Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Light Scattering from Polymer Solutions and Nanoparticle Dispersions written by Wolfgang Schärtl and published by Springer Science & Business Media. This book was released on 2007-08-13 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light scattering is a very powerful method for characterizing the structure of polymers and nanoparticles in solution. As part of the Springer Laboratory series, this book provides a simple-to-read and illustrative textbook probing the seemingly very complicated topic of light scattering from polymers and nanoparticles in dilute solution, and goes further to cover some of the latest technical developments in experimental light scattering.
Download or read book Structure Property Relationships in Polymers written by Charles E. Carraher Jr. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first concern of scientists who are interested in synthetic polymers has always been, and still is: How are they synthesized? But right after this comes the question: What have I made, and for what is it good? This leads to the important topic of the structure-property relations to which this book is devoted. Polymers are very large and very complicated systems; their character ization has to begin with the chemical composition, configuration, and con formation of the individual molecule. The first chapter is devoted to this broad objective. The immediate physical consequences, discussed in the second chapter, form the basis for the physical nature of polymers: the supermolecular interactions and arrangements of the individual macromolecules. The third chapter deals with the important question: How are these chemical and physical structures experimentally determined? The existing methods for polymer characterization are enumerated and discussed in this chapter. The following chapters go into more detail. For most applications-textiles, films, molded or extruded objects of all kinds-the mechanical and the thermal behaviors of polymers are of pre ponderant importance, followed by optical and electric properties. Chapters 4 through 9 describe how such properties are rooted in and dependent on the chemical structure. More-detailed considerations are given to certain particularly important and critical properties such as the solubility and permeability of polymeric systems. Macromolecules are not always the final goal of the chemist-they may act as intermediates, reactants, or catalysts. This topic is presented in Chapters 10 and 11.
Download or read book Biopolymers from Renewable Resources written by David L. Kaplan and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers from Renewable Resources is a compilation of information on the diverse and useful polymers derived from agricultural, animal, and microbial sources. The volume provides insight into the diversity of polymers obtained directly from, or derived from, renewable resources. The beneficial aspects of utilizing polymers from renewable resources, when considering synthesis, pro cessing, disposal, biodegradability, and overall material life-cycle issues, suggests that this will continue to be an important and growing area of interest. The individual chapters provide information on synthesis, processing and properties for a variety of polyamides, polysaccharides, polyesters and polyphenols. The reader will have a single volume that provides a resource from which to gain initial insights into this diverse field and from which key references and contacts can be drawn. Aspects of biology, biotechnology, polymer synthesis, polymer processing and engineering, mechanical properties and biophysics are addressed to varying degrees for the specific biopolymers. The volume can be used as a reference book or as a teaching text. At the more practical level, the range of important materials derived from renewable resources is both extensive and impressive. Gels, additives, fibers, coatings and films are generated from a variety of the biopolymers reviewed in this volume. These polymers are used in commodity materials in our everyday lives, as well as in specialty products.
Download or read book Polyelectrolytes and Nanoparticles written by Joachim Koetz and published by Springer Science & Business Media. This book was released on 2007-02-20 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This lab manual guides chemists through demonstrations of synergistic effects between polyelectrolytes and nanoparticles. After a short introduction into the field of polyelectrolytes and polyelectrolyte characterization, the book discusses the role of polyelectrolytes in the process of nanoparticle formation. The book also explains methods for characterization of the polyelectrolyte-modified nanoparticles.
Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.
Download or read book Plastic Packaging written by Otto G. Piringer and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics are the most important class of packaging materials. This successful handbook, now in its second edition, covers all important aspects of plastic packaging and the interdisciplinary knowledge needed by food chemists, pharmaceutical chemists, food technologists, materials scientists, process engineers, and product developers alike. This is an indispensable resource in the search for the optimal plastic packaging. Materials characteristics, additives and their effects, mass transport phenomena, quality assurance, and recent regulatory requirements from FDA and European Commission are covered in detail with ample data.
Download or read book Atlas of Plastics Additives written by Dietrich O. Hummel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must for experts in industry, this book describes the application of vibrational (FTIR, UV, Raman) and mass spectrometries and other instrumental techniques for identification and structure elucidation of plastics additives. Numerous tables and figures compress the state of the art.
Download or read book Macromolecular Metal Carboxylates and Their Nanocomposites written by Anatolii D. Pomogailo and published by Springer Science & Business Media. This book was released on 2010-09-02 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data on the synthesis and physicochemical studies of salts of mono- or dibasic unsaturated carboxylic acids and macromolecular metal carboxylates are generalised and described systematically in this monograph. The structures and properties of the COO group in various compounds and characteristic features of the structures of carboxylate are analysed. The main routes and kinetics of polymerisation transformations of unsaturated metal carboxylates are considered. The attention is focused on the effect of the metal ion on the monomer reactivity and the polymer morphology and structure. The possibility of stereochemical control of radical polymerisation of unsaturated metal carboxylates is demonstrated. The electronic, magnetic, optical, absorption and thermal properties of metal (co)polymers and nanocomposites and their main applications are also considered.
Download or read book Metal Nanoparticles in Microbiology written by Mahendra Rai and published by Springer Science & Business Media. This book was released on 2011-04-02 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following an introduction to biogenic metal nanoparticles, this book presents how they can be biosynthesized using bacteria, fungi and yeast, as well as their potential applications in biomedicine. It is shown that the synthesis of nanoparticles using microbes is eco-friendly and results in reproducible metal nanoparticles of well-defined sizes, shapes and structures. This biotechnological approach based on the process of biomineralization exploits the effectiveness and flexibility of biological systems. Chapters include practical protocols for microbial synthesis of nanoparticles and microbial screening methods for isolating a specific nanoparticle producer as well as reviews on process optimization, industrial scale production, biomolecule-nanoparticle interactions, magnetosomes, silver nanoparticles and their numerous applications in medicine, and the application of gold nanoparticles in developing sensitive biosensors.
