Download or read book Surface Engineering of Polymeric Biomaterials written by Todorka G Vladkova and published by Smithers Rapra. This book was released on 2013-01-10 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials work in contact with living matter and this gives a number of specific requirements for their surface properties, such as bioinertness or bioactivity, antibiofouling, and so on. Surface engineering based on physical, chemical, physical-chemical, biochemical or biological principles is important for the preparation of biomaterials with the desired biocontact properties. This book helps the reader gain the knowledge to enable them to work in such a rapidly developing area, with a comprehensive list of references given for each chapter. Strategies for tailoring the biological response through the creation of biomaterial surfaces resistant to fouling are discussed. Methods of eliciting specific biomolecular interactions that can be further combined with patterning techniques to engineer adhesive areas in a noninteractive background are also covered. The theoretical basis of surface engineering for improvement of biocontact properties of polymeric biomaterials as well as the current state-of-the-art of the surface engineering of polymeric biomaterials are presented. The book also includes information on the most used conventional and advanced surface engineering methods. The book is targeted at researchers, post-doctorates, graduate students, and those already working in the field of biomaterials with a special interest in the creation of polymeric materials with improved biocontact properties via surface engineering.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2001 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.

Download or read book Polymers for Biomedical Applications written by Anil Mahapatro and published by American Chemical Society. This book was released on 2008-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on applications of polymers for biomedical applications has increased dramatically to find improved medical plastics for this rapidly evolving field. This book brings together various aspects of recent research and developments within academia and industry related to polymers for biomedical applications.

Download or read book Biodegradable and Biocompatible Polymer Composites written by Navinchandra Gopal Shimpi and published by Woodhead Publishing. This book was released on 2017-09-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodegradable and Biocompatible Polymer Composites: Processing, Properties and Applications begins by discussing the current state-of-the-art, new challenges and opportunities for various biodegradable and biocompatible polymer composite systems. Interfacial characterization of composites and the structure-property relationships in various composite systems are explained in detail via a theoretical model. Processing techniques for various macro and nanocomposite systems and the influence of processing parameters on properties of the composite are also reviewed in detail. The characterization of microstructure, elastic, visco-elastic, static and dynamic mechanical, thermal, rheological, optical, and electrical properties are highlighted, as are a broad range of applications. The book is a useful reference resource for both researchers and engineers working in composites materials science, biotechnology and nanotechnology, and is also useful for students attending chemistry, physics, and materials science and engineering courses. - Presents recent outcomes and highlights the going importance of biodegradable and biocompatible polymer composites and their impact on the environment - Analyzes all the main processing techniques, characterization and applications of biodegradable composites - Written by leading international experts working in the field of biodegradable and biocompatible polymer composites - Covers a broad range of application fields, including medical and pharmaceutical, agricultural, packaging and transport

Download or read book Wetting and Wettability written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2015-12-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the liquid 's surface, the molecules have fewer neighbors in comparison with the bulk volume. As a result, the energy interaction shows itself in the surface tension. Traditionally, the surface tension can be assumed as a force in the unit of the length which can be counted by the unit of Newton on squared meter, or energy on the units of the surface. The surface tension, implies the interface between liquid and vapor, which is an example of the surface tensions. The equilibrium between these surface tensions, decides that a droplet on a solid surface, would have a droplet form or will change to layer form. This book collects new developments in wetting and wettability science.

Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.

Download or read book Evolution of Thin Film Morphology written by Matthew Pelliccione and published by Springer Science & Business Media. This book was released on 2008-01-29 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is on modeling and simulations used in research on the morphological evolution during film growth. The authors emphasize the detailed mathematical formulation of the problem. The book will enable readers themselves to set up a computational program to investigate specific topics of interest in thin film deposition. It will benefit those working in any discipline that requires an understanding of thin film growth processes.

Download or read book Modification of Polymer Properties written by Carlos Federico Jasso-Gastinel and published by William Andrew. This book was released on 2016-09-14 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of Polymer Properties provides, for the first time, in one title, the latest information on gradient IPNs and gradient copolymers. The book covers the broad range of polymer modification routes in a fresh, current view representing a timely addition to the technical literature of this important area. Historically, blends, copolymers, or filled polymers have been developed to meet specific properties, or to optimize the cost/properties relationship. Using the gradient structure approach with conventional radical polymerization, it has been shown that it is possible to optimize properties if appropriate gradients in the composition of copolymer chains are obtained. An overview of the gradient structure approach for designing polymers has not appeared in the recent literature and this title covers the different methods used to modify properties, offering the whole range of ways to modify polymers in just one volume and making this an attractive option for a wide audience of practitioners. The approach for each chapter is to explain the fundamental principles of preparation, cover properties modification, describe future research and applications as examples of materials that may be prepared for specific applications, or that are already in use, in present day applications. The book is for readers that have a basic background in polymer science, as well as those interested in the different ways to combine or modify polymer properties. - Provides an integrated view on how to modify polymer properties - Presents the entire panorama of polymer properties modification in one reference, covering the essential information in each topic - Includes the optimization of properties using gradients in polymers composition or structure

Download or read book Nano Antimicrobials written by Nicola Cioffi and published by Springer Science & Business Media. This book was released on 2012-02-26 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a high demand for antimicrobials for the treatment of new and emerging microbial diseases. In particular, microbes developing multidrug resistance have created a pressing need to search for a new generation of antimicrobial agents, which are effective, safe and can be used for the cure of multidrug-resistant microbial infections. Nano-antimicrobials offer effective solutions for these challenges; the details of these new technologies are presented here. The book includes chapters by an international team of experts. Chemical, physical, electrochemical, photochemical and mechanical methods of synthesis are covered. Moreover, biological synthesis using microbes, an option that is both eco-friendly and economically viable, is presented. The antimicrobial potential of different nanoparticles is also covered, bioactivity mechanisms are elaborated on, and several applications are reviewed in separate sections. Lastly, the toxicology of nano-antimicrobials is briefly assessed.

