Download or read book Synthesis and characterization of titania aerogels written by Lynetta K. Campbell and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growth And Characterization Of Semiconductor Nanostructure For Device Applications written by Dr. Jehova Jire L. Hmar and published by BFC Publications. This book was released on 2023-03-04 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to provide knowledge for students and learners in the field of nanoscale science and nanotechnology. Nanotechnology is design, fabrication and application of nanostructures or nanomaterials, and the fundamental understanding of the relationships between physical properties or phenomena and material dimensions. Nanotechnology deals with materials or structures in nanometer scales, typically ranging from subnanometers to several hundred nanometers. Nanotechnology is a new field or a new scientific domain. Similar to quantum mechanics, on nanometer scale, materials or structures may possess new physical properties or exhibit new physical phenomena. Nanotechnology has an extremely broad range of potential applications from nanoscale electronics and optics and therefore it requires formation of and contribution from multidisciplinary teams of physicists, chemists, materials scientists and engineers. The aim of this book “Growth and Characterization of Semiconductor Nanostructure for Device Applications” is to summarize the fundamentals and established techniques of synthesis, fabrication, characterization and applications of nanomaterials and nanostructures so as to provide readers a systematic and coherent picture about synthesis, fabrication and characterization of nanomaterials.
Download or read book Springer Handbook of Aerogels written by Michel A. Aegerter and published by Springer Nature. This book was released on 2023-10-01 with total page 1778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable handbook provides comprehensive coverage of the current state-of-the-art in inorganic, organic, and composite aerogels – from synthesis and characterization to cutting-edge applications and their potential market impact. Built upon Springer’s successful Aerogels Handbook published in 2011, this handbook features extensive revisions and timely updates, reflecting the changes in this fast-growing field. Aerogels are the lightest solids known to man. Up to 1000 times lighter than glass and with a density only four times that of air, they possess extraordinarily high thermal, electrical, and acoustic insulation properties, and boast numerous entries in Guinness World Records. Originally based on silica, R&D efforts have extended this class of materials to incorporate non-silicate inorganic oxides, natural and synthetic organic polymers, carbon, metal, and ceramic materials. Composite systems involving polymer-crosslinked aerogels and interpenetrating hybrid networks have been developed and exhibit remarkable mechanical strength and flexibility. Even more exotic aerogels based on clays, chalcogenides, phosphides, quantum dots, and biopolymers such as chitosan are opening new applications for the construction, transportation, energy, defense and healthcare industries. Applications in electronics, chemistry, mechanics, engineering, energy production and storage, sensors, medicine, nanotechnology, military and aerospace, oil and gas recovery, thermal insulation, and household uses are being developed. Readers of this fully updated and expanded edition will find an exhaustive source for all aerogel materials known today, their fabrication, upscaling aspects, physical and chemical properties, and the most recent advances towards applications and commercial use. This key reference is essential reading for a combined audience of graduate students, academic researchers, and industry professionals.
Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book The Sol Gel Handbook written by David Levy and published by John Wiley & Sons. This book was released on 2015-08-28 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Aerospace Materials Handbook written by Sam Zhang and published by CRC Press. This book was released on 2016-04-19 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether an airplane or a space shuttle, a flying machine requires advanced materials to provide a strong, lightweight body and a powerful engine that functions at high temperature. The Aerospace Materials Handbook examines these materials, covering traditional superalloys as well as more recently developed light alloys. Capturing state-of-the-art d
Download or read book Advances in Aerogel Composites for Environmental Remediation written by Aftab Aslam Parwaz Khan and published by Elsevier. This book was released on 2021-05-29 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Aerogel Composites for Environmental Remediation presents both contextual information aboutaerogels and details about their application in environmental remediation. A wide variety of aerogels are discussed, rangingfrom common to advanced and from natural to synthetic. By exploring ongoing research and developments in the environmentalremediation technologies using aerogel and its composites, this book addresses common day-to-day environmental problemsand presents solutions to the use of aerogel materials. The chapters discuss fabrication of various aerogel composites, alongwith their design and applications toward different environmental remediation technologies. Additionally, the properties andadvantages of aerogels are compared and contrasted to those of traditional materials. Given the consistent increase in environmental pollution, there is an urgent need to explore new materials for advances in remediationtechnology. Advances in Aerogel Composites for Environmental Remediation brings researchers and practitionersin the fields of environmental remediation, environmental science, and engineering to the forefront of remediation technologieswith a thorough breakdown of the benefits of and techniques relevant to aerogel composites. - Covers basic properties, unique properties, and fabrication techniques of aerogels, from basic silica aerogels topresent-day conventional aerogels - Discusses most of the major environmental remediation techniques and the advantages of using aerogels for theseremediation techniques in comparison to using traditional methods - Presents future prospects for utilizing aerogels in modern day-to-day life and in the fabrication of tangible new products
