Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.

Download or read book Carbon Nanotube polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2013 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to summarize the basic chemical aspects for obtaining multifunctional carbon nanotube-based polymer composites, but also to highlight some of the most remarkable advances that occurred in the field during the last recent years.

Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions

Download or read book Springer Handbook of Nanomaterials written by Robert Vajtai and published by Springer Science & Business Media. This book was released on 2013-08-20 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Nanomaterials covers the description of materials which have dimension on the "nanoscale". The description of the nanomaterials in this Handbook follows the thorough but concise explanation of the synergy of structure, properties, processing and applications of the given material. The Handbook mainly describes materials in their solid phase; exceptions might be e.g. small sized liquid aerosols or gas bubbles in liquids. The materials are organized by their dimensionality. Zero dimensional structures collect clusters, nanoparticles and quantum dots, one dimensional are nanowires and nanotubes, while two dimensional are represented by thin films and surfaces. The chapters in these larger topics are written on a specific materials and dimensionality combination, e.g. ceramic nanowires. Chapters are authored by well-established and well-known scientists of the particular field. They have measurable part of publications and an important role in establishing new knowledge of the particular field.

Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.

Download or read book Synthesis Techniques for Polymer Nanocomposites written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2014-10-16 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series 'Polymer Nano-, Micro- and Macrocomposites' provides complete and comprehensive information on all important aspects of polymer composite research and development, including, but not limited to synthesis, filler modification, modeling, characterization as well as application and commercialization issues. Each book focuses on a particular topic and gives a balanced in-depth overview of the respective subfield of polymer composite science and its relation to industrial applications. With the books the readers obtain dedicated resources with information relevant to their research, thereby helping to save time and money. Summarizing all the most important synthesis techniques used in the lab as well as in industry, this book is comprehensive in its coverage from chemical, physical and mechanical viewpoints. This book helps readers to choose the correct synthesis route, such as suspension and miniemulsion polymerization, living polymerization, sonication, mechanical methods or the use of radiation, and so achieve the desired composite properties.

Download or read book Polymer Carbon Nanotube Composites written by T McNally and published by . This book was released on 2011 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of polymer carbon nanotube (CNT) composites is the key to these materials finding new applications in a wide range of industries, including but not limited to electronics, aerospace and biomedical/bioengineering. Polymer-carbon nanotube composites provides comprehensive and in-depth coverage of the preparation, characterisation, properties and applications of these technologically interesting new materials. Part one covers the preparation and processing of composites of thermoplastics with CNTs, with chapters covering in-situ polymerization, melt processing and CNT surface treatment, as well as elastomer and thermoset CNT composites. Part two concentrates on properties and characterization, including chapters on the quantification of CNT dispersion using microscopy techniques, and on topics as diverse as thermal degradation of polymer/CNT composites, the use of rheology, Raman spectroscopy and multi-scale modelling to study polymer/CNT composites, and CNT toxicity. In part three, the applications of polymer/CNT composites are reviewed, with chapters on specific applications such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing. With its distinguished editors and international team of contributors, Polymer-carbon nanotube composites is an essential reference for scientists, engineers and designers in high-tech industry and academia with an interest in polymer nanotechnology and nanocomposites. Provides comprehensive and in-depth coverage of the preparation, characterisation and properties of these technologically interesting new materials Reviews the preparation and processing of composites of thermoplastics with CNTs, covering in-situ polymerization, melt processing and CNT surface treatment Explores applications of polymer/CNT composites such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing.

