Download or read book Gasification for Synthetic Fuel Production written by R Luque and published by Elsevier. This book was released on 2014-08-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gasification involves the conversion of carbon sources without combustion to syngas, which can be used as a fuel itself or further processed to synthetic fuels. The technology provides a potentially more efficient means of energy generation than direct combustion. This book provides an overview of gasification science and engineering and the production of synthetic fuels by gasification from a variety of feedstocks. Part one introduces gasification, reviewing the scientific basis of the process and gasification engineering. Part two then addresses gasification and synthentic fuel production processes. Finally, chapters in part three outline the different applications of gasification, with chapters on the conversion of different types of feedstock. - Examines the design of gasifiers, the preparation of feedstocks, and the economic, environmental and policy issues related to gasification - Reviews gasification processes for liquid fuel production - Outlines the different applications of gasification technology
Download or read book Synthetic Fuels written by Ronald F. Probstein and published by Courier Corporation. This book was released on 2013-04-15 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the outgrowth of a graduate course the authors taught at the Massachusetts Institute of Technology, was designed to fill an urgent need—the training of engineers in the production of synthetic fuels to replace dwindling supplies of natural ones. The authors presented synthetic fuels as a unified engineering subject, while recognizing that many of its principles are well-understood aspects of various engineering fields. The presentation begins with a review of chemical and physical fundamentals and conversion fundamentals, and proceeds to coal gasification and gas upgrading. Subsequent chapters examine liquids and clean solids produced from coal, liquids obtained from oil shale and tar sands, biomass conversion, and environmental, economic, and related aspects of synthetic fuel use. The text is directed toward beginning graduate students and advanced undergraduates in chemical and mechanical engineering, but should also appeal to students from other disciplines, including environmental, mining, petroleum, and industrial engineering, as well as chemistry. It also serves as a reference and guide for professionals.
Download or read book Chemical Energy from Natural and Synthetic Gas written by Yatish T. Shah and published by CRC Press. This book was released on 2017-03-16 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercial development of energy from renewables and nuclear is critical to long-term industry and environmental goals. However, it will take time for them to economically compete with existing fossil fuel energy resources and their infrastructures. Gas fuels play an important role during and beyond this transition away from fossil fuel dominance to a balanced approach to fossil, nuclear, and renewable energies. Chemical Energy from Natural and Synthetic Gas illustrates this point by examining the many roles of natural and synthetic gas in the energy and fuel industry, addressing it as both a "transition" and "end game" fuel. The book describes various types of gaseous fuels and how are they are recovered, purified, and converted to liquid fuels and electricity generation and used for other static and mobile applications. It emphasizes methane, syngas, and hydrogen as fuels, although other volatile hydrocarbons are considered. It also covers storage and transportation infrastructure for natural gas and hydrogen and methods and processes for cleaning and reforming synthetic gas. The book also deals applications, such as the use of natural gas in power production in power plants, engines, turbines, and vehicle needs. Presents a unified and collective look at gas in the energy and fuel industry, addressing it as both a "transition" and "end game" fuel. Emphasizes methane, syngas, and hydrogen as fuels. Covers gas storage and transport infrastructure. Discusses thermal gasification, gas reforming, processing, purification and upgrading. Describes biogas and bio-hydrogen production. Deals with the use of natural gas in power production in power plants, engines, turbines, and vehicle needs.
