Download or read book Surface Modification by Solid State Processing written by Rosa M. Miranda and published by Woodhead Publishing. This book was released on 2018-11-13 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Modification by Solid State Processing describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, also changing surface chemistry. Surface conditions are increasingly demanding in industrial applications and surface modification can reduce manufacturing and maintenance costs, leading to improved component performance, reliability and lifetime. Friction-based technologies are promising solid state processing technologies, particularly for light alloys, in the manufacturing of composite surface and functionally graded materials This title is divided into five chapters, and after an introduction the book covers friction surfacing; friction stir processing; surface reinforcements of light alloys; and characterization techniques based on eddy currents. Describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, and change surface chemistry Emphasizes industrial applications Describes existing and emerging techniques

Download or read book Surface Modification to Improve Properties of Materials written by Miran Mozetič and published by MDPI. This book was released on 2019-04-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.

Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. - Provides a broad overview on modern coating and thin film deposition techniques, and their applications - Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films - Each chapter includes experimental results illustrating various models, mechanisms or theories

Download or read book Ion Beam Modification of Solids written by Werner Wesch and published by Springer. This book was released on 2016-07-14 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the method of ion beam modification of solids in realization, theory and applications in a comprehensive way. It provides a review of the physical basics of ion-solid interaction and on ion-beam induced structural modifications of solids. Ion beams are widely used to modify the physical properties of materials. A complete theory of ion stopping in matter and the calculation of the energy loss due to nuclear and electronic interactions are presented including the effect of ion channeling. To explain structural modifications due to high electronic excitations, different concepts are presented with special emphasis on the thermal spike model. Furthermore, general concepts of damage evolution as a function of ion mass, ion fluence, ion flux and temperature are described in detail and their limits and applicability are discussed. The effect of nuclear and electronic energy loss on structural modifications of solids such as damage formation, phase transitions and amorphization is reviewed for insulators and semiconductors. Finally some selected applications of ion beams are given.

Download or read book Plasma Surface Modification and Plasma Polymerization written by Norihiro Inagaki and published by CRC Press. This book was released on 2014-07-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In current materials R&D, high priority is given to surface modification techniques to achieve improved surface properties for specific applications requirements. Plasma treatment and polymerization are important technologies for this purpose. This book provides a basic and thorough presentation of this subject. This is probably the first book

Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.

Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.

Download or read book Tailoring Surfaces written by Nicholas D. Spencer and published by World Scientific. This book was released on 2011 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the book is the modification of surfaces to tailor them for a specific purpose. Using this method of surface modification, materials chosen for their bulk properties (tensile strength, temperature stability, density, price can be optimized for any particular application, which can lead to improved hardness, biological inertness or activity, corrosion resistance, low or high friction or adhesion, water repellency or wettability, or catalytic activity. The works of the author — many of his crucial papers are included — touches upon these surface properties and spans fields including catalysis, analytical surface science, self-assembled monolayers, tribology, biomaterials, superhydrophobicity and polymer coatings.

Download or read book Surface Modification by Solid State Processing written by Rosa M. Miranda and published by Woodhead Publishing. This book was released on 2013-10-31 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Modification by Solid State Processing describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, also changing surface chemistry. Surface conditions are increasingly demanding in industrial applications and surface modification can reduce manufacturing and maintenance costs, leading to improved component performance, reliability and lifetime. Friction-based technologies are promising solid state processing technologies, particularly for light alloys, in the manufacturing of composite surface and functionally graded materials This title is divided into five chapters, and after an introduction the book covers friction surfacing; friction stir processing; surface reinforcements of light alloys; and characterization techniques based on eddy currents. - Describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, and change surface chemistry - Emphasizes industrial applications - Describes existing and emerging techniques

Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications.After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components.With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. - Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components - Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys - Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components

Download or read book Surface Effects in Solid Mechanics written by Holm Altenbach and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the actual state of the art and future trends of surface effects in solid mechanics. Surface effects are more and more important in the precise description of the behavior of advanced materials. One of the reasons for this is the well-known from the experiments fact that the mechanical properties are significantly influenced if the structural size is very small like, for example, nanostructures. In this book, various authors study the influence of surface effects in the elasticity, plasticity, viscoelasticity. In addition, the authors discuss all important different approaches to model such effects. These are based on various theoretical frameworks such as continuum theories or molecular modeling. The book also presents applications of the modeling approaches.

