented here will chiefly benefit researchers interested in these fields, including Ph.D./M.Sc. students, at public and private laboratories alike.
Download or read book Availability Reliability and Security in Information Systems written by Stephanie Teufel and published by Springer. This book was released on 2014-09-03 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the refereed proceedings of two workshops: the International Cross-Domain Conference and Workshop on Availability, Reliability and Security, CD-ARES 2014, and the 4th International Workshop on Security and Cognitive Informatics for Homeland Defense, SeCIHD 2014, co-located with the International Conference on Availability, Reliability and Security, ARES 2014, held in Fribourg, Switzerland, in September 2014. The 23 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers deal with knowledge management, software security, mobile and social computing, enterprise information systems, homeland security and information processing.
Download or read book Intelligent Information and Database Systems written by Ngoc Thanh Nguyen and published by Springer Nature. This book was released on 2020-03-03 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNAI 12033 and 11034 constitutes the refereed proceedings of the 12th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2020, held in Phuket, Thailand, in March 2020. The total of 105 full papers accepted for publication in these proceedings were carefully reviewed and selected from 285 submissions. The papers of the first volume are organized in the following topical sections: Knowledge Engineering and Semantic Web, Natural Language Processing, Decision Support and Control Systems, Computer Vision Techniques, Machine Learning and Data Mining, Deep Learning Models, Advanced Data Mining Techniques and Applications, Multiple Model Approach to Machine Learning. The papers of the second volume are divided into these topical sections: Application of Intelligent Methods to Constrained Problems, Automated Reasoning with Applications in Intelligent Systems, Current Trends in Arti cial Intelligence, Optimization, Learning,and Decision-Making in Bioinformatics and Bioengineering, Computer Vision and Intelligent Systems, Data Modelling and Processing for Industry 4.0, Intelligent Applications of Internet of Things and Data AnalysisTechnologies, Intelligent and Contextual Systems, Intelligent Systems and Algorithms in Information Sciences, Intelligent Supply Chains and e-Commerce, Privacy, Security and Trust in Arti cial Intelligence, Interactive Analysis of Image, Video and Motion Data in LifeSciences.
Download or read book Automation and Control written by Elmer P. Dadios and published by BoD – Books on Demand. This book was released on 2022-05-25 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in automation and control today cover many areas of technology where human input is minimized. This book discusses numerous types and applications of automation and control. Chapters address topics such as building information modeling (BIM)–based automated code compliance checking (ACCC), control algorithms useful for military operations and video games, rescue competitions using unmanned aerial-ground robots, and stochastic control systems.
Download or read book Product Lifecycle Management and the Industry of the Future written by José Ríos and published by Springer. This book was released on 2017-12-19 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 14th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2017, held in Seville, Spain, in July 2017. The 64 revised full papers presented were carefully reviewed and selected from 78 submissions. The papers are organized in the following topical sections: PLM maturity, implementation and adoption; PLM for digital factories; PLM and process simulation; PLM, CAX and knowledge management; PLM and education; BIM; cyber-physical systems; modular design and products; new product development; ontologies, knowledge and data models; and Product, Service, Systems (PSS).
Download or read book Advanced Information Systems Engineering Workshops written by Xavier Franch and published by Springer. This book was released on 2013-06-20 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of eight international workshops held in Valencia, Spain, in conjunction with the 25th International Conference on Advanced Information Systems Engineering, CAiSE 2013, in June 2013. The 36 full and 12 short papers have undertaken a high-quality and selective acceptance policy, resulting in acceptance rates of up to 50% for full research papers. The eight workshops were Approaches for Enterprise Engineering Research (AppEER), International Workshop on BUSiness/IT ALignment and Interoperability (BUSITAL), International Workshop on Cognitive Aspects of Information Systems Engineering (COGNISE), Workshop on Human-Centric Information Systems (HC-IS), Next Generation Enterprise and Business Innovation Systems (NGEBIS), International Workshop on Ontologies and Conceptual Modeling (OntoCom), International Workshop on Variability Support in Information Systems (VarIS), International Workshop on Information Systems Security Engineering (WISSE).