Download or read book Synthetic Fuels Handbook written by James Speight and published by McGraw Hill Professional. This book was released on 2008-06-22 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capitalize on the Vast Potential of Alternative Energy Sources Such as Fuel Cells and Biofuels Synthetic Fuels Handbook is a comprehensive guide to the benefits and trade-offs of numerous alternative fuels, presenting expert analyses of the different properties, processes, and performance characteristics of each fuel. It discusses the concept systems and technology involved in the production of fuels on both industrial and individual scales. Written by internationally renowned fuels expert James G. Speight, this vital resource describes the production and properties of fuels from natural gas and natural gas hydrates...tar sand bitumen...coal...oil shale...synthesis gas...crops...wood sources...biomass...industrial and domestic waste...landfill gas...and much more. Using both U.S. and SI units, Synthetic Fuels Handbook features: Information on conventional and nonconventional fuel sources Discussion of the production of alternative fuels on both industrial and individual scales Analyses of properties and uses of gaseous, liquid, and solid fuels from different sources Comparison of properties of alternative fuels with petroleum-based fuels Discover All the Benefits and Trade-Offs of Synthetic Fuels • Fuel sources: conventional and nonconventional • Natural gas and natural gas hydrates • Petroleum and heavy oil • Tar sand bitumen • Coal • Oil shale • Synthesis gas • Crops • Wood sources • Biomass • Industrial and domestic waste • Landfill gas • Comparison of the properties and uses of gaseous fuels from different sources • Comparison of the properties and uses of liquid fuels from different sources • Comparison of the properties and uses of solid fuels from different sources
Download or read book Ammonia Fuel Cells written by Ibrahim Dincer and published by Elsevier. This book was released on 2020-04-09 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ammonia Fuel Cells covers all aspects of ammonia fuel cell technologies and their applications, including their theoretical analysis, modeling studies and experimental investigations. The book analyzes the role of integrated ammonia fuel cell systems within various renewable energy resources and existing energy systems. Covers the types of ammonia fuel cells that have been developed over history Features explanations of the underlying fundamentals and principles of ammonia fuel cells, along with methods to assess the performance of different types of cell Includes case studies considering different applications of ammonia fuel cells and their significance in the future of clean energy
Download or read book Power to Fuel written by Giuseppe Spazzafumo and published by Academic Press. This book was released on 2021-05-25 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power to Fuel: How to Speed Up a Hydrogen Economy highlights how the surplus of electricity from renewable sources can be usefully accumulated thanks to hydrogen overcoming the obstacles that can prevent the final use of hydrogen on a large scale. The book includes an introduction and sections on the production of hydrogen, conversion of hydrogen into synthetic fuel, the power-to-fuel concept, and renewable energy source descriptions. The second and third levels are structured identically with a standalone approach that covers established and commercial pathways, emerging pathways, and cost analysis sections within each subject specific chapter, making the content easily referenced and applied.Readers will find details on the state-of-the-art and emerging technologies of various power to fuels options suitable for different final uses of the stored energy, as well as figures and diagrams that illustrate and compare the different processes. The book contains examples of existing plants and pilot projects that will be useful for academics dealing with renewable energies and energy storage. - Discusses possible applications of synthetic fuels, describing existing plants for fuel production - Contains opinions on opportunities offered by the power to fuel concept and by single technologies - Presents power to fuel techno-economic models and calculations down to system level
Download or read book Sustainable Alternative Syngas Fuel written by Chaouki Ghenai and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and use of sustainable and alternative fuels (syngas, biogas, biodiesel, bio-oil, hydrogen) derived from sources other than petroleum is needed due to the limited fossil fuel resources, the need for reduction of atmospheric greenhouse gas emissions, energy security, and to meet the future high energy demand due to population growth. New alternative fuels that can be produced locally and derived from renewable sources will be more sustainable compared to fossil fuels. Alternative and renewable fuels can be produced using different thermochemical and bio-chemical processes. Gasification is a thermochemical process used to produce syngas fuel (mainly hydrogen and carbon dioxide) from renewable (biomass) and conventional (coal) sources. The syngas fuels produced from the gasification process can be used for different applications: power generation (combustion of syngas fuel in gas turbine engines), heating, and transportation (internal combustion engines). This book intends to provide the reader with an overview of the current technologies, methods, and strategies of syngas fuel production, characterization, and application.
Download or read book Biorefinery Production Technologies for Chemicals and Energy written by Arindam Kuila and published by John Wiley & Sons. This book was released on 2020-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers almost all of the diverse aspects of utilizing lignocellulosic biomass for valuable biorefinery product development of chemicals, alternative fuels and energy. The world has shifted towards sustainable development for the generation of energy and industrially valuable chemicals. Biorefinery plays an important role in the integration of conversion process with high-end equipment facilities for the generation of energy, fuels and chemicals. The book is divided into four parts. The first part, "Basic Principles of Biorefinery," covers the concept of biorefinery, its application in industrial bioprocessing, the utilization of biomass for biorefinery application, and its future prospects and economic performance. The second part, "Biorefinery for Production of Chemicals," covers the production of bioactive compounds, gallic acid, C4, C5, and C6 compounds, etc., from a variety of substrates. The third part, "Biorefinery for Production of Alternative Fuel and Energy," covers sustainable production of bioethanol, biodiesel, and biogas from different types of substrates. The last part of this book discusses sequential utilization of wheat straw, material balance, and biorefinery approach. The approaches presented in this book will help readers/users from different areas like process engineering and biochemistry to plan integrated and inventive methods to trim down the expenditure of the industrial manufacture process to accomplish cost-effective feasible products in biorefinery.
