Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.
Download or read book Surface modification and alloying by laser ion and electron beams written by J. M. Poate and published by Plenum Pub Corp. This book was released on 1983 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer. This book was released on 1983-06-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.
Download or read book Electron Ion Plasma Modification of a Hypoeutectoid Al Si Alloy written by Dmitrii Zaguliaev and published by CRC Press. This book was released on 2020-09-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Ion-Plasma Modification of a Hypereutectic Al-Si Alloy details theoretical and experimental research and computer simulation of structural phase transformations in AlSi10Mn2Ni Silumin on different scale levels under electroexplosion alloying, electron beam processing and electron-plasma alloying at the nanolevel in order to create new materials. The authors summarize and analyze more than 10 years of research on the electron-ion-plasma effect on strength properties and structure-phase states’ transformations of hypoeutectic Silumin. Key Features: Details physical and mathematical models of mechanisms of surface layer hardening under conditions of varying energy effects Offers insights into improved strength characteristics of Silumin Explores optimal processing modes for increased strength and improved tribological characteristics This book is a valuable resource to researchers and engineers involved with the modification of light alloy surfaces for the automotive and aeronautical industry.
Download or read book Surface Modification and Alloying by Laser Ion and Elect Beams Proc NATO Adv Study Inst Held Trevi Aug 24 28 written by J. M. Poate and published by . This book was released on 1983 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Processing of Light Alloys Subject to Concentrated Energy Flows written by Xizhang Chen and published by Springer Nature. This book was released on 2021-01-22 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents studies on the surface modification of aluminum and titanium alloys by electric explosive alloying and electron-beam processing. It also describes and analyzes the physical mechanism of energy actions of these technologies on physical and mechanical properties and discusses their potential use in industry to improve the characteristics of finished products. The book is intended for specialists in the field of condensed matter physics, metallurgy and heat treatment and materials science, as well as graduate and senior students in relevant fields.
Download or read book Surface Alloying by Ion Electron and Laser Beams written by L. E. Rehn and published by ASM International(OH). This book was released on 1987 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications. After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components. With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components
Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. Provides a broad overview on modern coating and thin film deposition techniques, and their applications Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films Each chapter includes experimental results illustrating various models, mechanisms or theories
Download or read book Laser Surface Treatment of Metals written by C.W. Draper and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, San Miniato, Italy, September 2-13, 1985
Download or read book Materials Processing Technology II written by Lian Cheng Zhao and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 3680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprises papers selected from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) which was held on the 15th to 17th June 2012 in Zhuhai, China. The peer-reviewed papers are grouped into sixteen chapters: Thin Films; Surface Engineering/Coatings; Modeling, Analysis and Simulation; Materials Forming; Materials Machining; Welding and Joining; Mechanical Behavior and Fracture; Computer Aided Material Design; Laser Processing Technology; Theory and Application of Friction and Wear; Dynamic Mechanical Analysis, Optimization and Control; Thermal Engineering Theory and Applications; Precision Manufacturing Technology and Measurements; Material Physics and Chemistry; Dynamic Analysis of Processing; Advanced Design Technology.
Download or read book Tool Steels 5th Edition written by George Adam Roberts and published by ASM International. This book was released on 1998 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Advanced Surface Engineering Research written by Mohammad Asaduzzaman Chowdhury and published by BoD – Books on Demand. This book was released on 2018-11-14 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering has rapidly expanded in recent years as the demand for improved materials has increased. Surface engineering is a valuable tool for conceiving both surface and bulk properties, which cannot be achieved simultaneously either by the coating material or by the substrate material alone. The book is written on the current trends of surface engineering and relevant research. The applied and basic research as well as some worthy concepts of materials related to this area is explained clearly to understand the need for surface engineering in industrial applications. The different surface modification processes, properties, and their characterizations are discussed elaborately for future research and as a text book. Modification of surface properties by films or coatings is used in industrial applications. This is an area of interest to numerous fields: fabrication of parts, mechanics, transport, catalysis, energy, production, microelectronics, optoelectronics, the leisure industry, etc. The properties are considered for protection against corrosion, oxidation or wear, biocompatibility, wetting, adhesion, durability, catalytic activity, and toughness. The modern concept of engineering is discussed to ensure that the contributions of this subject minimize energy consumption. The book will be used as a state of the art for present and future researchers, industrial components design, and control.
Download or read book Surface Modification of Metals by Ion Beams 7 written by and published by . This book was released on 1992 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amorphous Metallic Alloys written by BURTON and published by Elsevier. This book was released on 2013-10-22 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous Metallic Alloys covers the preparation and properties of alloys produced by rapid quenching from the molten state. This book focuses on three technologically important classes of magnetic amorphous alloy—transition metal-metalloid (TM-M) alloys, rare earth-transition metal (RE-TM) alloys, and transition metal-zirconium or hafnium alloys (TM-Zr-Hf). The melt-quenched transition metal-metalloid and transition metal-zirconium type alloys are also emphasized. This text likewise explains in detail how amorphous atomic structure affects magnetic, mechanical, chemical, corrosion, and electrical characteristics. Other topics include glass forming ability in metallic materials, scattering theory of amorphous metals, dynamics of inhomogeneous plastic flow, and powder production processes. This publication is intended for students and researchers conducting work on amorphous metallic alloys.