Download or read book Applications of Polymers written by Raymond Seymour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural polymers, such as proteins, starch, cellulose, hevea rubber, and gum which have been available for centuries, have been applied as materials for food, leather, sizings, fibers, structures, waterproofing, and coatings. During the past century, the use of both natural and syn thetic polymers has been expanded to include more intricate applications, such as membranes, foams, medicinals, conductors, insulators, fibers, films, packaging and applications requiring high modulus at elevated temperatures. The topics in this symposium which are summarized in this book are illustrative of some of the myriad applications of these ubiquitous mater ials. As stated in forecast in the last chapter in this book, it is cer tain that revolutionary applications of polymers will occur during the next decades. Hopefully, information presented in other chapters in this book will catalyze some of these anticipated applications. It is appropriate that these reports were presented at an American Chemical Society Polymer Science and Engineering Division Award Symposium honoring Dr. O.A. Battista who has gratifying to note that Phillips Pet roleum Company, which has paved the way in applications of many new poly mers, is the sponsor of this important award. We are all cheerfully expressing our thanks to this corporate spon sor and to Distinguished Professor Raymond B. Seymour of the University of Southern Mississippi who served as the organizer of this symposium and editor of this important book.

Download or read book Catalyst Separation Recovery and Recycling written by David J. Cole-Hamilton and published by Springer Science & Business Media. This book was released on 2006-01-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at new ways of tackling the problem of separating reaction products from homogeneous catalytic solutions. The new processes involve low leaching supported catalysts, soluble supports such as polymers and dendrimers and unusual solvents such as water, fluorinated organics, ionic liquids and supercritical fluids. The advantages of the different possibilities are discussed alongside suggestions for further research that will be required for commercialisation. Unlike other books, in addition to the chemistry involved, the book looks at the process design that would be required to bring the new approaches to fruition. Comparisons are given with existing processes that have already been successfully applied and examples are given where these approaches are not suitable. The book includes: - New processes for the separation of products from solutions containing homogeneous catalysts - Catalysts on insoluble or soluble supports – fixed bed catalysts - continuous flow or ultrafiltration - Biphasic systems: water - organic, fluorous - organic, ionic liquid – organic, supercritical fluids (monophasic or biphasic with water, organic or ionic liquid) - Comparisons with current processes involving atmospheric or low temperature distillation - Consideration of Chemistry and Process Design - Advantages and disadvantages of each process exposed - Consideration of what else is need for commercialisation

Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.

Download or read book Catalytic Oxidations with Hydrogen Peroxide as Oxidant written by G. Strukul and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen peroxide is a chemical that is becoming increasingly fashionable as an oxidant, both in industry and in academia and whose production is expected to increase significantly in the next few years. This growth in interest is largely due to environmental considerations related to the clean nature of hydrogen peroxide as an oxidant, its by-product being only water. To date this chemical has largely been employed as a non-selective oxidant in operations like the bleaching of paper, cellulose and textiles, or in the formulation of detergents, and only to a minimal extent in the manufacture of organic chemicals. This book has been organized to cover the different aspects of the chemistry of hydrogen peroxide. The various chapters into which the book is divided have been written critically by the authors with the general aim of stimulating new ideas and emphasizing those aspects that are likely to lead to new developments in organic synthesis in the coming future.

Download or read book Nanostructured Catalysts written by Susannah L. Scott and published by Springer Science & Business Media. This book was released on 2008-04-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recent advent of nanotechnology, research and development in the area of nanostructured materials has gained unprecedented prominence. Novel materials with potentially exciting new applications are being discovered at a much higher rate than ever before. Innovative tools to fabricate, manipulate, characterize and evaluate such materials are being developed and expanded. To keep pace with this extremely rapid growth, it is necessary to take a breath from time to time, to critically assess the current knowledge and provide thoughts for future developments. This book represents one of these moments, as a number of prominent scientists in nanostructured materials join forces to provide insightful reviews of their areas of expertise, thus offering an overall picture of the state-- the art of the field. Nanostructured materials designate an increasing number of materials with designed shapes, surfaces, structures, pore systems, etc. Nanostructured materials with modified surfaces include those whose surfaces have been altered via such techniques as grafting and tethering of organic or organometallic species, or through various deposition procedures including electro, electroless and vapor deposition, or simple adsorption. These materials find important applications in catalysis, separation and environmental remediation. Materials with patterned surfaces, which are essential for the optoelectronics industry, constitute another important class of surface-modified nanostructured materials. Other materials are considered nanostructured because of their composition and internal organization.

Download or read book Asymmetric Synthesis of Three Membered Rings written by Hélène Pellissier and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first handbook to focus on the asymmetric synthesis of different types of three-membered rings. The outstanding and experienced authors have an excellent international reputation and cover cyclopropanes, epoxides and aziridines as well as chiral oxaziridines in equal measure. To this end, they describe in detail different synthetic approaches starting with chiral substrates as well as the application of chiral metal- or organocatalysts. Furthermore, methods for the kinetic resolution of initially racemic products are treated alongside recent advances and novel developments in established techniques for the synthesis of three-membered rings. With its structured composition this is of high interest to scientists in methodological and natural product synthesis as well as those in industrial and pharmaceutical chemistry.