Download or read book Modification of Polymer Properties written by Carlos Federico Jasso-Gastinel and published by William Andrew. This book was released on 2016-09-14 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of Polymer Properties provides, for the first time, in one title, the latest information on gradient IPNs and gradient copolymers. The book covers the broad range of polymer modification routes in a fresh, current view representing a timely addition to the technical literature of this important area. Historically, blends, copolymers, or filled polymers have been developed to meet specific properties, or to optimize the cost/properties relationship. Using the gradient structure approach with conventional radical polymerization, it has been shown that it is possible to optimize properties if appropriate gradients in the composition of copolymer chains are obtained. An overview of the gradient structure approach for designing polymers has not appeared in the recent literature and this title covers the different methods used to modify properties, offering the whole range of ways to modify polymers in just one volume and making this an attractive option for a wide audience of practitioners. The approach for each chapter is to explain the fundamental principles of preparation, cover properties modification, describe future research and applications as examples of materials that may be prepared for specific applications, or that are already in use, in present day applications. The book is for readers that have a basic background in polymer science, as well as those interested in the different ways to combine or modify polymer properties. - Provides an integrated view on how to modify polymer properties - Presents the entire panorama of polymer properties modification in one reference, covering the essential information in each topic - Includes the optimization of properties using gradients in polymers composition or structure

Download or read book Surface Modification and Mechanisms written by George E. Totten and published by CRC Press. This book was released on 2004-04-30 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Navigating through an extensive compilation of surface modification reactions and processes for specific tribological results, this reference compiles detailed studies, many not found in other texts, on various residual stresses, reaction processes and mechanisms, heat treatment methods, plasma-based techniques, laser impingement, nanometer scale surface modification, and more. Surface Modification and Mechanisms: Friction, Stress, and Reaction Engineering offers guidelines for the consideration and design of wear and frictional performance and provides a unique understanding of surface structural changes that occur during various engineering procedures.

Download or read book Modern Surface Engineering Treatments written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.

Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.

Download or read book Electro catalysis At Chemically Modified Solid Surfaces written by Jacques Simonet and published by World Scientific. This book was released on 2017-10-13 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents Professor Jacques Simonet's contribution to building new electrode materials and their related catalytic reactions. Research includes synthesis of new alloys of palladium, discovery of new composite electrodes (including gold- and silver-graphene) and the creation of new materials through judicious cathodic or anodic doping. Additionally, studies demonstrate the malleability and reactivity of previously unused precious and semi-precious metals for the creation of 2D and 3D catalytic materials. Studies key to innovative research show how transition metals may reversibly cathodically insert small size electro-active molecules such as CO2 and O2, and be applied to methods of depollution brought by carbon and nitrogen oxides.Written for practical use, Simonet has provided both theory and tools needed for those aiming to recreate and develop his experiments in electrochemical catalysis and surface modifications. This full publication of research gives graduate and post-graduate students of chemistry, electrochemistry and catalysis an in-depth insight into key historical and modern developments in the field.

Download or read book Metallurgical Coatings and Materials Surface Modifications written by H.E. Hintermann and published by Elsevier. This book was released on 1991-07-26 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this volume represent the work of over ninety international researchers from universities, government laboratories and industry, with diverse backgrounds and interests in a wide range of coatings and surface modifications processes. The seventy-three papers, including seven invited talks and thirty-eight oral communications attest to the fact that surface science and engineering is still a rapidly growing field which attracts experts from the large materials, scientific and technical community.