Download or read book Aerogels Handbook written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2011-06-10 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerogels are the lightest solids known. Up to 1000 times lighter than glass and with a density as low as only four times that of air, they show very high thermal, electrical and acoustic insulation values and hold many entries in Guinness World Records. Originally based on silica, R&D efforts have extended this class of materials to non-silicate inorganic oxides, natural and synthetic organic polymers, carbon, metal and ceramic materials, etc. Composite systems involving polymer-crosslinked aerogels and interpenetrating hybrid networks have been developed and exhibit remarkable mechanical strength and flexibility. Even more exotic aerogels based on clays, chalcogenides, phosphides, quantum dots, and biopolymers such as chitosan are opening new applications for the construction, transportation, energy, defense and healthcare industries. Applications in electronics, chemistry, mechanics, engineering, energy production and storage, sensors, medicine, nanotechnology, military and aerospace, oil and gas recovery, thermal insulation and household uses are being developed with an estimated annual market growth rate of around 70% until 2015. The Aerogels Handbook summarizes state-of-the-art developments and processing of inorganic, organic, and composite aerogels, including the most important methods of synthesis, characterization as well as their typical applications and their possible market impact. Readers will find an exhaustive overview of all aerogel materials known today, their fabrication, upscaling aspects, physical and chemical properties, and most recent advances towards applications and commercial products, some of which are commercially available today. Key Features: •Edited and written by recognized worldwide leaders in the field •Appeals to a broad audience of materials scientists, chemists, and engineers in academic research and industrial R&D •Covers inorganic, organic, and composite aerogels •Describes military, aerospace, building industry, household, environmental, energy, and biomedical applications among others
Download or read book Silica Aerogel Composites written by Mahesh Sachithanadam and published by Springer. This book was released on 2016-01-13 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the improvement in thermal insulation properties of protein-based silica aerogel composites fabricated by a novel, inexpensive and feasible method. The resulting material exhibits polymeric foam behavior including high compressibility, super-hydrophobic qualities and excellent strain recovery in addition to low thermal conductivity. The fabrication methodologies are explained in great detail and represented in flowcharts for easy reference and understanding. This monograph gives readers a new perspective on composite fabrication using methods other than the traditional ones and explores the endless ways of altering the composition to modify the properties of the silica aerogel composites. Applications for this novel composite are diverse and range from those in the pharmaceutical and aerospace industries to the oil and gas industries.
Download or read book Nanophase Materials written by G.C. Hadjipanayis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophase Materials is the first and, as yet, the only comprehensive book published in this new and exciting area of materials science. It gives a broad overview of the revolutionary new field of nanophase materials; a view which spans the materials, physics, and chemistry research communities at a tutorial level that is suitable for advanced undergraduates, graduate students, postdoctoral researchers, and experts or would-be experts in the science of nanostructured materials. The articles are authored by many of the world's most prominent scientists in this field. The book covers the diverse methods for synthesizing nanophase materials, a variety of subsequent processing methodologies, what is known about the structures of these materials on various length scales from atomic to macroscopic, and the properties of these unique and novel materials. The materials properties covered are mechanical, electronic, optical, and magnetic and hence span a wide range of important new opportunities for technological applications.
Download or read book Photocatalysis written by Nick Serpone and published by Wiley-Interscience. This book was released on 1989-10-20 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributors from around the world offer wide-ranging (and sometimes controversial) discussions of the state of research in photocatalysis. Emphasis is on the surface science of catalysis, especially at the gas/solid interface. Eighteen chapters explore topics ranging from the interaction between light and matter, colloidal semiconductors, and the thermodynamics and kinetics of photocatalysis, to photocatalysis in homogeneous and heterogeneous phases, photo-electrocatalysis, and catalysis in energy production and water purification.
