Download or read book Synthesis of Single walled Carbon Nanotubes and Their Electro thermal and Opto electronic Properties written by David Abraham Mann and published by . This book was released on 2006 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Nanomaterials written by Yury Gogotsi and published by CRC Press. This book was released on 2013-10-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on synthesis, properties, and applications of carbon nanomaterials. With novel materials, such as graphene (atomically flat carbon) or carbon onions (carbon nanospheres), the family of carbon nanomaterials is rapidly growing. This book provides a state-of-the-art overview and in-depth analysis of the most important ca

Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.

Download or read book Single Walled Carbon Nanotubes written by Yan Li and published by Springer. This book was released on 2019-05-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry Collections presents critical reviews from the journal Topics in Current Chemistry organized in topical volumes. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field.

Download or read book Springer Handbook of Nanomaterials written by Robert Vajtai and published by Springer Science & Business Media. This book was released on 2013-08-20 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Nanomaterials covers the description of materials which have dimension on the "nanoscale". The description of the nanomaterials in this Handbook follows the thorough but concise explanation of the synergy of structure, properties, processing and applications of the given material. The Handbook mainly describes materials in their solid phase; exceptions might be e.g. small sized liquid aerosols or gas bubbles in liquids. The materials are organized by their dimensionality. Zero dimensional structures collect clusters, nanoparticles and quantum dots, one dimensional are nanowires and nanotubes, while two dimensional are represented by thin films and surfaces. The chapters in these larger topics are written on a specific materials and dimensionality combination, e.g. ceramic nanowires. Chapters are authored by well-established and well-known scientists of the particular field. They have measurable part of publications and an important role in establishing new knowledge of the particular field.

Download or read book Single Walled Carbon Nanotubes written by Melorina Dolafi Rezaee and published by American Chemical Society. This book was released on 2023-08-01 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single-walled carbon nanotubes (SWCNTs) are cylindrical one-dimensional nanomaterials made of single-layered graphene sheets. They possess unique properties because of their specific structure. Due to their distinct electronic structure and impressive thermal, mechanical, and optical properties, SWCNTs have great applications in biomedicine, energy storage, nanomechanical devices, etc. So far, many methods have been developed to synthesize SWCNTs. Despite the great achievements in the synthesis and applications of SWCNTs in the past few decades, many challenges remain. This primer will equip the reader with a foundational understanding of the growth mechanisms of SWCNTs and the advantages and disadvantages of the process and growth conditions of the various techniques. The reader will also learn how to relate the properties and structure of these materials to their specific functionality in the desired application.

Download or read book Synthesis and Applications of Nanocarbons written by Jean-Charles Arnault and published by John Wiley & Sons. This book was released on 2020-09-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial overview of the cutting-edge in nanocarbon research and applications In Synthesis and Applications of Nanocarbons, the distinguished authors have set out to discuss fundamental topics, synthetic approaches, materials challenges, and various applications of this rapidly developing technology. Nanocarbons have recently emerged as a promising material for chemical, energy, environmental, and medical applications because of their unique chemical properties and their rich surface chemistries. This book is the latest entry in the Wiley book series Nanocarbon Chemistry and Interfaces and seeks to comprehensively address many of the newly surfacing areas of controversy and development in the field. This book introduces foundational concepts in nanocarbon technology, hybrids, and applications, while also covering the most recent and cutting-edge developments in this area of study. Synthesis and Applications of Nanocarbons addresses new discoveries in the field, including: · Nanodiamonds · Onion-like carbons · Carbon nanotubes · Fullerenes · Carbon dots · Carbon fibers · Graphene · Aerographite This book provides a transversal view of the various nanocarbon materials and hybrids and helps to share knowledge between the communities of each material and hybrid type.

Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.

