Download or read book Synthesis of Transparent Conducting Oxide Coatings written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A method and system for preparing a light transmitting and electrically conductive oxide film. The method and system includes providing an atomic layer deposition system, providing a first precursor selected from the group of cyclopentadienyl indium, tetrakis (dimethylamino) tin and mixtures thereof, inputting to the deposition system the first precursor for reaction for a first selected time, providing a purge gas for a selected time, providing a second precursor comprised of an oxidizer, and optionally inputting a second precursor into the deposition system for reaction and alternating for a predetermined number of cycles each of the first precursor, the purge gas and the second precursor to produce the oxide film.

Download or read book Transparent Conductive Materials written by David Levy and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.

Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.

Download or read book The Synthesis Characterisation and Application of Transparent Conducting Thin Films written by M. R. Waugh and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent conducting thin films of metal oxides, doped metal oxides, and carbon nanotubes (CNTs), have been produced using various deposition techniques, including: Aerosol Assisted Chemical Vapour Deposition (AACVD), Atmospheric Pressure Chemical Vapour Deposition (APCVD), and Spray Coating. The resultant thin films were tested for their performance in a number of applications, including: Low emissivity ('Low-E') glazing, photovoltaic electrode materials, gas sensing and photocatalysis. AACVD was shown as a viable, and attractive, deposition technique for the synthesis of tin oxide, and doped tin oxide thin films, which allows for controllable doping levels, crystallinity, and surface structure. The tailoring of these physical attributes allows for enhanced performance of the functional properties of the films, whereby, a lower growth temperature produced highly transparent, highly conductive coatings with a low haze value for 'Low-E' applications, whereas, higher growth temperatures produced the high electrical conductivity, transparency, and light scattering properties required for high performance electrodes in thin film photovoltaics. In addition, a dual coating methodology was developed using both AACVD, and APCVD, to grow tin oxide thin films in a rapid timescale, but with modified surface structures showing changes to the short range waviness, kurtosis, and the surface area. Growth of carbon nanotubes, using CVD, was investigated over a range of metal catalysts, with varying Pauling electronegativity values, and over a range of temperature, methane, and hydrogen conditions. A growth mechanism has been postulated, whereby, the electronegativity of the metal catalyst, and the solubility and diffusion of the carbon through that catalyst, affects the type and properties of the carbon structure produced. To the authors knowledge, this is the first reported growth of MWCNTs using a chromium solo-metal catalyst, and the first reported growth of the unique 'carbon nanofibres' which were produced using gold and silver metal catalysts. Functionalisation of SWCNTs using a microwave reflux process was shown to yield sulphonate and sulphone modified nanotubes, which are highly soluble in water and able to undergo spray coating to produce carbon nanotube, nanonet transparent conducting thin films. The functionalisation process was shown to be reversible upon heating of the modified nanotubes. AACVD has been deemed unable to produced doped zinc oxide transparent conducting films. However, undoped zinc oxide films were produced. They displayed a high photocatalytic action in the degredation of stearic acid, and a UV light induced superhydrophilicity. The modification and deposition techniques, established throughout this work, were utilised to form transparent, hybrid, metal oxide-CNT coatings, for gas sensing. The hybrid materials displayed enhanced response times to combustible target gases, which has been attributed to the catalytic effects of the exposed carbon nanotube surfaces; and to the spillover of adsorbed oxygen from the active nanotubes to the metal oxide surface.

Download or read book Nanoporous Transparent Conducting Oxides and New Solid Acid Catalysts written by Daniel Mieritz and published by . This book was released on 2016 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: New sol-gel routes were developed to fabricate transparent conducting oxide coatings for energy applications. Sol-gel synthesis was chosen because the metal oxide products have high surface area and porosity. Titanium sol-gel chemistry was the main focus of the studies, and the synthesis of macroporous antimony-doped tin oxide was also explored. The surface chemistry and band characteristics of anatase TiO2 show promise for solar energy purposes as photoelectrodes in DSSCs and as photocatalysts to degrade organic dyes and to split water. Modifying the band structure by increasing the conduction band edge energy is specifically of interest for reducing protons in water. To this end, a new sol-gel method was developed for incorporating Zr-dopant in nanoporous anatase TiO2. The products follow Vegards law up to 20 atom%, exhibiting surface area of 79 m2/g and pore volume of 0.20 cm3/g with average pore diameter of 10.3 nm; the conduction band edge energy increased by 0.22 eV and the band gap increased by 0.1 eV.In pursuit of a greener sol-gel route for TiO2 materials, a solution of TiOSO4 in water was explored. Success in obtaining a gel came by utilizing hydrogen peroxide as a ligand that suppressed precipitation reactions. Through modifying this sol-gel chemistry to obtain a solid acid, the new material hydrogen titanium phosphate sulfate, H1-xTi2(PO4)3-x(SO4)x, (0 x