Download or read book Advanced Engineering and Technology II written by Liquan Xie and published by CRC Press. This book was released on 2015-03-19 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Engineering and Technology II collects recent essential ideas and advanced techniques to overcome the current engineering issues in civil engineering, environmental engineering, water science and hydraulic engineering, energy and chemical engineering, and other related fields. The 60 technical papers from the 2nd Annual Congress on Advance
Download or read book Handbook of Advanced Ceramics written by and published by Academic Press. This book was released on 2013-04-11 with total page 1259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world and includes sections on Basic Science of Advanced Ceramics, Functional Ceramics (electro-ceramics and optoelectro-ceramics) and engineering ceramics. - Contributions from more than 50 leading researchers from around the world - Covers basic science of advanced ceramics, functional ceramics (electro-ceramics and optoelectro-ceramics), and engineering ceramics - Approximately 750 illustrations
Download or read book Emerging Techniques for Treatment of Toxic Metals from Wastewater written by Akil Ahmad and published by Elsevier. This book was released on 2022-08-27 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Techniques for Treatment of Toxic Metals from Wastewater explores the different physical and chemical methods that can be used to remove toxins from wastewater, including adsorption, solvent extraction, ion exchange, precipitation, filtration and photocatalytic degradation. Bringing together contributions from leading experts in the field, the book covers each of the different techniques in detail, combining emergent research outcomes with fundamental theoretical concepts to provide a clear appraisal of the different techniques available, along with their applications. It is an essential recourse for researchers, industrialists and students concerned with the remediation of toxic metals from water and wastewater. - Covers the various techniques for metal removal and their applications in a single source - Addresses emerging technologies; chemical, physical, and biological including nanotechnology - Brings together novel techniques and their applications for enhancing large scale industrial production signposting opportunities for significant enhancements
Download or read book Mechanisms in Homogeneous and Heterogeneous Epoxidation Catalysis written by S. Ted Oyama and published by Elsevier. This book was released on 2011-10-13 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The catalytic epoxidation of olefins plays an important role in the industrial production of several commodity compounds, as well as in the synthesis of many intermediates, fine chemicals, and pharmaceuticals. The scale of production ranges from millions of tons per year to a few grams per year. The diversity of catalysts is large and encompasses all the known categories of catalyst type: homogeneous, heterogeneous, and biological. This book summarizes the current status in these fields concentrating on rates, kinetics, and reaction mechanisms, but also covers broad topics including modeling, computational simulation, process concepts, spectroscopy and new catalyst development. The similarities and distinctions between the different reaction systems are compared, and the latest advances are described. - Comprehensive listing of epoxide products - Broad comparison of turnover frequencies of homogeneous, hetergeneous, main-group, biomimetic and biological catalysts - Analysis of the general strengths and weaknesses of varied catalytic systems - Detailed description of the mechanisms of reaction for classical and emerging catalysts
Download or read book Advances in Nanocomposites written by Shaker A. Meguid and published by Springer. This book was released on 2016-06-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces nanocomposite materials possessing a broad range of multifunctionality. It elucidates novel and highly original developments from recent research and development of these critical, new engineered materials. The collection examines multiscale modeling, molecular dynamics, atomistic based continuum, synthesis and characterization, condition health monitoring, spectroscopic characterization techniques, self-lubricating materials, and conducting polymers. The volume features the latest efforts of some of the most eminent researchers in the world. Providing a range of perspectives from the laboratory and the field, Advances in Nanocomposites: Modeling and Characterization is ideal for engineers, physicists, and materials scientists in academia and industry.
Download or read book Recent Applications in Sol Gel Synthesis written by Usha Chandra and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Versatility, extended compositional ranges, better homogeneity, lesser energy consumption, and requirement of nonexpensive equipments have boosted the use of sol-gel process on top of the popularity in the synthesis of nanosystems. The sol-gel technique has not only revolutionized oxide ceramics industry and/or material science but has also extended widely into multidimensional applications. The book Recent Applications in Sol-Gel Synthesis comprises 14 chapters that deal mainly with the application-oriented aspects of the technique. Sol-gel prepared metal oxide (MO) nanostructures like nanospheres, nanorods, nanoflakes, nanotubes, and nanoribbons have been employed in biomedical applications involving drug deliveries, mimicking of natural bone, and antimicrobial activities. The possibility of controlling grain size in aerogel and preparation of ultrahigh-temperature ceramic (UHTC)-based materials, fluorescent glasses, ultraviolet photosensors, and photocatalysts have been discussed in detail by the experts in the field. The usefulness of sol-gel materials as active GRIN, as textile finisher, and as leather modifier with water-repellent and oil-resistive properties would be an incentive for researchers keen to pursue the field.
