Download or read book Synthesis and Microstructure of Electrodeposited and Sputtered Nanotwinned Face centered cubic Metals written by and published by . This book was released on 2016 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The remarkable properties of nanotwinned (NT) face-centered-cubic (fcc) metals arise directly from twin boundaries, the structures of which can be initially determined by growth twinning during the deposition process. Understanding the synthesis process and its relation to the resulting microstructure, and ultimately to material properties, is key to understanding and utilizing these materials. This article presents recent studies on electrodeposition and sputtering methods that produce a high density of nanoscale growth twins in fcc metals. Nanoscale growth twins tend to form spontaneously in monolithic and alloyed fcc metals with lower stacking-fault energies, while engineered approaches are necessary for fcc metals with higher stacking-fault energies. As a result, growth defects and other microstructural features that influence nanotwin behavior and stability are introduced here, and future challenges in fabricating NT materials are highlighted.
Download or read book Heterostructured Materials written by Xiaolei Wu and published by CRC Press. This book was released on 2021-11-24 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterostructured (HS) materials represent an emerging class of materials that are expected to become a major research field for the communities of materials, mechanics, and physics in the next couple of decades. One of the biggest advantages of HS materials is that they can be produced by large-scale industrial facilities and technologies and therefore can be commercialized without the scaling up and high-cost barriers that are often encountered by other advanced materials. This book collects recent papers on the progress in the field of HS materials, especially their fundamental physics. The papers are arranged in a sequence of chapters that will help new researchers entering the field to have a quick and comprehensive understanding of HS materials, including the fundamentals and recent progress in their processing, characterization, and properties.
Download or read book Imperfections in Crystalline Solids written by Wei Cai and published by Cambridge University Press. This book was released on 2016-09-15 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides students with a complete working knowledge of the properties of imperfections in crystalline solids. Readers will learn how to apply the fundamental principles of mechanics and thermodynamics to defect properties in materials science, gaining all the knowledge and tools needed to put this into practice in their own research. Beginning with an introduction to defects and a brief review of basic elasticity theory and statistical thermodynamics, the authors go on to guide the reader in a step-by-step way through point, line, and planar defects, with an emphasis on their structural, thermodynamic, and kinetic properties. Numerous end-of-chapter exercises enable students to put their knowledge into practice, and with solutions for instructors and MATLAB® programs available online, this is an essential text for advanced undergraduate and introductory graduate courses in crystal defects, as well as being ideal for self-study.
Download or read book Synfuels from Coal and the National Synfuels Production Program written by and published by . This book was released on 1981 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book THERMEC 2016 written by C. Sommitsch and published by Trans Tech Publications Ltd. This book was released on 2016-11-15 with total page 2720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9-th International Conference on Processing and Manufacturing of Advanced Materials THERMEC2016, which took place between May 29 and June 3, 2016 in Graz, Austria, under the co-sponsorship of The Minerals, Metals & Materials Society (TMS), USA. The Conference was also under the international auspices of professional organizations from Japan, Korea, France, Italy, The Netherlands, Germany, Brazil, Austria, India, and Canada. The Conference was intended to bring together the researchers and engineers/technologists working in different aspects of processing, fabrication, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, and smart/intelligent materials as well as the advanced characterisation techniques. In addition to the contributed papers, the conference committee included in the final program the invited presentations by active researchers from various countries in several topic areas covered at THERMEC2016.
Download or read book Cyclic Plasticity of Metals written by Hamid Jahed and published by Elsevier. This book was released on 2021-11-11 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. - Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading - Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components - Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions
Download or read book Self Organization During Friction written by German Fox-Rabinovich and published by CRC Press. This book was released on 2006-09-18 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: In our present era of nanoscience and nanotechnology, new materials are poised to take center stage in dramatically improving friction and wear behavior under extreme conditions. Compiled by two eminent experts, Self-Organization During Friction: Advanced Surface-Engineered Materials and Systems Design details the latest advances and developments i
Download or read book A Practical Guide to Rock Microstructure written by Ron H. Vernon and published by Cambridge University Press. This book was released on 2004-10-07 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock microstructures provide clues for the interpretation of rock history. A good understanding of the physical or structural relationships of minerals and rocks is essential for making the most of more detailed chemical and isotopic analyses of minerals. Ron Vernon discusses the basic processes responsible for the wide variety of microstructures in igneous, sedimentary, metamorphic and deformed rocks, using high-quality colour illustrations. He discusses potential complications of interpretation, emphasizing pitfalls, and focussing on the latest techniques and approaches. Opaque minerals (sulphides and oxides) are referred to where appropriate. The comprehensive list of relevant references will be useful for advanced students wishing to delve more deeply into problems of rock microstructure. Senior undergraduate and graduate students of mineralogy, petrology and structural geology will find this book essential reading, and it will also be of interest to students of materials science.
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties.One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying.With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.