Download or read book Electronic Properties of Carbon Nanotubes written by Leroy Sidney and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are tubular cylinders of carbon atoms that have extraordinary mechanical, electrical, thermal, optical and chemical properties. CNTs typically have diameters ranging from 1 nanometer (nm) up to 50 nma nanometer is one thousand millionth of a meter. Typical CNT lengths are several micronsseveral thousand nanometers long; by contrast, Nanocomp's produced fibers are measured in millimetersthousands of times longer than all other commercially produced CNTs. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. In the powdery format offered by all CNT producers (but for NTI), applications are limited to the properties possible by this form factore.g. additive active ingredients in semiconductors, liquid crystal displays (LCDs), sensors, and other uses in which these powders add some level of functional performance. Due to its fiber length and its form factors, NTI delivers strength and conductivity unlike any other commercial CNT producer, and so can address a much broader array of applications for which its material rivals copper and aluminum in conductivity, and steel, aluminum, carbon fibers and glass composites where strength and lightweight matter. Carbon nanotubes have been a subject of exhaustive research for a wide range of applications. The purpose of this book entitled Properties of Carbon Nanotubes is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. This book discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Eventually, the book follows a significant amount of work in the industry applications of carbon nanotubes.

Download or read book Carbon Nanotube polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2013 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to summarize the basic chemical aspects for obtaining multifunctional carbon nanotube-based polymer composites, but also to highlight some of the most remarkable advances that occurred in the field during the last recent years.

Download or read book Carbon Nanotubes for Biomedical Applications written by Rüdiger Klingeler and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the potential of multi-functional carbon nanotubes for biomedical applications. It combines contributions from chemistry, physics, biology, engineering, and medicine. The complete overview of the state-of-the-art addresses different synthesis and biofunctionalisation routes and shows the structural and magnetic properties of nanotubes relevant to biomedical applications. Particular emphasis is put on the interaction of carbon nanotubes with biological environments, i.e. toxicity, biocompatibility, cellular uptake, intracellular distribution, interaction with the immune system and environmental impact. The insertion of NMR-active substances allows diagnostic usage as markers and sensors, e.g. for imaging and contactless local temperature sensing. The potential of nanotubes for therapeutic applications is highlighted by studies on chemotherapeutic drug filling and release, targeting and magnetic hyperthermia studies for anti-cancer treatment at the cellular level.

Download or read book Applied Physics of Carbon Nanotubes written by Slava V. Rotkin and published by Springer Science & Business Media. This book was released on 2005-10-14 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the state-of-the-art in fundamental, applied and device physics of nanotubes, including fabrication, manipulation and characterization for device applications; optics of nanotubes; transport and electromechanical devices and fundamentals of theory for applications. This information is critical to the field of nanoscience since nanotubes have the potential to become a very significant electronic material for decades to come. The book will benefit all all readers interested in the application of nanotubes, either in their theoretical foundations or in newly developed characterization tools that may enable practical device fabrication.

Download or read book Carbon Nanotubes and Their Applications written by Qing Zhang and published by CRC Press. This book was released on 2012-04-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the current status of research and development activities of CNTs in nanodevices, nanomaterials, or nanofabrication. This book presents 15 state-of-the-art review articles that cover CNT synthesis technologies for growing highly orientated CNTs, chirality-pure CNTs and CNTs at a large throughput and low cost, CNT assembly techniques, CNT sorting and separation processes, CNT functionalization engineering for more functionalities, CNT fundamental properties and their practical/potential electrical, electronic, optical, mechanical, chemical and biological applications.

Download or read book Physical Properties Of Carbon Nanotubes written by G Dresselhaus and published by World Scientific. This book was released on 1998-07-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introductory textbook for graduate students and researchers from various fields of science who wish to learn about carbon nanotubes. The field is still at an early stage, and progress continues at a rapid rate. This book focuses on the basic principles behind the physical properties and gives the background necessary to understand the recent developments. Some useful computational source codes which generate coordinates for carbon nanotubes are also included in the appendix.

Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.

Download or read book Carbon Nanotube Science written by Peter J. F. Harris and published by Cambridge University Press. This book was released on 2009-03-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of all of the important aspects of carbon nanotube research, including synthesis, properties and potential applications.

Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. - Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery - Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines - High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data