Download or read book Synthesis and Characterization of Gradient Copolymers Made by Semi batch Reversible deactivation Radical Polymerizations written by Ishah Hadi Mohammed Alshehri and published by . This book was released on 2019 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and Self assembly of Gradient Copolymers written by Kevin Wylie and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Controlled free radical polymerization allows for the fine control of many key properties of polymers such as the molecular weight, dispersity and composition. Consequently, this permits the attainment of interesting microstructures such as block or tapered/gradient copolymers. In particular, nitroxide-mediated polymerization (NMP) was applied and used for the polymerization of methyl methacrylate (MMA) and styrene (St) block and tapered gradient polymers. With the defined composition and molecular weight, such copolymers are able to self-assemble into sub-50 nm domains. In this thesis, gradient copolymers synthesized in semi-batch mode were produced with varying composition and gradient profiles by alternating the rate of St addition and the length of the reaction. Their self-assembly performance was assessed relative to block copolymers with identical molecular properties and found to have similar feature sizes. However, with increasing gradient length, the self-assembly is negatively affected, producing films with very little order and much higher defect densities than block copolymers or polymers with short gradient lengths." --
Download or read book Synthesis and Characterization of Functional Amphiphilic Gradient Copolymers by Atom Transfer Radical Polymerization written by Sandra Schwitke and published by . This book was released on 2014 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and Characterization of Gradient Hyperbranched Copolymers by Atom Transfer Radical Polymerization written by and published by . This book was released on 2000 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The synthesis of linear and (hyper)branched polymers possessing varying compositions using atom transfer radical polymerization (ATRP) was conducted. The synthesis of linear random and gradient copolymers from styrene/n-butyl acrylate and methyl methacrylate/n-butyl acrylate systems were evaluated by studying the copolymerization kinetics of the respective monomers pairs in ATRP. Development in the preparation of materials with advanced architectures was achieved by the synthesis of novel hyperbranched polymers using the self-condensing vinyl polymerization (SCVP) by ATRP. Subsequent end-group transformation reactions of these hyperbranched polymers yielded low viscosity materials with reactive functionalities. Additionally, novel highly branched nanocomposites were also prepared by the use of a functional colloid (diameter = 15 nm) as a macroinitiator for the synthesis of homo- and block copolymers tethered to a particle surface.
Download or read book Reversible Deactivation Radical Polymerization written by Nikhil K. Singha and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes strategies and mechanism of reversible deactivation radical polymerization (RDRP) to synthesize functional polymers. Several approaches such as atom transfer radical polymerization and the combination of click chemistry and RDRP are summarized. Contributors from interdisciplinary fields highlight applications in nanotechnology, self-healing materials, oil and water resistant coatings and controlled drug delivery systems.
Download or read book Synthesis and Characterization of Dye labeled Copolymers by Reversible Addition fragmentation Transfer RAFT Polymerization written by Binxin Li and published by . This book was released on 2008 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copolymers of N-(2-hydroxypropyl)methacrylamide (HPMA) and N-hydroxysuccinimide methacrylate (NMS) were synthesized by reversible addition-fragmentation transfer (RAFT) polymerization using a semi-batch method. The copolymers were prepared in a wide range of molecular weights (Mn = 4,200-14,000 g/mol) with narrow polydispersities (1.2-1.4). A new approach was developed to prepare a modified RAFT chain transfer agent, a naphthalimide-dye-labeled dithiobenzoate. It was used to prepare a naphthalimide-dye end-labeled poly(HPMA-co-NMS). The copolymer was characterized by four different methods, 1H NMR spectroscopy via end group characterization and using 3-(trimethylsilyl)propionic acid-d 4 sodium salt (TSP) external standard, end group analysis by UV-Vis spectroscopy and by GPC. The results obtained from these measurements are in good agreement.
Download or read book RAFT Polymerization 2 Volume Set written by Graeme Moad and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 1283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore this one-stop resource for reversible addition-fragmentation chain transfer polymerization from a leading voice in chemistry RAFT Polymerization: Methods, Synthesis and Applications delivers a comprehensive and insightful analysis of reversible addition-fragmentation chain transfer polymerization (RAFT) and its applications to fields as diverse as material science, industrial chemistry, and medicine. This one-stop resource offers readers a detailed synopsis of the current state of RAFT polymerization. This text will inspire further research and continue the drive to an ever-increasing range of applications by synthesizing and explaining the more central existing literature on RAFT polymerization. It contains a beginner’s guide on how to do a RAFT polymerization before moving on to much more advanced techniques and concepts, like the kinetics and mechanisms of the RAFT process. The distinguished editors have also included resources covering the four major classes of RAFT agents and recent developments in processes for initiating RAFT polymerization. Readers will also benefit from the inclusion of: A thorough introduction to the mechanisms, theory, and mathematical modeling of RAFT Explorations of RAFT agent design and synthesis, dithioesters, dithiobenzoates, trithiocarbonates, xanthates, dithiocarbamates, macromonomer RAFT, and RAFT copolymerization Discussions of a variety of RAFT architectures, including multiblocks, combs, hyperbranched polymers, and stars Treatments of end group transformation, cationic RAFT, high-throughput RAFT, and RAFT in continuous flow An examination of sequence defined polymers by RAFT Perfect for organic chemists, polymer chemists, and materials scientists, RAFT Polymerization: Methods, Synthesis and Applications will also earn a place in the libraries of chemical engineers seeking a one-stop reference for this method of controlled radical polymerization with a wide range of applications in multiple areas.