Download or read book Advanced Healthcare Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-05-09 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive and interdisciplinary view of cutting-edge research on advanced materials for healthcare technology and applications Advanced healthcare materials are attracting strong interest in fundamental as well as applied medical science and technology. This book summarizes the current state of knowledge in the field of advanced materials for functional therapeutics, point-of-care diagnostics, translational materials, and up-and-coming bioengineering devices. Advanced Healthcare Materials highlights the key features that enable the design of stimuli-responsive smart nanoparticles, novel biomaterials, and nano/micro devices for either diagnosis or therapy, or both, called theranostics. It also presents the latest advancements in healthcare materials and medical technology. The senior researchers from global knowledge centers have written topics including: State-of-the-art of biomaterials for human health Micro- and nanoparticles and their application in biosensors The role of immunoassays Stimuli-responsive smart nanoparticles Diagnosis and treatment of cancer Advanced materials for biomedical application and drug delivery Nanoparticles for diagnosis and/or treatment of Alzheimers disease Hierarchical modelling of elastic behavior of human dental tissue Biodegradable porous hydrogels Hydrogels in tissue engineering, drug delivery, and wound care Modified natural zeolites Supramolecular hydrogels based on cyclodextrin poly(pseudo)rotaxane Polyhydroxyalkanoate-based biomaterials Biomimetic molecularly imprinted polymers

Download or read book Plasma Surface Modification and Plasma Polymerization written by Norihiro Inagaki and published by CRC Press. This book was released on 2014-07-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In current materials R&D, high priority is given to surface modification techniques to achieve improved surface properties for specific applications requirements. Plasma treatment and polymerization are important technologies for this purpose. This book provides a basic and thorough presentation of this subject. This is probably the first book

Download or read book Cellular Response to Biomaterials written by Lucy Di Silvio and published by Elsevier. This book was released on 2008-12-22 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The response of cells to biomaterials is critical in medical devices. Traditionally inert biomaterials were used to minimise the reaction in cells in contact with the material. However, it has been realised that specific cell responses may be beneficial in such areas as encouraging adhesion, healing or cell multiplication. Cellular response to biomaterials discusses the response of cells to a wide range of biomaterials targeted at specific medical applications.Part one discusses cell responses to a variety of polymers and ceramics with chapters on such topics as degradable polymers and biocompatibility. Part two covers cell responses and regenerative medicine with coverage of themes such as vascular grafts, nerve repair and Bioglass®. Part three examines the effect of surfaces and proteins on cell response. Specific chapters review nano-engineered surfaces, the influence of plasma proteins on bone cell adhesion and surface modification of titanium implants.With its distinguished editor and team of international contributors, Cellular response to biomaterials is an essential read for those researching or studying medical devices in industry and academia. - Examines the response of cells to a wide range of biomaterials targeted at specific medical applications - Discusses cell responses and regenerative medicine with specific chapters on vascular grafts and nerve repair - Assesses the effect of surfaces and proteins on cell response including the influence of plasma proteins on cell adhesion and surface modification of titanium implants

Download or read book Hydroxyapatite Coatings for Biomedical Applications written by Sam Zhang and published by CRC Press. This book was released on 2013-05-14 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydroxyapatite coatings are of great importance in the biological and biomedical coatings fields, especially in the current era of nanotechnology and bioapplications. With a bonelike structure that promotes osseointegration, hydroxyapatite coating can be applied to otherwise bioinactive implants to make their surface bioactive, thus achieving faster healing and recovery. In addition to applications in orthopedic and dental implants, this coating can also be used in drug delivery. Hydroxyapatite Coatings for Biomedical Applications explores developments in the processing and property characterization and applications of hydroxyapatite to provide timely information for active researchers and newcomers alike. In eight carefully reviewed chapters, hydroxyapatite experts from the United States, Japan, Singapore, and China present the latest on topics ranging from deposition processes to biomedical applications in implants and drug delivery. This book discusses: Magnetron sputtering and electrochemical deposition The modification of hydroxyapatite properties by sol–gel deposition to incorporate other elements found in natural bones, such as zinc, magnesium, and fluorine The use of pure hydroxyapatite in drug delivery applications The growth or self-assembly of hydroxyapatite on shape memory alloy Hydroxyapatite composite coatings—with carbon nanotubes, titanium dioxide (TiO2), and others—on the titanium alloy Offering valuable insights and a wealth of data, including numerous tables and figures, this is a rich source of information for research on hydroxyapatite coatings. Each chapter also covers material that provides an accessible stepping stone for those who are new to the field.

Download or read book Laser Surface Modification of Biomaterials written by Rui Vilar and published by Woodhead Publishing. This book was released on 2016-04-15 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Surface Modification of Biomaterials: Techniques and Applications covers this expanding field, which has many potential applications, including biomaterials. Laser surface modification of biomaterials enables the production of hybrid materials with different functionality in the bulk as well as the thin, sub-micrometer surface layer. This book will provide readers with a comprehensive review of the technology and its applications. Chapters in Part 1 look at the techniques and considerations of laser surface modification, while Part 2 reviews laser surface modification techniques of the most important classes of biomaterials, with a final set of chapters discussing application specific laser surface modification. - Offers a comprehensive review of laser surface modification techniques - Presents recent developments, fundamentals, and progress in laser surface modification - Reviews laser surface modification applications across a range of materials - Emphasizes applications in biomaterials

Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. This third volume covers modern applications in engineering and technology, including all new and updated case studies spanning telecommunications and data storage to medicine, optical measurement, defense and security, nanomaterials processing and characterization. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.

Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.