Download or read book Green Chemistry and Catalysis written by R. A. Sheldon and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to focus on catalytic processes from the viewpoint of green chemistry presents every important aspect: · Numerous catalytic reductions and oxidations methods · Solid-acid and solid-base catalysis · C-C bond formation reactions · Biocatalysis · Asymmetric catalysis · Novel reaction media like e.g. ionic liquids, supercritical CO2 · Renewable raw materials Written by Roger A. Sheldon -- without doubt one of the leaders in the field with much experience in academia and industry -- and his co-workers, the result is a unified whole, an indispensable source for every scientist looking to improve catalytic reactions, whether in the college or company lab.

Download or read book Comprehensive Asymmetric Catalysis written by Eric N. Jacobsen and published by Springer Science & Business Media. This book was released on 2003-09-22 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first supplement to the three volume reference work "Comprehensive Asymmetric Catalysis" critically reviews new developments to the hottest topics in the field written by recognised experts. Eleven chapters which are already in the major reference work have been supplemented and additionally five new chapters have been included. Thus the state-of-the art in this area is now re-established. Together with the basic three volume book set this supplement is not only the principal reference source for synthetic organic chemists, but also for all scientific researchers who use chiral compounds in their work (for example, in biochemical investigations and molecular medicine) as well as for pharmaceutical chemists and other industrial researchers who prepare chiral compounds.

Download or read book Frontiers of Green Catalytic Selective Oxidations written by Konstantin P. Bryliakov and published by Springer. This book was released on 2020-10-15 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for novel efficient and environmentally sustainable chemo, regio- and stereoselective catalyst systems for the oxidation of organic substrates is continuously growing in line with toughening economic and environmental constraints. This book addresses these issues; it consists of eleven chapters written by world-recognized experts in green and sustainable oxidation catalysis. The most urgent and challenging topics, in the judgment of the editor, such as green asymmetric epoxidations, sulfoxidatiuons, C–H oxidations; oxidation catalysis by polyoxometalates and oxidations in non-conventional solvents, etc. have been critically reviewed in this book. Both fundamental aspects, such as catalysts design, catalytic properties, nature of catalytically active sites and reaction mechanisms, and practical outlook of the oxidations have been addressed by the authors. The book appeals to a broad readership, particularly graduate students, employees of universities and research organizations, and industrial researchers, particularly those working in the areas of homogeneous oxidation catalysis, asymmetric synthesis, organocatalysis, sustainable catalytic processes and green chemistry, mechanisms of catalytic reactions, synthesis of bioactive compounds, biomimetic chemistry, etc. Konstantin Bryliakov is Leading Researcher at the Boreskov Institute of Catalysis. In 2016, he was elected Honorary Professor of the Russian Academy of Sciences.

Download or read book Photocatalysis written by Dionysios D Dionysiou and published by Royal Society of Chemistry. This book was released on 2016-03-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: From environmental remediation to alternative fuels, this book explores the numerous important applications of photocatalysis. The book covers topics such as the photocatalytic processes in the treatment of water and air; the fundamentals of solar photocatalysis; the challenges involved in developing self-cleaning photocatalytic materials; photocatalytic hydrogen generation; photocatalysts in the synthesis of chemicals; and photocatalysis in food packaging and biomedical and medical applications. The book also critically discusses concepts for the future of photocatalysis, providing a fascinating insight for researchers. Together with Photocatalysis: Fundamentals and Perspectives, these volumes provide a complete overview to photocatalysis.

Download or read book Polymeric Reagents and Catalysts written by Warren T. Ford and published by . This book was released on 1986 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines recent advances in the use of polymeric reagents and catalysts with a special emphasis on new compounds, synthetic methods, and industrial processes. Brings these advances to the attention of those who are involved in organic synthesis and desire a more thorough understanding of polymers and polymeric reagents. Contains comprehensive chapters devoted to polymeric oxidizing agents, Wittig reagents, and synthesis of cross-linked polymeric templates for chiral recognition. Presents opportunities for invention and use of many new polymeric reagents and catalysts.

