Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.

Download or read book Catalyst Handbook written by Martyn V. Twigg and published by Routledge. This book was released on 2018-12-19 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between theory and practice. It provides fundamental information on heterogeneous catalysis and the practicalities of the catalysts and processes used in producing ammonia, hydrogen and methanol via hydrocarbon steam reforming. It also covers the oxidation reactions in making formaldehyde from methanol, nitric acid from ammonia and sulphuric acid from sulphur dioxide. Designed for use in the chemical industry and by those in teaching, research and the study of industrial catalysts and catalytic processes. Students will also find this book extremely useful for obtaining practical information not available in more conventional textbooks.

Download or read book Catalysis for Alternative Energy Generation written by László Guczi and published by Springer Science & Business Media. This book was released on 2012-04-17 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of greenhouse gases in the atmosphere and the decrease of the available amount of fossil fuels necessitate finding new alternative and sustainable energy sources in the near future. This book summarizes the role and the possibilities of catalysis in the production of new energy carriers and in the utilization of different energy sources. The main goal of this work is to go beyond those results discussed in recent literature by identifying new developments that may lead to breakthroughs in the production of alternative energy. The book discusses the use of biomass or biomass derived materials as energy sources, hydrogen formation in methanol and ethanol reforming, biodiesel production, and the utilization of biogases. Separate sections also deal with fuel cells, photocatalysis, and solar cells, which are all promising processes for energy production that depend heavily on catalysts.

Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations

Download or read book Carbon Dioxide Utilization to Sustainable Energy and Fuels written by Inamuddin and published by Springer Nature. This book was released on 2021-11-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book provides an in-depth overview of carbon dioxide (CO2) transformations to sustainable power technologies. It also discusses the wide scope of issues in engineering avenues, key designs, device fabrication, characterizations, various types of conversions and related topics. It includes studies focusing on the applications in catalysis, energy conversion and conversion technologies, etc. This is a unique reference guide, and one of the detailed works is on this technology. The book is the result of commitments by leading researchers from various backgrounds and expertise. The book is well structured and is an essential resource for scientists, undergraduate, postgraduate students, faculty, R&D professionals, energy chemists and industrial experts.

Download or read book Rhodium Catalysis written by Carmen Claver and published by Springer. This book was released on 2017-12-15 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Organometallic Chemistry presents critical overviews of research results in organometallic chemistry. As our understanding of organometallic structure, properties and mechanisms increases, new ways are opened for the design of organometallic compounds and reactions tailored to the needs of such diverse areas as organic synthesis, medical research, biology and materials science. Thus the scope of coverage includes a broad range of topics of pure and applied organometallic chemistry, where new breakthroughs are being achieved that are of significance to a larger scientific audience. The individual volumes of Topics in Organometallic Chemistry are thematic. Review articles are generally invited by the volume editors. All chapters from Topics in Organometallic Chemistry are published OnlineFirst with an individual DOI. In references, Topics in Organometallic Chemistry is abbrev iated as Top Organomet Chem and cited as a journal.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Advances and Technology Development in Greenhouse Gases Emission Capture and Conversion written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2024-07-11 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Technology Development in Greenhouse Gases: Emission, Capture and Conversion is a comprehensive seven-volume set of books that discusses the composition and properties of greenhouse gases, and introduces different sources of greenhouse gases emission and the relation between greenhouse gases and global warming. The comprehensive and detailed presentation of common technologies as well as novel research related to all aspects of greenhouse gases makes this work an indispensable encyclopedic resource for researchers in academia and industry.Volume 5 titled Carbon Dioxide Conversion to Chemicals and Energy provides a beneficial strategy to control the rise of greenhouse gases (GHGs) in the atmosphere and their conversion into valuable materials such as chemical and energy carriers. The book touches concepts about the conversion of carbon dioxide, which is the main GHG. This two-section volume provides applications of carbon dioxide and the chemical processes employed to fabricate a host of materials. Each section reviews a process in detail and surveys the economic assessments, cost analysis, environmental impacts and challenges, recent advances and new concepts, and the largest operating plants and pilots for carbon conversion. - Introduces different applications of carbon dioxide - Includes environmental challenges and economic assessment of carbon capture and utilization - Describes various chemicals produced from CO2

Download or read book Catalytic Materials for Hydrogen Production and Electro oxidation Reactions written by Moises R. Cesario and published by Bentham Science Publishers. This book was released on 2018-12-03 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of hydrogen production processes on an industrial scale requires a comprehensive understanding of the chemical proprieties of catalytic materials and the applications such materials in electrocatalysis. This volume presents information about catalytic materials for hydrogen production and hydrogen valorization in electro-oxidation reactions. Chapters emphasize on materials for classical steam, CO2 sorption enhanced steam reforming and dry reforming for hydrogen production. The hydrogen electro-oxidation reaction in anodes of Solid Oxide Fuel Cells (SOFCs) is also explained. Chapters have been contributed by experts in industrial chemistry, adding a valuable perspective for readers. This volume is essential to chemical engineering researchers and industrial professionals interested in hydrogen production systems and the science behind the materials driving the reactions in key processes.

