Download or read book Swelling Properties of Montmorillonite and Beidellite Clay Minerals from Molecular Simulation written by and published by . This book was released on 2015 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The swelling properties of smectite clay minerals are relevant to many engineering applications including environmental remediation, repository design for nuclear waste disposal, borehole stability in drilling operations, and additives for numerous industrial processes and commercial products. We used molecular dynamics and grand canonical Monte Carlo simulations to study the effects of layer charge location, interlayer cation, and temperature on intracrystalline swelling of montmorillonite and beidellite clay minerals. For a beidellite model with layer charge exclusively in the tetrahedral sheet, strong ion-surface interactions shift the onset of the two-layer hydrate to higher water contents. In contrast, for a montmorillonite model with layer charge exclusively in the octahedral sheet, weaker ion-surface interactions result in the formation of fully hydrated ions (two-layer hydrate) at much lower water contents. Clay hydration enthalpies and interlayer atomic density profiles are consistent with the swelling results. As a result, water adsorption isotherms from grand canonical Monte Carlo simulations are used to relate interlayer hydration states to relative humidity, in good agreement with experimental findings.

Download or read book Molecular Dynamics Simulation of Crystalline Swelling and Failure Properties of Montmorillonite Clay written by Babak Abbasi and published by . This book was released on 2017 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay minerals play considerable importance in geotechnical, agricultural, and pharmaceutical applications. They are made of plate-like particles with micrometer dimensions and play a critical role in problems involving swelling, deformation, and failure in geomaterials. Understanding of these phenomena and the parameters that influence them requires studies at the nanoscale.

Download or read book Swelling of Clay Minerals written by Tim Jacobus Tambach and published by . This book was released on 2005 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Greenhouse Gases and Clay Minerals written by Vyacheslav Romanov and published by Springer. This book was released on 2017-10-19 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a systematic compilation of the most recent body of knowledge in the rapidly developing research area of greenhouse gas interaction with clay systems. Unexpected results of the most recent studies – such as unusually high sorption capacity and sorption hysteresis of swelling clays –stimulated theoretical activity in this fascinating field. Classical molecular dynamics (MD) explains swelling caused by intercalation of water molecules and to a certain degree of CO2 molecules in clay interlayer. However, unusual frequency shifts in the transient infrared fingerprints of the intercalated molecules and the following accelerated carbonation can be tackled only via quantum mechanical modeling. This book provides a streamlined (from simple to complex) guide to the most advanced research efforts in this field.

Download or read book Handbook of Clay Science written by and published by Newnes. This book was released on 2013-07-23 with total page 1748 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of the Handbook of Clay Science published in 2006 assembled the scattered literature on the varied and diverse aspects that make up the discipline of clay science. The topics covered range from the fundamental structures (including textures) and properties of clays and clay minerals, through their environmental, health and industrial applications, to their analysis and characterization by modern instrumental techniques. Also included are the clay-microbe interaction, layered double hydroxides, zeolites, cement hydrates, and genesis of clay minerals as well as the history and teaching of clay science. The 2e adds new information from the intervening 6 years and adds some important subjects to make this the most comprehensive and wide-ranging coverage of clay science in one source in the English language. - Provides up-to-date, comprehensive information in a single source - Covers applications of clays, as well as the instrumental analytical techniques - Provides a truly multidisciplinary approach to clay science

Download or read book Mineralogy written by Tibor Zoltai and published by . This book was released on 1984 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Swelling Properties of Some Montmorillonite Clays in Water Systems written by Dwayne Harold Fink and published by . This book was released on 1962 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Simulations of Hydration and Swelling in Clay Minerals written by Yu Wang and published by . This book was released on 2004 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Molecular Modeling of Clays and Mineral Surfaces written by James David Kubicki and published by . This book was released on 2003 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Science of Clays written by Swapna Mukherjee and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a comprehensive and coherent description of three widely separated aspects of clays: the science of clays; the industrial uses of clays; and the role of clays in the environment. Most of the existing literature lacks such an integrated study and this work endeavours to fill that gap. An exhaustive account of the science of clays is presented in Part I of the book, which includes the classification, origin and evolution, composition and internal structure, chemical and physical properties of clays; soil mechanics; and analytical techniques for determining clay constituents. Part II provides a comprehensive description of the applications of clays and their derivatives in various industries, while Part III describes the role of clays in the environment; the pollution caused by clay minerals; and the application of clays in order to prevent environmental hazards. A principal feature of the book is its explanation of how the structure and composition of particular clay types facilitate their specific industrial or environmental applications, thus describing the interrelationship between three widely varying aspects of clay. A number of thought-provoking questions are raised at the end of the work in order to leave readers with a better insight in this regard.

