Download or read book Surface Processing Laser Lamp Plasma written by J. Perrière and published by Elsevier Science. This book was released on 1999-03-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains both the invited and the contributed papers presented at the Symposium "Surface Processing: Laser, Lamp, Plasma" held during the annual Spring Meeting of the European Materials Research Society in Strasbourg, France, June 16-19 1998. Surface processing of materials using laser, lamp or plasma is one of the most active fields of research in Europe and, as such, requires to be periodically reviewed at International Conference level. This year, the expanded surface processing symposium lasted for 3.5 days and, as an international forum, addressed not only fundamental questions in the field but also progress and new perspectives in various applications. The major subjects discussed during the meeting included fundamental process studies, modelling of growth mechanisms and surface modification, characterization of synthesised or modified materials, material modification at a nanometric scale, development of in-situ analytical techniques and applications towards device fabrication. About 200 papers were presented by some 120 participants.
Download or read book Surface Processing written by I. W. Boyd and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Processing Laser Lamp Plasma written by Ian W. Boyd and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Processing Laser Lamp Plasma written by Symposium on Surface Processing: Laser, Lamp, Plasma. 1998, Strasbourg and published by . This book was released on 1998 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Processing and Characterization written by I.W. Boyd and published by Elsevier. This book was released on 1992-03-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this volume reflect not only the growing understanding of the underlying mechanisms controlling the various reactions in laser surface processing, but also the potential of several developing applications of direct processing. The most notable trend in the field currently is the technique of laser ablation, which is reported in almost a quarter of the papers in this volume. Whilst by no means a new phenomenon, attention has until recent years remained in the area of lithography and UV-sensitive materials. The growth in interest lies in the use of the technique to grow multi-component thin films and multi-layers. A number of papers on the topic of process diagnostics and in-situ measurements are also included. The theme of these annual meetings is centred around the physical and chemical modification of thin films and surfaces induced by the action of photon, ion, neutral, or electron beams in a variety of environments. Consequently these proceedings provide a comprehensive and unified presentation of the latest developments in this field.
Download or read book Surface Processing of Light Alloys Subject to Concentrated Energy Flows written by Xizhang Chen and published by Springer Nature. This book was released on 2021-01-22 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents studies on the surface modification of aluminum and titanium alloys by electric explosive alloying and electron-beam processing. It also describes and analyzes the physical mechanism of energy actions of these technologies on physical and mechanical properties and discusses their potential use in industry to improve the characteristics of finished products. The book is intended for specialists in the field of condensed matter physics, metallurgy and heat treatment and materials science, as well as graduate and senior students in relevant fields.
Download or read book Lasers written by Charles Blain and published by Nova Publishers. This book was released on 2002 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in lasers continue to enable progress in many areas such as eye surgery, the recording industry and dozens of others. This book presents citations from the book literature for the last 25 years and groups them for ease of access which is also provided by subject, author and titles indexes.
Download or read book Surface Processing and Laser Assisted Chemistry written by E. Fogarassy and published by Elsevier. This book was released on 1990-12-01 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume cover all aspects of laser assisted surface processing ranging from the preparation of high-Tc superconducting layer structures to industrial laser applications for device fabrication. The topics presented give recent results in organometallic chemistry and laser photochemistry, and novel surface characterization techniques. The ability to control the surface morphology by digital deposition and etching shows one of the future directions for exciting applications of laser surface processing, some of which may apply UV and VUV excitation. The understanding of elementary proceses is essential for the design of novel deposition methods, with diamond CVD being an outstanding example. The high quality of these contributions once again demonstrates that the E-MRS is an efficient forum for interaction between research workers and industry.
Download or read book Laser Applications in Surface Science and Technology written by Horst-Günter Rubahn and published by John Wiley & Sons. This book was released on 1999-03-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ob zur Oberflachenanalytik oder zur Oberflachenbearbeitung - die Einsatzgebiete von Lasern in der Materialwissenschaft werden standig erweitert. Dabei ablaufende Prozesse beschranken sich gelegentlich auf einfaches Erwarmen und Schmelzen, haufig finden jedoch kompliziertere Vorgange wie die Bildung von Plasma oder kollektive Anregungen statt. Verschiedenste Techniken, die zugehorigen physikalischen Grundlagen und alle wichtigen Prozesse beschreibt dieses Buch, wobei auch neueste Themen wie ultrakurze Laserpulse oder die nichtlineare Oberflachenspektroskpoie zur Sprache kommen. (05/99)
Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. Provides a broad overview on modern coating and thin film deposition techniques, and their applications Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films Each chapter includes experimental results illustrating various models, mechanisms or theories
Download or read book Laser Processing Surface Treatment and Film Deposition written by J. Mazumder and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis of nonequilibrium metallic phases has been an area of great interest to the materials processing community since early 1960. Inherent rapid cooling rates in laser processing are being used to engineer non-equilibrium microstructures which cannot be rivaled by other processes. This lecture will discuss the phenomena involved and its application in designing materials with tailored properties. What is non-equilibrium Synthesis? This is a synthesis method to produce binary or higher order materials where kinetics of the pro cess affects the transport of the constituent elements during phase transformation resulting in a composition or crystallographic configuration which is different from what is observed when the elements arranges themselves with the lowest possible Gibbs Free energy, which is the equilibrium condition. Figure 1 illustrates the phenomena. Phase diagram under equilibrium condition is illustrated by the solid line whereas the no-equilibrium phase diagram is represented by the dotted line. One can observe the shrinkage of the phase field under non-equilibrium condition. Any alloy composition between the solidus lines of the equilibrium and non-equilibrium phase diagram will be a non equilibrium alloys with extended solid solution.