Download or read book Preparation and Properties of Transparent Conductive Oxide Coatings written by Larissa Kaplan and published by . This book was released on 1997 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Semiconducting Transparent Thin Films written by Hans Hartnagel and published by CRC Press. This book was released on 1995 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of the properties, growth and applications of semiconducting transparent thin films, this book provides a single source reference for researchers in the field. It discusses the underlying physics of such films, and their commercial applications in such areas as gas sensors and temperature control coatings in the aerospace industry. It is clearly written, with sections on the different materials, different growth techniques, electrical properties, optical properties, and selected applications, for coatings, sensors, detectors and display devices. It is a valuable reference tool for the established researcher, and provides a comprehensive introcution to the subject for graduates of electrical and electronic engineering. The international team of authors, under the leadership of one of the world's authorities on the subject have written a book which has become the standard work in the field.

Download or read book Transparent Conducting Pure and Tin Doped Indium Oxide Films Preparation and Characterization written by Dr. B. Radhakrishna and published by Lulu.com. This book was released on 2019-03-26 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Badeker in 1907 observed that some materials are optically transparent in the visible light and electrically conducting [1]. Because of the increasing interest in electrically and electronically active materials, the search for materials and the techniques for producing semi-transparent electrically conducting films have gained much importance. In an intrinsic stoichiometric material, it is not possible to have simultaneously high transparency (>80%%) in the visible region and high electrical conductivity (>103 Ω cm-1). A variety of metals in thin film form (

Download or read book Transparent Electronics written by Antonio Facchetti and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge for producing “invisible” electronic circuitry and opto-electronic devices is that the transistor materials must be transparent to visible light yet have good carrier mobilities. This requires a special class of materials having “contra-indicated properties” because from the band structure point of view, the combination of transparency and conductivity is contradictory. Structured to strike a balance between introductory and advanced topics, this monograph juxtaposes fundamental science and technology / application issues, and essential materials characteristics versus device architecture and practical applications. The first section is devoted to fundamental materials compositions and their properties, including transparent conducting oxides, transparent oxide semiconductors, p-type wide-band-gap semiconductors, and single-wall carbon nanotubes. The second section deals with transparent electronic devices including thin-film transistors, photovoltaic cells, integrated electronic circuits, displays, sensors, solar cells, and electro-optic devices. Describing scientific fundamentals and recent breakthroughs such as the first “invisible” transistor, Transparent Electronics: From Synthesis to Applications brings together world renowned experts from both academia, national laboratories, and industry.

Download or read book Graphene for Transparent Conductors written by Qingbin Zheng and published by Springer. This book was released on 2015-07-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic presentation of the principles and practices behind the synthesis and functionalization of graphene and grapheme oxide (GO), as well as the fabrication techniques for transparent conductors from these materials. Transparent conductors are used in a wide variety of photoelectronic and photovoltaic devices, such as liquid crystal displays (LCDs), solar cells, optical communication devices, and solid-state lighting. Thin films made from indium tin oxide (ITO) have thus far been the dominant source of transparent conductors, and now account for 50% of indium consumption. However, the price of Indium has increased 1000% in the last 10 years. Graphene, a two-dimensional monolayer of sp2-bonded carbon atoms, has attracted significant interest because of its unique transport properties. Because of their high optical transmittance and electrical conductivity, thin film electrodes made from graphene nanosheets have been considered an ideal candidate to replace expensive ITO films. Graphene for Transparent Conductors offers a systematic presentation of the principles, theories and technical practices behind the structure–property relationship of the thin films, which are the key to the successful development of high-performance transparent conductors. At the same time, the unique perspectives provided in the applications of graphene and GO as transparent conductors will serve as a general guide to the design and fabrication of thin film materials for specific applications.