Download or read book Optically Active Polymers written by E. Sélégny and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first four volumes of the series on 'Charged and Reactive Polymers' have been devoted to polymers in solution (Voh. I and II) or in gel and membrane forms (Vols. III and IV). In correlation with charges, other physical or chemical properties of macro molecules have been considered. Understanding of charge and hydrophobic effects is equally important for synthetic and biopolymers or their systems. Optically Active Polymers are related to problems of the same class, since optical activity is an inherent property of both natural macromolecules as well as a great variety of polymers synthesized in the Jast twenty years. Optical activity is a physical spectral property of chiral matter caused by asymmetrical configurations, conformations and structures which have no plane and no center of symmetry and consequently have two mirror image enantiomeric forms of inverse optical rotation. The racemic mixture of chiral enantiomers is optically inactive. The most common form of optical activity was first measured at a constant wavelength by the angle of rotation of linearly polarized light. More recently the measurements have been extended to the entire range of visible and attainable ultraviolet regions where electronic transitions are observed, giving rise to the ORD technique (Optical Rotatory Dispersion). The Cotton effects appear in the region of optically active absorption bands; outside of these bands the plain curve spectrum is also dependent on all the electronic transitions of the chromophores.
Download or read book Double Gyroid Structured Functional Materials written by Maik Rudolf Johann Scherer and published by Springer Science & Business Media. This book was released on 2013-06-25 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new high-tech applications and devices has created a seemingly insatiable demand for novel functional materials with enhanced and tailored properties. Such materials can be achieved by three-dimensional structuring on the nanoscale, giving rise to a significant enhancement of particular functional characteristics which stems from the ability to access both surface/interface and bulk properties. The highly ordered, bicontinuous double-gyroid morphology is a fascinating and particularly suitable 3D nanostructure for this purpose due to its highly accessible surface area, connectivity, narrow pore diameter distribution and superb structural stability. The presented study encompasses a wide range of modern nanotechnology techniques in a highly versatile bottom-up nanopatterning strategy that splits the fabrication process into two successive steps: the preparation of mesoporous double-gyroid templates utilizing diblock copolymer self-assembly, and their replication with a functional material employing electrochemical deposition and atomic layer deposition. The double-gyroid structured materials discussed include metals, metal oxides, and conjugated polymers, which are applied and characterized in high-performance devices, such as electrochromic displays, supercapacitors, chemical sensors and photovoltaics. This publication addresses a wide range of readers, from researchers and specialists who are professionally active in the field, to more general readers interested in chemistry, nanoscience and physics.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Polymer Synthesis Theory and Practice written by Dietrich Braun and published by Springer Science & Business Media. This book was released on 2006-10-14 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first English edition of this book was pubUshed in 1971 with the late Prof. Dr. Werner Kern as coauthor. In 1997, for the preparation of the third edition, Prof. Dr. Helmut Ritter joined the team of authors and in 2001 Prof. Dr. Brigitte Voit and Prof. Dr. Matthias Rehahn complemented this team. The change in authors has not altered the basic concept of this 4th edition: again we were not aimed at compiling a comprehensive collection of recipes. In stead, we attempted to reach a broader description of the general methods and techniques for the synthesis, modification, and characterization of macromo- cules, supplemented by 105 selected and detailed experiments and by sufficient theoretical treatment so that no additional textbook be needed in order to under stand the experiments. In addition to the preparative aspects we have also tried to give the reader an impression of the relation of chemical structure and mor phology of polymers to their properties, as well as of areas of their application.
Download or read book Polymeric Dispersions Principles and Applications written by J.M. Asua and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up to date survey of the science and technology of polymeric dispersions. The book discusses the kinetics and mechanisms of polymerization in dispersed media, examines the processes controlling particle morphology, presents both off-line and on-line methods for the characterization of polymer colloids, considers reactor engineering and control, and covers a wide variety of applications, such as latex paint formulations, encapsulation of inorganic particles, reactive latexes, adhesives, paper coating, and biomedical and pharmaceutical applications. Audience: A valuable resource for scientists and engineers, academic and industrial, who are involved in the manufacture or application of polymeric dispersions.
