EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Metal Matrix Composites

Download or read book Metal Matrix Composites written by Antonio Contreras Cuevas and published by Springer. This book was released on 2018-10-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.

Book In situ Processing of TiC Reinforced Al matrix Composites Synthesis and Analysis

Download or read book In situ Processing of TiC Reinforced Al matrix Composites Synthesis and Analysis written by Victoriya Shtessel and published by . This book was released on 1995 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book In Situ Synthesis of Aluminum Matrix Composites

Download or read book In Situ Synthesis of Aluminum Matrix Composites written by Yutao Zhao and published by Springer Nature. This book was released on 2022-02-28 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively and systematically discusses in situ aluminum matrix composites, from their system design, material development, and preparation technology, to their solidification structure, plastic processing, and properties. As a new type of metal matrix composite, it not only provides a technical framework for the low-cost, large-scale development of high-performance compliant materials, but also provides important technical support for the promotion of the aluminum industry. The book appeals to researchers and industrial practitioners in the area of materials development for in situ aluminum matrix composites.

Book Advances in Industrial and Production Engineering

Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.

Book New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites

Download or read book New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites written by X. Zhang and published by . This book was released on 2006 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new method to in situ fabricate magnesium alloy reinforced with 8 wt % of TiB2 and TiC is described. The XRD result revealed the formation of TiB2 and TiC in master alloy magnesium matrix composites. Uniform distribution of fine reinforcement in the matrix material obtained through microstructural characterization. Mechanical characterization revealed that the presence of TiB2 and TiC leads to an increase on microhardness and tensile strength of magnesium matrix composites. Scanning electronic micrographs taken from the tensile fracture surface of magnesium matrix composites revealed typical brittle fracture.

Book Aluminum Matrix Composites Reinforced with Alumina Nanoparticles

Download or read book Aluminum Matrix Composites Reinforced with Alumina Nanoparticles written by Riccardo Casati and published by Springer. This book was released on 2015-12-24 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest efforts to develop aluminum nanocomposites with enhanced damping and mechanical properties and good workability. The nanocomposites exhibited high strength, improved damping behavior and good ductility, making them suitable for use as wires. Since the production of metal matrix nanocomposites by conventional melting processes is considered extremely problematic (because of the poor wettability of the nanoparticles), different powder metallurgy routes were investigated, including high-energy ball milling and unconventional compaction methods. Special attention was paid to the structural characterization at the micro- and nanoscale, as uniform nanoparticle dispersion in metal matrix is of prime importance. The aluminum nanocomposites displayed an ultrafine microstructure reinforced with alumina nanoparticles produced in situ or added ex situ. The physical, mechanical and functional characteristics of the materials produced were evaluated using different mechanical tests and microstructure investigation techniques. The book presents and discusses the experimental results in detail, and offers suggestions for future research directions.

Book Advances in Materials Science and Engineering

Download or read book Advances in Materials Science and Engineering written by Chander Prakash and published by Springer Nature. This book was released on 2020-05-21 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Functional Material, Manufacturing and Performances (ICFMMP) 2019. The book provides the state-of-the-art research, development, and commercial prospective of recent advances in materials science and engineering. The contents cover various synthesis and fabrication routes of functional and smart materials for applications in mechanical engineering, manufacturing, metrology, nanotechnology, physics, chemical and biological sciences, civil engineering, food science among others. It also provides the evolutionary behavior of materials science for industrial applications. This book will be a useful resource for researchers as well as professionals interested in the highly interdisciplinary field of materials science.

Book Trends in Manufacturing and Engineering Management

Download or read book Trends in Manufacturing and Engineering Management written by S. Vijayan and published by Springer Nature. This book was released on 2020-08-19 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers presented at the International Conference on Mechanical Engineering Design (ICMechD) 2019. The volume focuses on the different design aspects involved in manufacturing, composite materials processing as well as in engineering management. A wide range of topics such as control and automation, mechatronics, robotics, composite and nanomaterial design, and welding design are covered here. The book also discusses current research in engineering management on topics like products, services and system design, optimization in design, manufacturing planning and control, and sustainable product design. Given the range of the contents, this book will prove useful to students, researchers and practitioners.

Book International Advanced Researches Engineering Congress 2017 Proceeding Book

Download or read book International Advanced Researches Engineering Congress 2017 Proceeding Book written by Recep HALICIOGLU and published by Dr. R. HALICIOGLU. This book was released on 2017-12-29 with total page 2770 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTERNATIONAL WORKSHOPS (at IAREC'17) (This book inclueds English (main) and Turkish languages) International Workshop on Mechanical Engineering International Workshop on Mechatronics Engineering International Workshop on Energy Systems Engineering International Workshop on Automotive Engineering and Aerospace Engineering International Workshop on Material Engineering International Workshop on Manufacturing Engineering International Workshop on Physics Engineering International Workshop on Electrical and Electronics Engineering International Workshop on Computer Engineering and Software Engineering International Workshop on Chemical Engineering International Workshop on Textile Engineering International Workshop on Architecture International Workshop on Civil Engineering International Workshop on Geomatics Engineering International Workshop on Industrial Engineering International Workshop on Food Engineering International Workshop on Aquaculture Engineering International Workshop on Agriculture Engineering International Workshop on Mathematics Engineering International Workshop on Bioengineering Engineering International Workshop on Biomedical Engineering International Workshop on Genetic Engineering International Workshop on Environmental Engineering International Workshop on Other Engineering Science

Book Advances in Materials and Manufacturing Engineering

Download or read book Advances in Materials and Manufacturing Engineering written by T. Rajmohan and published by Springer Nature. This book was released on 2020-09-21 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected papers from the Fourth International Conference on Materials and Manufacturing Engineering (ICMME 2019). The contents focus on the latest developments in the synthesis and characterization of new materials, and highlights the challenges involved in the manufacturing and machinability of different materials. Advanced and cost-effective manufacturing processes and their applications are also discussed in the book. In addition, it covers topics like robotics, fluid dynamics, design and development, and different optimization techniques. The contents of this book will be beneficial to students, researchers, and industry professionals.

Book Carbon Nanotubes

Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.

Book Advanced Materials and Manufacturing Engineering II

Download or read book Advanced Materials and Manufacturing Engineering II written by Ramya Muthusamy and published by Trans Tech Publications Ltd. This book was released on 2022-01-04 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 3rd International Conference on Materials Science and Manufacturing Technology (ICMSMT 2021) Selected peer-reviewed full text papers from the 3rd International Conference on Materials Science and Manufacturing Technology (ICMSMT 2021), April 08-09, 2021, Tamil Nadu, India

Book Processing and Characterization of Materials

Download or read book Processing and Characterization of Materials written by Snehanshu Pal and published by Springer Nature. This book was released on 2021-09-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected conference proceedings of Conference on Processing and Characterization of Materials (CPCM-2020). The content of the book includes processing of and characterization of materials, sustainable energy materials, defense materials, functionally graded materials, and composites which has significant impact on cutting-edge applications. The book also includes surface engineering, computational methods and materials, waste utilization, and corrosion and environmental degradation of materials. Design, research, and development studies, experimental investigations, theoretical analysis, and fabrication techniques relevant to the application of materials in various assemblies, ranging from individual components to complete structure are presented in the book. The book is useful for graduate students, researchers, and industry professionals alike.