Download or read book Handbook of Thin Film Materials Deposition and processing of thin films written by Hari Singh Nalwa and published by . This book was released on 2002 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol.1: Deposition and processing of thin films; Vol.2: Characterization and spectroscopy of thin films; Vol.3: Ferroelectric and dielectric thin films; Vol.4: Semiconductor and superconductor thin films; Vol.5: Nanomaterials and magnetic thin flims
Download or read book Advanced Nanoscale ULSI Interconnects Fundamentals and Applications written by Yosi Shacham-Diamand and published by Springer Science & Business Media. This book was released on 2009-09-19 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Advanced ULSI interconnects – fundamentals and applications we bring a comprehensive description of copper-based interconnect technology for ultra-lar- scale integration (ULSI) technology for integrated circuit (IC) application. In- grated circuit technology is the base for all modern electronics systems. You can ?nd electronics systems today everywhere: from toys and home appliances to a- planes and space shuttles. Electronics systems form the hardware that together with software are the bases of the modern information society. The rapid growth and vast exploitation of modern electronics system create a strong demand for new and improved electronic circuits as demonstrated by the amazing progress in the ?eld of ULSI technology. This progress is well described by the famous “Moore’s law” which states, in its most general form, that all the metrics that describe integrated circuit performance (e. g. , speed, number of devices, chip area) improve expon- tially as a function of time. For example, the number of components per chip d- bles every 18 months and the critical dimension on a chip has shrunk by 50% every 2 years on average in the last 30 years. This rapid growth in integrated circuits te- nology results in highly complex integrated circuits with an increasing number of interconnects on chips and between the chip and its package. The complexity of the interconnect network on chips involves an increasing number of metal lines per interconnect level, more interconnect levels, and at the same time a reduction in the interconnect line critical dimensions.
Download or read book Cobalt base Alloys for Biomedical Applications written by John A. Disegi and published by ASTM International. This book was released on 1999 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Though cobalt alloys are used in a variety of dental, neurological, and cardiovascular applications, most of the 17 papers focus on orthopedic applications, considering alloy design, processing variable, corrosion and fretting resistance, abrasion, and wear characterization. Almost all are concerned
Download or read book THERMEC 2013 written by B. Mishra and published by Trans Tech Publications Ltd. This book was released on 2014-05-23 with total page 2938 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from THERMEC 2013, 8th International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, December 2-6, 2013, Las Vegas, USA. The 470 papers are grouped as follows: Chapter 1: Al Alloys, Chapter 2: Mg Alloys (Prof Karl U. Kainer Symposium), Chapter 3: Ti Alloys/ Aerospace Structural Metallic Materials, Chapter 4: Steels, Chapter 5: TMP Microalloyed Steels (Prof. A. J. DeArdo Symposium), Chapter 6: High & Ultra High Temperature Materials, Chapter 7: Bio Materials, Chapter 8: Advanced Protective Coatings/Surface Engineering, Chapter 9: Composites (MMC, CMC)/ Nanocomposites/ Synthetic & Foams), Chapter 10: Interfaces & Grain Boundaries, Chapter 11: Fuel Cells, Hydrogen Storage Technologies, Batteries, Supercapacitors & Thermoelectric Materials, Chapter 12: Friction Stir Processing/Welding, Chapter 13: Materials Under Extreme Conditions, Chapter 14: Metallic Glasses/ Bulk Metallic Amorphous Materials, Chapter 15: Nanomaterials for Structural & Energy Applications, Chapter 16: Neutron Scattering & X-Ray Studies of Advanced Materials, Chapter 17: Modelling & Simulation, Chapter 18: Materials Performance, Chapter 19: Smart/Intelligent Materials & Processes, Chapter 20: Texture of Materials (Prof. G. Gottstein Symposium), Chapter 21: Ultra-Fine Grained Materials (Prof. T. G. Langdon Symposium), Chapter 22: Welding & Joining of Advanced and Special Materials
Download or read book 3D Microelectronic Packaging written by Yan Li and published by Springer. This book was released on 2016-10-29 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a comprehensive reference for graduate students and professionals in both academia and industry on the fundamentals, processing details, and applications of 3D microelectronic packaging, an industry trend for future microelectronic packages. Chapters written by experts cover the most recent research results and industry progress in the following areas: TSV, die processing, micro bumps, direct bonding, thermal compression bonding, advanced materials, heat dissipation, thermal management, thermal mechanical modeling, quality, reliability, fault isolation, and failure analysis of 3D microelectronic packages. Numerous images, tables, and didactic schematics are included throughout. This essential volume equips readers with an in-depth understanding of all aspects of 3D packaging, including packaging architecture, processing, thermal mechanical and moisture related reliability concerns, common failures, developing areas, and future challenges, providing insights into key areas for future research and development.
Download or read book The Structure of Metals and Alloys written by William Hume-Rothery and published by . This book was released on 1950 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Nanoelectrochemistry written by Mahmood Aliofkhazraei and published by Springer. This book was released on 2015-11-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book is devoted to different electrochemical aspects of nano materials. This comprehensive reference text is basically divided in 3 parts: electrochemical synthesis routes for nanosized materials, electrochemical properties of nano materials and electrochemical characterization methods for nanostructures. The Handbook is a reference work to chemists and materials scientists interested in the nano aspects of electrochemistry. The chapters are written by a number of international experts in the field and the content will assist members of both electrochemical and materials communities to keep abreast of developments in the field.