Download or read book Polymer Carbon Nanotube Composites written by Tony McNally and published by Elsevier. This book was released on 2011-03-28 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of polymer carbon nanotube (CNT) composites is the key to these materials finding new applications in a wide range of industries, including but not limited to electronics, aerospace and biomedical/bioengineering. Polymer-carbon nanotube composites provides comprehensive and in-depth coverage of the preparation, characterisation, properties and applications of these technologically interesting new materials.Part one covers the preparation and processing of composites of thermoplastics with CNTs, with chapters covering in-situ polymerization, melt processing and CNT surface treatment, as well as elastomer and thermoset CNT composites. Part two concentrates on properties and characterization, including chapters on the quantification of CNT dispersion using microscopy techniques, and on topics as diverse as thermal degradation of polymer/CNT composites, the use of rheology, Raman spectroscopy and multi-scale modelling to study polymer/CNT composites, and CNT toxicity. In part three, the applications of polymer/CNT composites are reviewed, with chapters on specific applications such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing.With its distinguished editors and international team of contributors, Polymer-carbon nanotube composites is an essential reference for scientists, engineers and designers in high-tech industry and academia with an interest in polymer nanotechnology and nanocomposites. - Provides comprehensive and in-depth coverage of the preparation, characterisation and properties of these technologically interesting new materials - Reviews the preparation and processing of composites of thermoplastics with CNTs, covering in-situ polymerization, melt processing and CNT surface treatment - Explores applications of polymer/CNT composites such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing

Download or read book Carbon Nanotube Polymer Composites written by Brian P. Grady and published by John Wiley & Sons. This book was released on 2011-08-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accessible compendium of polymers in carbon nanotubes (CNTs) Carbon nanotubes (CNTs)—extremely thin tubes only a few nanometers in diameter but able to attain lengths thousands of times greater—are prime candidates for use in the development of polymer composite materials. Bringing together thousands of disparate research works, Carbon Nanotube-Polymer Composites: Manufacture, Properties, and Applications covers CNT-polymers from synthesis to potential applications, presenting the basic science and engineering of this dynamic and complex area in an accessible, readable way. Designed to be of use to polymer scientists, engineers, chemists, physicists, and materials scientists, the book covers carbon nanotube fundamentals to help polymer experts understand CNTs, and polymer physics to help those in the CNT field, making it an invaluable resource for anyone working with CNT-polymer composites. Detailed chapters describe the mechanical, rheological, electrical, and thermal properties of carbon nanotube-polymer composites. Including a glossary that defines key terms, Carbon Nanotube-Polymer Composites is essential reading for anyone looking to gain a fundamental understanding of CNTs and polymers, as well as potential and current applications, including electronics (shielding and transparent electrodes), flame retardants, and electromechanics (sensors and actuators), and their challenges.

Download or read book Carbon Based Nanofillers and Their Rubber Nanocomposites written by Srinivasarao Yaragalla and published by Elsevier. This book was released on 2019-02-06 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Nanofillers and their Rubber Nanocomposites: Fundamentals and Applications provides the synthetic routes, characterization, structural properties and effect of nano fillers on rubber nanocomposites. The synthesis and characterization of all carbon-based fillers is discussed, along with their morphological, thermal, mechanical, dynamic mechanical, and rheological properties. The book also covers the theory, modeling, and simulation aspects of these nanocomposites and their various applications. Users will find a valuable reference source for graduates and post graduates, engineers, research scholars, polymer engineers, polymer technologists, and those working in the biomedical field. - Reviews rubber nanocomposites, specifically carbon-associated nanomaterials (nanocarbon black, graphite, graphene, carbon nanotubes, fullerenes, diamond) - Presents the synthesis and characterization of carbon based nanocomposites - Relates the structure of these nanocomposites to their function as rubber additives and their many applications

Download or read book Nanomaterials and Nanocomposites written by B. Sridhar Babu and published by CRC Press. This book was released on 2021-04-05 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials and Nanocomposites: Characterization, Processing, and Applications discusses the most recent research in nanomaterials and nanocomposites for a range of applications as well as modern characterization tools and techniques. It deals with nanocomposites that are dispersed with nanosized particulates and carbon nanotubes in their matrices (polymer, metal, and ceramic). In addition, the work: Describes different nanomaterials, such as metal and metal oxides, clay and POSS, carbon nanotubes, cellulose, and biobased polymers in a structured manner Examines the processing of carbon nanotube-based nanocomposites, layered double hydroxides, and cellulose nanoparticles as functional fillers and reinforcement materials Covers size effect on thermal, mechanical, optical, magnetic, and electrical properties Details machining and joining aspects of nanocomposites Discusses the development of smart nanotextiles (intelligent textiles), self-cleaning glass, sensors, actuators, ferrofluids, and wear-resistant nanocoatings. This book enables an efficient comparison of properties and capabilities of these advanced materials, making it relevant for materials scientists and chemical engineers conducting academic research and industrial R&D into nanomaterial processing and applications.