Download or read book A Pilot Study to the Application of Molecular Dynamics for Modelling Swelling clay Montmorillonite written by Owain Eason Gronow and published by . This book was released on 2010 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Minerals of the Montmorillonite Group written by Clarence Samuel Ross and published by . This book was released on 1945 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Advances in Colloid Science written by Mohammed Rahman and published by BoD – Books on Demand. This book was released on 2016-11-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book Advances in Colloid Science covers a number of up-to-date research advancement and progresses on colloids. It is a promising novel research field that has acknowledged a lot of interest recently. Here, the exciting scientific reports on cutting edge of science and technology associated to facile and economical synthesis, self-assembly, wettability, liquid crystallinity, physical properties, adoptions, morphology, control, drug design, structural properties, and prospective biological and optical implementation of newly designed colloids are concluded. This book presents an overview of recent and current colloidal study of fundamental and significant applications and implementation research worldwide. The colloidal science offers significant new and exciting challenges in biomedical, chemical, physical, and technological field. It is an important booklet for research organizations, governmental research centers, academic libraries, and R

Download or read book EPMESC VII written by E. Arantes e Oliveira and published by Elsevier. This book was released on 2012-12-02 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first EPMESC Conference took place in 1985. It was during the Conference, recognising the success it had been, that the promoters decided to organise other EPMESC conferences, giving birth to a new series of international meetings devoted to computational methods in engineering. The variety of subjects covered by the papers submitted to the 7th Conference demonstrates how much computational methods expanded and became richer in their applications to Science and Technology. New paradigms are being cultivated as non-numerical applications started to compete with the more traditional numerical ones. The scientific and technological communities to which the EPMESC Conferences used to be addressed themselves have changed.The two-volume Proceedings that we achieved to gather represent many of the interesting developments that are taking place, not only in the Asia Pacific Region, but also in some other scientifically advanced parts of the World, and cover a vast list of subjects grouped under the following headings: Applied Mathematics; Physics and Materials Science; Solid Mechanics; Finite Element and Boundary Element Methods; Structural Analysis; Structural Dynamics and Earthquake Engineering; Structural Engineering; Reinforced Concrete; Knowledge-Based Systems; Artificial Neural Networks and Genetic Algorithms; Computer-Aided Instruction; Computer-Aided Design and Computer-Aided Engineering; Geographic Information Systems; Environmental Applications; Road Engineering; Geotechnics; Soil Mechanics; Fluid Mechanics and Hydraulics.Two hundred and fifty one summaries were accepted, many of them with comments and restrictions, by the Programme Committee.From these, 153 papers resulted, many of them from Portuguese and Chinese origin, that were submitted to the revision of an international panel of referees from Australia, Belgium, Brazil, China, Italy, Macao, Portugal, Switzerland, United Kingdom and United States, to which we gladly acknowledge our gratitude and appreciation.

Download or read book Surface Complexation Modelling written by Johannes Lutzenkirchen and published by Elsevier. This book was released on 2006-09-02 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Complexation Modelling deals with various aspects associate to the modelling of solutes adsorption from of solutes from aqueous solutions to minerals. The individual contributions cover fundamental aspects and applications. Applications cover case studies and present consistent surface complexation parameter sets. The model approaches range from simplistic to mechanistic. More fundamental contributions address underlying phenomena or stress the opportunities of modern computational methods. Several mineral systems are covered, including goethite, gibbsite, clay minerals etc.Surface Complexation Modelling presents the state-of-the-art of surface complexation modelling and suggests ideas for further model development. A number of chapters are authored by scientists working on nuclear waste storage, where the retention of radionuclides contributes to preventing radionuclide migration from the repository to the biosphere. Other contributions come from soil and environmental chemists with an interest in reactive transport of pollutants in soils or aquifers. - Covering a wide range of disciplines - Bringing together contributions from experts in the field - Providing a balance between the theoretical and applied aspects

Download or read book Clays in the Minerals Processing Value Chain written by Markus Gräfe and published by . This book was released on 2017 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clays are increasingly becoming a major problem in the mining, extraction and value-adding processes for a wide range of commodity raw materials. Clays can impact negatively on virtually every unit process within the mining and minerals processing sector, having long-term environmental implications that go well beyond the lifetime of the mining operation. This book is the first to compile, explain and evaluate the effects of clays in the mineral processing value chain, from mining to minerals processing, and finally, tailings disposal. Focusing on topics from the chemistry and rheology of clays to their detection and dissolution behaviour, this book provides comprehensive coverage of the effects on processes such as settling, preg-robing, flotation and comminution. It is an excellent reference for professional mineralogists and geologists, industrial engineers, and researchers interested in clays and clay minerals.