Download or read book Handbook of Commercial Catalysts written by Howard F. Rase and published by CRC Press. This book was released on 2016-04-05 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the advances in understanding the phenomena that occur on a catalyst surface, much of the successful catalyst development and use continues to be half science and half art. The art resides in the practical knowledge of experts in the development and use of commercial catalysts-it comes with experience. Now the background needed to nurture t

Download or read book Handbook of Maleic Anhydride Based Materials written by Osama M. Musa and published by Springer. This book was released on 2016-09-22 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on syntheses and properties, production processes, and applications of maleic anhydride and maleic anhydride derived products – all in one text. This handbook provides a comprehensive overview of maleic anhydride chemistry and applications from the professional perspective. With chapters written by leading R&D scientists from the chemical industry, and edited by the Vice President and ASI Technology Chief at Ashland Specialty Ingredients (ASI), Dr. Osama M. Musa, readers will find a unique perspective and summary of the latest advancements in the field of maleic anhydride science. Maleic anhydride is produced industrially on large scale (10E3 kt/annum). Its rich chemistry makes it an important raw material for numerous products and processes (e.g. for applications in polymers and coatings), many of which are covered in this handbook for the first time in a comprehensive manner. The broad scope spans topics ranging from production techniques (including topics such as processes, catalysis, trouble-shooting), synthesis and properties of small and polymeric maleic anhydride based compounds (focusing on industrially relevant compounds as well as emerging areas of importance) and in-depth and broad discussions of commercial maleic anhydride based applications.

Download or read book Supported Metal Complexes written by F.R. Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now IS years since the first patents in polymer supported metal complex catalysts were taken out. In the early days ion-exchange resins were used to support ionic metal complexes. Soon covalent links were developed, and after an initially slow start there was a period of explosive growth in the mid to late 1970s during which virtually every homogeneous metal complex catalyst ever reported was also studied bound to a support. Both polymers and inorganic oxides were studied as supports, although the great preponderance of workers studied polymeric supports, and of these polystyrene was by far the commonest used. This period served to show that by very careful design polymer-supported metal complex catalysts could have specific advantages over homogeneous metal complex catalysts. However the subject was a complicated one. Merely immobilising a successful metal complex catalyst to a functionalised support rarely yielded other than an inferior version of the catalyst. Amongst the many discouraging results of the 1970s, there were more than enough results that were sufficiently encouraging to demonstrate that, by careful design, supported metal complex catalysts could be prepared in which both the metal complex and the support combined together to produce an active catalyst which, due to the combination of support and complex, had advantages of activity, selectivity and specificity not found in homogeneous catalysts. Thus a new generation of catalysts was being developed.

Download or read book The Chemical Reactor from Laboratory to Industrial Plant written by Elio Santacesaria and published by Springer. This book was released on 2018-11-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate textbook, written by a former lecturer, addresses industrial chemical reaction topics, focusing on the commercial-scale exploitation of chemical reactions. It introduces students to the concepts behind the successful design and operation of chemical reactors, with an emphasis on qualitative arguments, simple design methods, graphical procedures, and frequent comparison of capabilities of the major reactor types. It starts by discussing simple ideas before moving on to more advanced concepts with the support of numerous case studies. Many simple and advanced exercises are present in each chapter and the detailed MATLAB code for their solution is available to the reader as supplementary material on Springer website. It is written for MSc chemical engineering students and novice researchers working in industrial laboratories.

Download or read book Adventures of a Chemist Collector written by Alfred Bader and published by Weidenfeld & Nicolson. This book was released on 1995-01-01 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Born in Vienna, Alfred Bader fled to England at the age of fourteen, ten months before the outbreak of World War II. Although a Jewish refugee from the Nazis, he was interned in 1940, along with other 'enemy aliens', and sent to a Canadian prisoner-of-war camp." "Obtaining his release in 1941, he was accepted at Queen's University in Kingston, Ontario, where he studied engineering chemistry. There followed a fellowship in organic chemistry at Harvard. He worked in Milwaukee as a research chemist for the Pittsburgh Plate Glass Company and in 1951 co-founded Aldrich, which today, as Sigma-Aldrich, is the world's largest supplier of research chemicals." "He spent forty years building Aldrich's distinctive reputation, and the extraordinary story of how he was eventually thrown off the board of Sigma-Aldrich will be of key interest to people in the chemical industry worldwide, as well as to students of business." "After leaving Sigma-Aldrich, he continued a fruitful career as an art collector and dealer, and he has some very pertinent and amusing things to say about his experiences in the art world."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved

Download or read book Inorganic and Organometallic Transition Metal Complexes with Biological Molecules and Living Cells written by Kenneth Kam-Wing Lo and published by Academic Press. This book was released on 2016-12-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inorganic and Organometallic Transition Metal Complexes with Biological Molecules and Living Cells provides a complete overview of this important research area that is perfect for both newcomers and expert researchers in the field. Through concise chapters written and edited by esteemed experts, this book brings together a comprehensive treatment of the area previously only available through scattered, lengthy review articles in the literature. Advanced topics of research are covered, with particular focus on recent advances in the biological applications of transition metal complexes, including inorganic medicine, enzyme inhibitors, antiparasital agents, and biological imaging reagents. - Geared toward researchers and students who seek an introductory overview of the field, as well as researchers working in advanced areas - Focuses on the interactions of inorganic and organometallic transition metal complexes with biological molecules and live cells - Foscuses on the fundamentals and their potential therapeutic and diagnostic applications - Covers recent biological applications of transition metal complexes, such as anticancer drugs, enzyme inhibitors, bioconjugation agents, chemical biology tools, and bioimaging reagents