Download or read book Carbon Nanotube Reinforced Composites written by Sie Chin Tjong and published by John Wiley & Sons. This book was released on 2009-04-08 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a broad insight into the potential applications of carbon nanotubes with metals and ceramic materials as a matrix, this book focuses on the preparation and the microstructural, physical, and mechanical characterizations of such novel nanocomposites. It features information on current synthesis and structure-property-relationships of metals and ceramics reinforced with CNT, organizing the vast array of surveys scattered throughout the literature in a single monograph. With its laboratory protocols and data tables this is invaluable reading for research workers and academics, as well as for applied scientists and industry personnel.

Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.

Download or read book The Story of Semiconductors written by John W. Orton and published by OUP Oxford. This book was released on 2008-12-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an overview of the fascinating spectrum of semiconductor physics, devices and applications, presented from a historical perspective. It covers the development of the subject from its inception in the early nineteenth century to the recent millennium. Written in a lively, informal style, it emphasizes the interaction between pure scientific push and commercial pull, on the one hand, and between basic physics, materials, and devices, on the other. It also sets the various device developments in the context of systems requirements and explains how such developments met wide ranging consumer demands. It is written so as to appeal to students at all levels in physics, electrical engineering, and materials science, to teachers, lecturers, and professionals working in the field, as well as to a non-specialist scientific readership.

Download or read book Carbon Nanotube Polymer Nanocomposites written by Srikanta Moharana and published by Springer Nature. This book was released on with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanocomposites written by J. Paulo Davim and published by Walter de Gruyter. This book was released on 2013-06-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites are currently defined "as a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers or structures having nano-scale repeat distances between the different phases that make up the material". The use of nanocomposites with polymer, metal or ceramic matrices has increased in various areas of engineering and technology due to their special properties, with applications in bioengineering, battery cathodes, automotives, sensors and computers, as well other advanced industries. The present volume aims to provide recent information on nanocomposites (materials manufacturing and engineering) in six chapters. The chapter 1 of the book provides information on synthesis and characterization of ceramic hollow nanocomposites and nanotraps. Chapter 2 is dedicated to recent advances on preparation, properties and applications polyurathene nanocomposites. Chapter 3 described preparation, characterization and properties of organoclays, carbon nanofibers and carbon nanotubes based polymer nanocomposites. Chapter 4 contains information on mechanical and wear properties of multi-scale phase reinforced composites. Chapter 5 described modeling mechanical properties of nanocomposites Finally, chapter 6 is dedicated to polyanaline derivates and carbon nanotubes and their characterization. This book is the essential reference for academics, materials and physics researchers, materials, mechanical and manufacturing engineers, and professionals in nanocomposite-related industries.

Download or read book Handbook of Polymer and Ceramic Nanotechnology written by Chaudhery Mustansar Hussain and published by Springer. This book was released on 2021-09-13 with total page 1667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook examines the recent advances in the nanotechnology of polymers and ceramics, which possess outstanding mechanical properties and compatibility given their unique physical and chemical properties caused by the unusually large surface area to volume ratios and high interfacial reactivity. This handbook highlights the various compositions and morphologies of polymer and ceramic nanomaterials that can serve as powerful tools for the diverse applications in areas such as electronics, photonics, shape-memory alloys, biomaterials and biomedical nanomaterials, graphene-based technologies, and textiles and packaging. The handbook addresses safety, economics, green production and sustainability. The book contains a section on functionalization of these molecules, which only increases the possibility of developing even more versatile materials that can be fine-tuned for specific applications. Filling a gap in the literature, this handbook provides comprehensive coverage of properties, fabrication, characterization, functionalization methods and applications at both experimental and theoretical models scales. Economic, toxicological, regulatory, and environmental concerns regarding applications are also discussed in detail. Special attention is paid to sustainable approaches that reduce costs in terms of chemicals and time consumption. The book covers research trends, challenges, and prospective topics as well.