Download or read book A Guide to the Preventive Conservation of Photograph Collections written by Bertrand Lavédrine and published by Getty Publications. This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A resource for the photographic conservator, conservation scientist, curator, as well as professional collector, this volume synthesizes both the masses of research that has been completed to date and the international standards that have been established on the subject.
Download or read book Nano Antimicrobials written by Nicola Cioffi and published by Springer Science & Business Media. This book was released on 2012-02-26 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a high demand for antimicrobials for the treatment of new and emerging microbial diseases. In particular, microbes developing multidrug resistance have created a pressing need to search for a new generation of antimicrobial agents, which are effective, safe and can be used for the cure of multidrug-resistant microbial infections. Nano-antimicrobials offer effective solutions for these challenges; the details of these new technologies are presented here. The book includes chapters by an international team of experts. Chemical, physical, electrochemical, photochemical and mechanical methods of synthesis are covered. Moreover, biological synthesis using microbes, an option that is both eco-friendly and economically viable, is presented. The antimicrobial potential of different nanoparticles is also covered, bioactivity mechanisms are elaborated on, and several applications are reviewed in separate sections. Lastly, the toxicology of nano-antimicrobials is briefly assessed.
Download or read book Metallopolymer Nanocomposites written by A.D. Pomogailo and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and analyzes the essential data on nanoscale metal clusters dispersed in, or chemically bonded with polymers. Special attention is paid to the in situ synthesis of the nanocomposites, their chemical interactions, and the size and distribution of the particles in the polymer matrix. Numerous novel nanocomposites are described with regard to their mechanical, electrophysical, optical, magnetic, catalytic and biological properties. Their applications, present and future, are outlined.
Download or read book Plastics for Corrosion Inhibition written by V.A. Goldade and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key problems of failure-free operation of machinery is prevention of corrosion. The global scale of modern production makes this problem even more critical. At the beginning of the 21st century industrial contami- tion and the corrosion-active nature of the environment reached a level such that corrosive damage of materials became commensurate with their prod- tion volume and expenditure on anticorrosion protection of machines became comparable with investments in basic production. Anticorrosion techniques changed from being an auxiliary service to industrial enterprises into a dev- oping, scienti?cally intensive and generously ?nanced branch of production. Polymers occupy a very speci?c place amongst anticorrosion techniques. Polymers combine good chemical resistance with impermeability to di?- ent media and unusual deformation characteristics. The main principle of their application as anticorrosion means is the creation of a tight barrier that insulates metal machine parts or constructions from corrosion agents. The advantages of polymers allow the creation of such a barrier at minimal cost,providingprotectionoftheworkingmachinesfromcorrosion,combining their manufacture with preservation and decreasing the cost of anticorrosion. This is one of the main reasons why world production of polymer materials increased by almost 50% in the past decade.
Download or read book Additives for Coatings written by Johan Bieleman and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: No doubt: A perfect coating has to look brilliant! But other properties of coatings are also most important. Coatings have to be durable, tough and easily applicable. Additives are the key to success in achieving these characteristics, even though the amounts used in coating formulations are small. It is not trivial at all to select the best additives. In practice, many series of tests are often necessary, and the results do not explain, why a certain additive improves the quality of a coating and another one impairs the coating. This book is dedicated to developers and applicants of coatings working in research or production, and it is aimed at providing a manual for their daily work. It will answer the following questions: How do the most important groups of additives act? Which effects can be be achieved by their addition? Scientific theories are linked to practical applications. Emphasis is put on the optical aspects that are most important for the applications in practice. This book is a milestone in quality assurance in the complete field of coatings!
Download or read book New Trends in Fluorescence Spectroscopy written by Bernard Valeur and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume in the new Springer Series on Fluorescence brings together fundamental and applied research from this highly interdisciplinary and field, ranging from chemistry and physics to biology and medicine. Special attention is given to supramolecular systems, sensor applications, confocal microscopy and protein-protein interactions. This carefully edited collection of articles is an invaluable tool for practitioners and novices.
Download or read book Lubricating Grease Manufacturing Technology written by Yu.L. Ishchuk and published by New Age International. This book was released on 2005 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating Grease (Or Grease, To Use A Short Name), Leaving Aside Synthetic Grease For The Moment, Is Arguably Amongst The Highest Value Added Petroleum Products. Lubricating Greases Play Very Crucial Role In The Performance Of Automobiles, Industrial Machinery And Appliances Which Almost Every One Of Us Use, Rely Upon Or Work With Everyday. Lubricating Greases Account For About 5% Of The Global Consumption Of The Lubricants, Which In Turn Account For About 1% Of All Petroleum Products. Thus, In Volume Terms, Lubricating Greases Constitute A Relatively Small, Specialized Industry. Nonetheless, The Importance Of Lubricating Greases Can Not Be Overemphasized. The World Would Quite Literally Grind To A Halt Without Lubricating Greases.There Are Not Many Books On Lubricating Greases. Even The Very Few Books That Are Available In English Language, Largely Encapsulate The Work And Knowledge Developed In North America And West Europe. Significant Scientific And Technological Advancements Were Achieved In The Erstwhile East Bloc Countries During The Second Half Of The 20Th Century. However, It Is Only Over The Last Two Decades That Those Outside The Erstwhile East Bloc Have Been Getting Glimpses Of The Prolific Work Done By Scientists And Technologists In That Part Of The World. This Book Endeavours To Further This Process In A Small Way.