Download or read book Signal written by and published by . This book was released on 1997 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Roadmap to the E Factory written by Jr., Alex N. Beavers and published by CRC Press. This book was released on 2001-03-27 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: As manufacturing control systems converge with manufacturing automation systems and systems supporting the back office, IT managers in manufacturing companies are being asked to oversee all their company's IT-including the manufacturing systems. Roadmap to the E-Factory explains what the IT manager needs to know about these unfamiliar systems. It discusses the information value chain, a concept which demonstrates how all computing resources contribute to the success of a manufacturing organization. The material also demonstrates the strategic value of IT, and it includes recommendations for managing the computing resources of a global manufacturing enterprise. An authoritative text on IT, manufacturing, and control systems, Roadmap to the E-Factory provides detailed information on: e-companies e-commerce o Lean manufacturing Supply chain management ERP Operations Emerging trends In addition to helping you gain a basic understanding of manufacturing systems, Roadmap to the E-Factory shows you how IT systems can most effectively support these systems and provides you with a set of recommendations that enables you to derive maximum benefit from them.
Download or read book EMIS 2023 written by Luning Liu and published by European Alliance for Innovation. This book was released on 2023-06-15 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the 2nd International Conference on Engineering Management and Information Science (EMIS 2023), held during December 24th-26th, 2023 (virtual event). With the theme of “bringing together global wisdom in scientific innovation to promote high-quality development”, the immediate purpose of this Conference was to gather experienced as well as young scientists who are interested in working actively on various aspects of engineering management and information science to drive development. The major topics covered in the Conference are: Project Management Information System, Logistics Information System, Intelligent Transportation Engineering, Passwords and Security Systems, Numerical Algorithms for Computers, Innovative Network Systems and Applications, Knowledge Acquisition and Management, etc... Here, scholars, experts, and researchers are welcomed to share their research progress and inspirations. It is a great opportunity to promote academic communication and collaboration worldwide.
Download or read book Advances in Production Management Systems Towards Smart Production Management Systems written by Farhad Ameri and published by Springer Nature. This book was released on 2019-08-23 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 566 and 567 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2019, held in Austin, TX, USA. The 161 revised full papers presented were carefully reviewed and selected from 184 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: lean production; production management in food supply chains; sustainability and reconfigurability of manufacturing systems; product and asset life cycle management in smart factories of industry 4.0; variety and complexity management in the era of industry 4.0; participatory methods for supporting the career choices in industrial engineering and management education; blockchain in supply chain management; designing and delivering smart services in the digital age; operations management in engineer-to-order manufacturing; the operator 4.0 and the Internet of Things, services and people; intelligent diagnostics and maintenance solutions for smart manufacturing; smart supply networks; production management theory and methodology; data-driven production management; industry 4.0 implementations; smart factory and IIOT; cyber-physical systems; knowledge management in design and manufacturing; collaborative product development; ICT for collaborative manufacturing; collaborative technoloy; applications of machine learning in production management; and collaborative technology.
Download or read book Making Supply Chain Management Work written by James B. Ayers and published by CRC Press. This book was released on 2001-12-13 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any supply chain improvement project, even if well conceived, has a good chance of failing, unless the accompanying information technology enables the design. Being prepared, understanding the risks and how to reduce them, will give you the edge you need. Combining a technology focus with practical advice, Making Supply Chain Management Work: Desig
Download or read book Les mots cl s du management Anglais written by and published by Editions Bréal. This book was released on with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pamphlets on Industrial Management and the Taylor System written by and published by . This book was released on 1926 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Management Systems Initiatives for a Sustainable World written by Irenilza Nääs and published by Springer. This book was released on 2017-03-15 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2016, held in Iguassu Falls, Brazil, in September 2016. The 117 revised full papers were carefully reviewed and selected from 164 submissions. They are organized in the following topical sections: computational intelligence in production management; intelligent manufacturing systems; knowledge-based PLM; modelling of business and operational processes; virtual, digital and smart factory; flexible, sustainable supply chains; large-scale supply chains; sustainable manufacturing; quality in production management; collaborative systems; innovation and collaborative networks; agrifood supply chains; production economics; lean manufacturing; cyber-physical technology deployments in smart manufacturing systems; smart manufacturing system characterization; knowledge management in production systems; service-oriented architecture for smart manufacturing systems; advances in cleaner production; sustainable production management; and operations management in engineer-to-order manufacturing.