Download or read book Synthesis of Zinc Oxide by Sol Gel Method for Photoelectrochemical Cells written by Siti Salwa Alias and published by Springer Science & Business Media. This book was released on 2013-11-20 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the study of synthesized ZnO powder using Zn(CH3COO)2∙2H2O precursor, methanol (as solvent), and sodium hydroxide (NaOH) to vary the pH. The successfully synthesized ZnO powder from the sol-gel centrifugation and sol-gel storage methods were characterized and investigated by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, UV–visible spectroscopy, and photoluminescence test to compare the properties of the nanoparticles. The best characteristic of the ZnO powder from both methods was observed when the powders were coated on an ITO glass to fabricate a PEC. The current density–voltage performances of both PECs were investigated under luminescent and dark conditions.

Download or read book Synthesis and Characterization of Transparent Oxide Coatings with Enhanced Near Infrared Reflectance written by Alpana Ranade and published by . This book was released on 2011 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Transparent Conductors written by David S. Ginley and published by Springer Science & Business Media. This book was released on 2010-09-11 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent conducting materials are key elements in a wide variety of current technologies including flat panel displays, photovoltaics, organic, low-e windows and electrochromics. The needs for new and improved materials is pressing, because the existing materials do not have the performance levels to meet the ever- increasing demand, and because some of the current materials used may not be viable in the future. In addition, the field of transparent conductors has gone through dramatic changes in the last 5-7 years with new materials being identified, new applications and new people in the field. “Handbook of Transparent Conductors” presents transparent conductors in a historical perspective, provides current applications as well as insights into the future of the devices. It is a comprehensive reference, and represents the most current resource on the subject.

Download or read book Optical Thin Films and Coatings written by Angela Piegari and published by Woodhead Publishing. This book was released on 2018-06-19 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Thin Films and Coatings: From Materials to Applications, Second Edition, provides an overview of thin film materials and their properties, design and manufacture across a wide variety of application areas. Sections explore their design and manufacture and their unconventional features, including the scattering properties of random structures in thin films, optical properties at short wavelengths, thermal properties and color effects. Other chapters focus on novel materials, including organic optical coatings, surface multiplasmonics, optical thin films containing quantum dots, and optical coatings, including laser components, solar cells, displays and lighting, and architectural and automotive glass. The book presents a technical resource for researchers and engineers working with optical thin films and coatings. It is also ideal for professionals in the security, automotive, space and other industries who need an understanding of the topic. - Provides thorough review of applications of optical coatings including laser components, solar cells, glazing, displays and lighting - One-stop reference that addresses deposition techniques, properties, and applications of optical thin films and coatings - Novel methods, suggestions for analysis, and applications makes this a valuable resource for experts in the field as well

Download or read book Handbook of Greener Synthesis of Nanomaterials and Compounds written by Boris Kharisov and published by Elsevier. This book was released on 2021-04-07 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern techniques to produce nanoparticles, nanomaterials, and nanocomposites are based on approaches that frequently involve high costs, inefficiencies, and negative environmental impacts. As such, there has been a real drive to develop and apply approaches that are more efficient and benign. The Handbook of Greener Synthesis of Nanomaterials and Compounds provides a comprehensive review of developments in this field, combining foundational green and nano-chemistry with the key information researchers need to assess, select and apply the most appropriate green synthesis approaches to their own work. Volume 2: Synthesis at the Macroscale and Nanoscale explores synthesis at different scales. Beginning with a selection of chapters discussing a range of macroscale topics, the book goes on to explore such important areas as metal nanoparticle synthesis, biogenic synthesis, and synthesis of enzymes. Further chapters explore the role of Metal Organic Frameworks in greener synthesis, synthesis from renewable sources, and impacts of nanomaterials synthesized by greener methods. - Discusses the synthesis of widely different groups of chemical compounds and distinct materials - Reviews synthesis at both the macro and nanoscales, including information on metal-organic frameworks, carbon dots and ionic liquids - Provides examples of applications to support learning and guide implementation of theory in practice

Download or read book Transparent Conductive Zinc Oxide written by Klaus Ellmer and published by Springer Science & Business Media. This book was released on 2007-12-29 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide (ZnO) belongs to the class of transparent conducting oxides that can be used as transparent electrodes in electronic devices or heated windows. In this book the material properties of, the deposition technologies for, and applications of zinc oxide in thin film solar cells are described in a comprehensive manner. Structural, morphological, optical and electronic properties of ZnO are treated in this review.

Download or read book Synthesis and Characterization of Transparent Conductive Oxide written by Sandeep Desai and published by . This book was released on 2018-11-03 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: