Download or read book Colloidal Quantum Dot Optoelectronics and Photovoltaics written by Gerasimos Konstantatos and published by Cambridge University Press. This book was released on 2013-11-07 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Captures the most up-to-date research in the field, written in an accessible style by the world's leading experts.
Download or read book Ternary Quantum Dots written by Oluwatobi Samuel Oluwafemi and published by Woodhead Publishing. This book was released on 2021-07-02 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ternary Quantum Dots: Synthesis, Properties, and Applications reviews the latest advances in ternary (I-III-VI) chalcopyrite quantum dots (QDs), along with their synthesis, properties and applications. Sections address the fundamental key concepts of ternary quantum dots, progress in synthesis strategies (i.e., organic and aqueous synthesis), and characterization methods (i.e., transmission electron microscopy, dynamic light scattering, etc.). Properties of ternary quantum dots are comprehensively reviewed, including optical, chemical and physical properties. The factors and mechanisms of the cytotoxicity of ternary quantum dot-based nanomaterials are also described. Since ternary chalcopyrite quantum dots are less toxic and more environmentally benign than conventional binary II-VI chalcogenide quantum dots, they are being investigated to replace conventional quantum dots in a range of applications. Thus, this book reviews QDs in various applications, such as solar cells, photocatalytic, sensors and bio-applications. - Reviews fundamental concepts of ternary quantum dots and quantum dot-nanocomposites including the most relevant synthesis strategies, key properties, and characterization techniques - Delves into the cytotoxicity of quantum dots looking at the factors and mechanisms that influence cytotoxicity including demonstration of cytotoxicity assays for in vitro and in vivo tests - Touches on the many applications of ternary quantum dots including biomedical applications, applications in solar cells, sensing applications, and photocatalytic applications
Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.
Download or read book Semiconductor Nanocrystal Quantum Dots written by Andrey Rogach and published by Springer Science & Business Media. This book was released on 2008-09-02 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to specifically focus on semiconductor nanocrystals, and address their synthesis and assembly, optical properties and spectroscopy, and potential areas of nanocrystal-based devices. The enormous potential of nanoscience to impact on industrial output is now clear. Over the next two decades, much of the science will transfer into new products and processes. One emerging area where this challenge will be very successfully met is the field of semiconductor nanocrystals. Also known as colloidal quantum dots, their unique properties have attracted much attention in the last twenty years.
Download or read book Handbook of Carbon Based Nanomaterials written by Sabu Thomas and published by Elsevier. This book was released on 2021-07-23 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Carbon-Based Nanomaterials provides a comprehensive overview of carbon-based nanomaterials and recent advances in these specialized materials. This book opens with a brief introduction to carbon, including the different forms of carbon and their range of uses. Each chapter systematically covers a different type of carbon-based nanomaterial, including its individual characteristics, synthesis techniques and applications in industry, biomedicine and research. This book offers a broad handbook on carbon-based nanomaterials, detailing the materials aspects, applications and recent advances of this expansive topic. With its global team of contributing authors, Handbook of Carbon-Based Nanomaterials collates specific technical expertise from around the world, for each type of carbon-based nanomaterial. Due to the broad nature of the coverage, this book will be useful to an interdisciplinary readership, including researchers in academia and industry in the fields of materials science, engineering, chemistry, energy and biomedical engineering. - Covers a range of carbon-based nanomaterials, including graphene, fullerenes and much more - Describes key properties, synthesis techniques and characterization of each carbon-based nanomaterial - Discusses a range of applications of carbon-based nanomaterials, from biomedicine to energy applications
Download or read book Quantum Dots written by Rakshit Ameta and published by Elsevier. This book was released on 2022-09-20 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum Dots: Fundamentals, Synthesis and Applications compiles key information, along with practical guidance on quantum dot synthesis and applications. Beginning with an introduction, Part One highlights such foundational knowledge as growth mechanisms, shape and composition, electrochemical properties, and production scale-up for quantum dots. Part Two goes on to provide practical guides to key chemical, physical and biological methods for the synthesis of quantum dots, with Part Three reviewing the application of quantum dots and a range of important use cases, including photocatalysis, energy cells and medical imaging. Drawing on the knowledge of its expert authors, this comprehensive book provides practical guidance for all those who already study, develop or use quantum dots in their work. - Presents the foundational information needed to effectively understand and manipulate quantum dot properties - Consolidates key methods of quantum dot synthesis in a single volume - Reviews both current and future practical applications of quantum dots across a range of important fields
Download or read book Ultrafast Lasers Based on Quantum Dot Structures written by Edik U. Rafailov and published by John Wiley & Sons. This book was released on 2011-04-08 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this monograph, the authors address the physics and engineering together with the latest achievements of efficient and compact ultrafast lasers based on novel quantum-dot structures and devices. Their approach encompasses a broad range of laser systems, while taking into consideration not only the physical and experimental aspects but also the much needed modeling tools, thus providing a holistic understanding of this hot topic.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Modeling Characterization and Production of Nanomaterials written by and published by Elsevier. This book was released on 2015-03-17 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-scale materials have unique electronic, optical, and chemical properties which make them attractive for a new generation of devices. Part one of Modeling, Characterization, and Production of Nanomaterials: Electronics, Photonics and Energy Applications covers modeling techniques incorporating quantum mechanical effects to simulate nanomaterials and devices, such as multiscale modeling and density functional theory. Part two describes the characterization of nanomaterials using diffraction techniques and Raman spectroscopy. Part three looks at the structure and properties of nanomaterials, including their optical properties and atomic behaviour. Part four explores nanofabrication and nanodevices, including the growth of graphene, GaN-based nanorod heterostructures and colloidal quantum dots for applications in nanophotonics and metallic nanoparticles for catalysis applications. Comprehensive coverage of the close connection between modeling and experimental methods for studying a wide range of nanomaterials and nanostructures Focus on practical applications and industry needs, supported by a solid outlining of theoretical background Draws on the expertise of leading researchers in the field of nanomaterials from around the world
Download or read book Materials Preparation and Characterization in Thermoelectrics written by David Michael Rowe and published by CRC Press. This book was released on 2017-12-19 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes updated theoretical considerations which provide an insight into avenues of research most likely to result in further improvements in material performance. It details the latest techniques for the preparation of thermoelectric materials employed in energy harvesting, together with advances in the thermoelectric characterisation of nanoscale material. The book reviews the use of neutron beams to investigate phonons, whose behaviour govern the lattice thermal conductivity and includes a chapter on patents.
Download or read book Synthesis and Optimization of Chalcogenides Quantum Dots Thermoelectric Materials written by Chong Xiao and published by Springer. This book was released on 2016-02-29 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on chalcogenide compound quantum dots with special crystal structures and behaviors in an effort to achieve the synergistic optimization of electrical and thermal transport for high-efficiency thermoelectric materials. The controllability and large-scale synthesis of chalcogenide quantum dots are realized through simple colloid synthesis, and the synergistic optimization of the materials’ electrical and thermal transport properties is successfully achieved. Furthermore, the book explores the mechanism involved in the integration of high thermoelectric performance and reversible p-n semiconducting switching in bimetal chalcogenide semiconductors. As such, the thesis will be of interest to university researchers and graduate students in the materials science, chemistry and physics.
Download or read book Nanomaterials in Liquid Crystals written by Ingo Dierking and published by MDPI. This book was released on 2018-09-25 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Nanomaterials in Liquid Crystals" that was published in Nanomaterials
Download or read book Advances in Electronic Ceramics Volume 28 Issue 8 written by Clive Randall and published by John Wiley & Sons. This book was released on 2007-11-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from The American Ceramic Society's 31st International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 21-26, 2007. Topics include advances in dielectric, piezoelectric and ferroelectric materials; electroceramic materials for sensors; thermoelectric materials for power conversion applications; and transparent conductive oxides.
Download or read book Quantum Dot Molecules written by Jiang Wu and published by Springer Science & Business Media. This book was released on 2013-10-28 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quantum dot molecule (QDM) is composed of two or more closely spaced quantum dots or “artificial atoms.” In recent years, QDMs have received much attention as an emerging new artificial quantum system. The interesting and unique coupling and energy transfer processes between the “artificial atoms” could substantially extend the range of possible applications of quantum nanostructures. This book reviews recent advances in the exciting and rapidly growing field of QDMs via contributions from some of the most prominent researchers in this scientific community. The book explores many interesting topics such as the epitaxial growth of QDMs, spectroscopic characterization, and QDM transistors, and bridges between the fundamental physics of novel materials and device applications for future information technology. Both theoretical and experimental approaches are considered. Quantum Dot Molecules can be recommended for electrical engineering and materials science department courses on the science and design of advanced and future electronic and optoelectronic devices.
Download or read book Advances in Nanocomposite Materials for Environmental and Energy Harvesting Applications written by Ahmed Esmail Shalan and published by Springer Nature. This book was released on 2022-03-03 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the fundamental, synthesis, properties, physico-chemical characterizations and applications of recently explored nanocomposite materials. It covers the applications of these different nanocomposite materials in the environmental and energy harvesting fields. The chapters explore the different techniques used for preparation and characterization of several types of nanocomposite materials for applications related to environmental and energy pathways. This book presents a panorama of current research in the field of nanocomposite structures for different applications. It also assesses the advantages and disadvantages of using different types of nanocomposite in the design of different material products. The comprehensive chapters explain the interactions between nanocomposite materials and mechanisms related to applications in environmental pollution and energy shortage.
Download or read book Luminescence written by Adam M. Gilmore and published by CRC Press. This book was released on 2013-12-21 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book encompasses the nanoscale semiconductor field by amalgamating a broad multidisciplinary arena including applications for energy conservation, materials performance enhancement, electronic circuitry, video displays, lighting, photovoltaics, quantum computing, memory, chemo- and biosensors, pharmaceuticals and medical diagnostics inter alia. The first section presents a comprehensive introductory overview of the photophysics, instrumentation and experimental methodology of nanomaterial luminescence. In the second and third sections of the book, invited experts highlight more specific advanced research areas that have either shown potential for, or have already realized, significant impact on the day-to-day aspects of modern life and the world economy.
Download or read book Comprehensive Nanoscience and Nanotechnology written by and published by Academic Press. This book was released on 2019-01-02 with total page 1881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nanoscience and Technology, Second Edition, Five Volume Set allows researchers to navigate a very diverse, interdisciplinary and rapidly-changing field with up-to-date, comprehensive and authoritative coverage of every aspect of modern nanoscience and nanotechnology. Presents new chapters on the latest developments in the field Covers topics not discussed to this degree of detail in other works, such as biological devices and applications of nanotechnology Compiled and written by top international authorities in the field