Download or read book Advances in Synthesis Gas Methods Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-18 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Production and Preparation is a collection of various chapters concerning many aspects of syngas production technologies, including common methods like gasification, steam/dry/autothermal reforming, membrane technology, etc., along with novel methods like plasma technology, micro-reactors, electrolysis processes as well as photocatalytic systems. In addition, different sources for producing syngas, including oil, crude oil, heavy oil, microalgae, black liquor, tar and bitumen, as well as municipal, agricultural, food, plastic, wood and cardboard wastes are described in detail. - Introduces syngas characteristics and its properties - Describes various methods and technologies for producing syngas - Discusses syngas production from different roots and feedstocks

Download or read book Introduction to Surface Physical Chemistry written by K. Christmann and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrogen Supply Chain written by Catherine Azzaro-Pantel and published by Academic Press. This book was released on 2018-08-18 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Deployment and Operation of a Hydrogen Supply Chain introduces current energy system and the challenges that may hinder the large-scale adoption of hydrogen as an energy carrier. It covers the different aspects of a methodological framework for designing a HSC, including production, storage, transportation and infrastructure. Each technology's advantages and drawbacks are evaluated, including their technology readiness level (TRL). The multiple applications of hydrogen for energy are presented, including use in fuel cells, combustion engines, as an alternative to natural gas and power to gas. Through analysis and forecasting, the authors explore deployment scenarios, considering the dynamic aspect of HSCs. In addition, the book proposes methods and tools that can be selected for a multi-criteria optimal design, including performance drivers and economic, environmental and societal metrics. Due to its systems-based approach, this book is ideal for engineering professionals, researchers and graduate students in the field of energy systems, energy supply and management, process systems and even policymakers. - Explores the key drivers of hydrogen supply chain design and performance evaluation, including production and storage facilities, transportation, information, sourcing, pricing and sustainability - Presents multi-criteria tools for the optimization of hydrogen supply chains and their integration in the overall energy system - Examines the available technology, their strengths and weaknesses, and their technology readiness levels (TRL), to draw future perspectives of hydrogen markets and propose deployment scenarios - Includes international case studies of hydrogen supply chains at various scales

Download or read book Proceedings of 20th International Conference on Advanced Energy Materials and Research 2018 written by ConferenceSeries and published by ConferenceSeries. This book was released on 2018-08-07 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: August 13-14 2018 Dublin, Ireland Key Topics : Advanced Energy Materials, Hydrogen Energy, Solar Energy Materials, Polymer Materials, Advanced Nanomaterials, Energy Harvesting Materials, Nanotechnology and Energy Materials, Batteries and Energy Materials, Electric, Hybrid, and Fuel-Cell Vehicles, Mining, Metallurgy & Materials Science, Advanced Graphene Materials, Solid Electrolytes, Biomaterials and Surface Science Engineering, Electrical, Optical and Magnetic Materials, Fuel Cell Technology,

Download or read book Transformation and Utilization of Carbon Dioxide written by Bhalchandra M. Bhanage and published by Springer Science & Business Media. This book was released on 2014-01-27 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transformation and Utilization of Carbon Dioxide shows the various organic, polymeric and inorganic compounds which result from the transformation of carbon dioxide through chemical, photocatalytic, electrochemical, inorganic and biological processes. The book consists of twelve chapters demonstrating interesting examples of these reactions, depending on the types of reaction and catalyst. It also includes two chapters dealing with the utilization of carbon dioxide as a reaction promoter and presents a wide range of examples of chemistry and chemical engineering with carbon dioxide. Transformation and Utilization of Carbon Dioxide is a collective work of reviews illustrative of recent advances in the transformation and utilization of carbon dioxide. This book is interesting and useful to a wide readership in the various fields of chemical science and engineering. Bhalchandra Bhanage is a professor of industrial and engineering chemistry at Institute of Chemical Technology, India. Masahiko Arai is a professor of chemical engineering at Hokkaido University, Japan.

Download or read book CO2 Conversion and Utilization written by Chunshan Song and published by ACS Symposium. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the chemistry and processes for conversion and utilization of carbon dioxide. Topics include CO 2 utilization, its conversion to industrial chemicals and fuels, its coversion via synthesis gas, and new catalysts and chemical processes for conversion.