Download or read book Functional Polymers by Post Polymerization Modification written by Patrick Theato and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern polymer science a variety of polymerization methods for the direct synthesis of polymers bearing functional groups are known. However, there is still a large number of functional groups that may either completely prevent polymerization or lead to side reactions. Post-polymerization modification, also known as polymer-analogous modification, is an alternative approach to overcome these limitations. It is based on the polymerization of monomers with functional groups that are inert towards the polymerization conditions but allow a quantitative conversion in a subsequent reaction step yielding a broad range of other functional groups. Thus, diverse libraries of functional polymers with identical average degrees of polymerization but variable side chain functionality may easily be generated. Filling the gap for a book dealing with synthetic strategies and recent developments, this volume provides a comprehensive and up-to-date overview of the field of post-polymerization modification. As such, the international team of expert authors covers a wide range of topics, including new synthetic techniques utilizing different reactive groups for post-polymerization modifications with examples ranging from modification of biomimetic and biological polymers to modification of surfaces. With its guidelines this is an indispensable and interdisciplinary reference for scientists working in both academic and industrial polymer research.
Download or read book Template Polymerization written by Stefan Polowinski and published by ChemTec Publishing. This book was released on 1997 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Template polymerization is a new field in polymer synthesis but common practice in the biosynthesis since DNA is the most popular template or matrix on which proteins are built by living species. This field is relevant to the synthesis of polymers of controlled structure but its application goes beyond the synthesis. Materials are formulated in complex mixtures always containing components which can be regarded as templates on which other materials are formed, modified, or are interacted with. In the new product development the relevance of these phenomena is controlled by the order of addition which affects probabilities and preferences of interaction. The current publication outlines mechanisms of template polymerization, polycondensation, and copolymerization. These mechanisms, illustrated with numerous examples, indicate a range of possibilities which can be encountered in materials and utilized to modify their properties. Orientation of substrates on template and their effect on modification of their reactivity and properties such as, for example, absorption of light or water are also discussed. Several chapters contain information on these studies discussed with sufficient detail to give reader comprehensive understanding of the methods used in various research laboratories and their findings."--Publisher's description.
Download or read book Monte Carlo Applications in Polymer Science written by W. Bruns and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Enhanced Oil Recovery written by Patrizio Raffa and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-07-22 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at presenting, describing, and summarizing the latest advances in polymer flooding regarding the chemical synthesis of the EOR agents and the numerical simulation of compositional models in porous media, including a description of the possible applications of nanotechnology acting as a booster of traditional chemical EOR processes. A large part of the world economy depends nowadays on non-renewable energy sources, most of them of fossil origin. Though the search for and the development of newer, greener, and more sustainable sources have been going on for the last decades, humanity is still fossil-fuel dependent. Primary and secondary oil recovery techniques merely produce up to a half of the Original Oil In Place. Enhanced Oil Recovery (EOR) processes are aimed at further increasing this value. Among these, chemical EOR techniques (including polymer flooding) present a great potential in low- and medium-viscosity oilfields. • Describes recent advances in chemical enhanced oil recovery. • Contains detailed description of polymer flooding and nanotechnology as promising boosting tools for EOR. • Includes both experimental and theoretical studies. About the Authors Patrizio Raffa is Assistant Professor at the University of Groningen. He focuses on design and synthesis of new polymeric materials optimized for industrial applications such as EOR, coatings and smart materials. He (co)authored about 40 articles in peer reviewed journals. Pablo Druetta works as lecturer at the University of Groningen (RUG) and as engineering consultant. He received his Ph.D. from RUG in 2018 and has been teaching at a graduate level for 15 years. His research focus lies on computational fluid dynamics (CFD).
Download or read book Handbook of Industrial Water Soluble Polymers written by Peter A. Williams and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and synthetic water soluble polymers are used in a wide range of familiar industrial and consumer products, including coatings and inks, papers, adhesives, cosmetics and personal care products. They perform a variety of functions without which these products would be significantly more expensive, less effective or both. Written for research, development and formulation chemists, technologists and engineers at graduate level and beyond in the fine and specialty chemicals, polymers, food and pharmaceutical industries, the Handbook of Industrial Water Soluble Polymers deals specifically with the functional properties of both natural and synthetic water soluble polymers. By taking a function based approach, rather than a “polymer specific” approach the book illustrates how polymer structure leads to effect, and shows how different polymer types can be employed to achieve appropriate product properties.