Download or read book Materials Surface Processing written by Michael Stuke and published by North Holland. This book was released on 1993 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent trends and progress in the field of Materials Surface Processing by energetic radiation using lasers, lamps and/or synchrotron radiation are reviewed in this volume. All aspects of photon assisted materials surface processing, from basic studies to novel phenomena for applications and devices are discussed. Surface, interface and thin film reactions of dielectrics, semi- and super- conductors, metals, organic and biological materials are emphasized in terms of fundamental understanding and their criteria are assessed for future practical applications. The work will prove an indispensable reference source for all those interested in keeping abreast of the key issues in this unique area of Materials Surface Processing, ranging from basic phenomena to applications in industry.
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2010-11-30 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: The informal style of Laser Material Processing (4th Edition) will guide you smoothly from the basics of laser physics to the detailed treatment of all the major materials processing techniques for which lasers are now essential. • Helps you to understand how the laser works and to decide which laser is best for your purposes. • New chapters on laser physics, drilling, micro- and nanomanufacturing and biomedical laser processing reflect the changes in the field since the last edition, updating and completing the range of practical knowledge about the processes possible with lasers already familiar to established users of this well-known text. • Provides a firm grounding in the safety aspects of laser use. • Now with end-of-chapter exercises to help students assimilate information as they learn. • The authors’ lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford which will bring a smile to your face and ease the learning process.
Download or read book Plasma Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of materials is a critical technology to several of the largest manufacturing industries in the worldâ€"electronics, aerospace, automotive, steel, biomedical, and toxic waste management. This book describes the relationship between plasma processes and the many industrial applications, examines in detail plasma processing in the electronics industry, highlights the scientific foundation underlying this technology, and discusses education issues in this multidisciplinary field. The committee recommends a coordinated, focused, and well-funded research program in this area that involves the university, federal laboratory, and industrial sectors of the community. It also points out that because plasma processing is an integral part of the infrastructure of so many American industries, it is important for both the economy and the national security that America maintain a strong leadership role in this technology.
Download or read book Lasers in Surface Engineering written by Narendra B. Dahotre and published by ASM International. This book was released on 1998-01-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents various facets of laser surface treatment, emphasizing technologies that are expected to be important soon. The topics include fundamentals and types, surface texturing, heat treatment, metallic and intermetallic coating, the laser deposition of ceramic coatings, polymeric coatings, the cor
Download or read book Laser Material Processing written by William Steen and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Material Processing (2nd ed) by William M Steen is an updated and expanded version of the original which sold very well with reprints in 1994 and 1996. This new edition includes a whole extra chapter - Rapid Prototyping and Low Volume Manufacture - and updates other sections such as those dealing with types of industrial lasers and new applications, and recent developments in Surface Treatment and In-Process Sensing. It comprises some addtional 60-80 pages whilst retaining the value of the original edition. It provides the reader with an understanding of laser process mechanisms, methods of application, automation and In-Process Sensing and industrial potential. The use of Patrick Wright's humorous cartoons and the many diagrams and tables to illustrate points make it a very useful and lively reference guide for students at all stages. Since laser technology is a rapidly changing field this new updated and expanded version will be particularly topical.
Download or read book Ultraclean Surface Processing of Silicon Wafers written by Takeshi Hattori and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: A totally new concept for clean surface processing of Si wafers is introduced in this book. Some fifty distinguished researchers and engineers from the leading Japanese semiconductor companies, such as NEC, Hitachi, Toshiba, Sony and Panasonic as well as from several universities reveal to us for the first time the secrets of these highly productive institutions. They describe the techniques and equipment necessary for the preparation of clean high-quality semiconductor surfaces as a first step in high-yield/high-quality device production. This book thus opens the door to the manufacturing of reliable nanoscale devices and will be extremely useful for every engineer, physicist and technician involved in the production of silicon semiconductor devices.