Download or read book Hydrogen Fuel Cell Technology for Stationary Applications written by Badea, Gheorghe and published by IGI Global. This book was released on 2021-04-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional energy sources have gained and will continue to gain an increasing share of energy systems around the world. Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen is already part of today's chemical industry, but as an energy source, its rare advantages can only be obtained with the help of technologies. Currently, the fuel cell is considered the cleanest sustainable energy. With the development of fuel cells, hydrogen-based energy generation becomes a reality. Hydrogen Fuel Cell Technology for Stationary Applications is an essential publication that focuses on the advantages of hydrogen as a primary energy center and addresses its use in the sustainable future of stationary applications. While highlighting a broad range of topics including cost expectations, production methods, and social impact, this publication explores all aspects of the implementation and dissemination of fuel cell technology in the hope of establishing a sustainable marketplace for it. This book is ideally designed for fuel cell manufacturers, architects, electrical engineers, civil engineers, environmental engineers, advocates, manufacturers, mechanics, researchers, academicians, and students.
Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications
Download or read book Handbook of Alternative Fuel Technologies Second Edition written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels—including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation—fossil fuel resources are limited and may soon be on the verge of depletion in the near future. Measuring the correlation between quality of life, energy consumption, and the efficient utilization of energy, the Handbook of Alternative Fuel Technologies, Second Edition thoroughly examines the science and technology of alternative fuels and their processing technologies. It focuses specifically on environmental, technoeconomic, and socioeconomic issues associated with the use of alternative energy sources, such as sustainability, applicable technologies, modes of utilization, and impacts on society. Written with research and development scientists and engineers in mind, the material in this handbook provides a detailed description and an assessment of available and feasible technologies, environmental health and safety issues, governmental regulations, and issues and agendas for R&D. It also includes alternative energy networks for production, distribution, and consumption. What’s New in This Edition: Contains several new chapters of emerging interest and updates various chapters throughout Includes coverage of coal gasification and liquefaction, hydrogen technology and safety, shale fuel by hydraulic fracturing, ethanol from lignocellulosics, biodiesel, algae fuels, and energy from waste products Covers statistics, current concerns, and future trends A single-volume complete reference, the Handbook of Alternative Fuel Technologies, Second Edition contains relevant information on chemistry, technology, and novel approaches, as well as scientific foundations for further enhancements and breakthroughs. In addition to its purposes as a handbook for practicing scientists and engineers, it can also be used as a textbook or as a reference book on fuel science and engineering, energy and environment, chemical process design, and energy and environmental policy.
Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Beyond Oil and Gas written by George A. Olah and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is currently consuming about 85 million barrels of oil a day, and about two-thirds as much natural gas equivalent, both derived from non-renewable natural sources. In the foreseeable future, our energy needs will come from any available alternate source. Methanol is one such viable alternative, and also offers a convenient solution for efficient energy storage on a large scale. In this updated and enlarged edition, renowned chemists discuss in a clear and readily accessible manner the pros and cons of humankind's current main energy sources, while providing new ways to overcome obstacles. Following an introduction, the authors look at the interrelationship of fuels and energy, and at the extent of our non-renewable fossil fuels. They also discuss the hydrogen economy and its significant shortcomings. The main focus is on the conversion of CO2 from industrial as well as natural sources into liquid methanol and related DME, a diesel fuel substitute that can replace LNG and LPG. The book is rounded off with an optimistic look at future possibilities. A forward-looking and inspiring work that vividly illustrates potential solutions to our energy and environmental problems.
Download or read book Clean Coal Engineering Technology written by Bruce G. Miller and published by Elsevier. This book was released on 2010-11-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. - Clean Liquids and Gaseous Fuels from Coal for Electric Power - Integrated Gasification Combined Cycle (IGCC) systems - Pulverized-Coal Power Plants - Advanced Coal-Based Power Plants - Fluidized-Bed Combustion Technology - CO2 capture and sequestration
Download or read book Science and Technology of Ceramic Fuel Cells written by N.Q. Minh and published by Elsevier. This book was released on 1995-08-15 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic fuel cells, commonly known as solid oxide fuel cells (SOFCs), have been under development for a broad range of electric power generation applications. The most attractive feature of the SOFC is its clean and efficient production of electricity from a variety of fuels. The SOFC has the potential to be manufactured and operated cost-effectively. The widening interest in this technology, thus, arises from the continuing need to develop cleaner and more efficient means of converting energy sources into useful forms.This topical book provides a comprehensive treatise on solid oxide fuel cells and succeeds successfully in filling the gap in the market for a reference book in this field. Directed towards scientists, engineers, and technical managers working with SOFCs as well as ceramic devices based on conducting materials, and in related fields, the book will also be invaluable as a textbook for science and engineering courses.
Download or read book Energy Systems written by Nick Jenkins and published by . This book was released on 2019 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy supply is foundational to modern society, but damaging to the environment. This book takes a 'systems view', from extraction of primary fuel, through conversion to usable energy, and transportation to point of use. It explores initiatives to generate electricity in an environmentally benign manner, and decarbonise the supply of energy.