Download or read book Surface Infrared and Raman Spectroscopy written by W. Suëtaka and published by Springer Science & Business Media. This book was released on 1995-05-31 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with engineers and researchers in mind, author W. Suëtka offers a well-illustrated, basic reference on the use of infrared (IR) and Raman spectroscopy in the investigation of surfaces of practical materials. This book only requires a basic knowledge of vibrational spectroscopy for understanding the included discussions. Chapters illustrate applications of IR and Raman spectroscopy in the investigation of a variety of real surfaces. Featured in this volume are the typical results obtained for species on clean and well-defined surfaces in ultrahigh vacuum environments.
Download or read book Surface Enhanced Vibrational Spectroscopy written by Ricardo Aroca and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Enhanced Vibrational Spectroscopy (SEVS) has reached maturity as an analytical technique, but until now there has been no single work that describes the theory and experiments of SEVS. This book combines the two important techniques of surface-enhanced Raman scattering (SERS) and surface-enhanced infrared (SEIR) into one text that serves as the definitive resource on SEVS. Discusses both the theory and the applications of SEVS and provides an up-to-date study of the state of the art Offers interpretations of SEVS spectra for practicing analysts Discusses interpretation of SEVS spectra, which can often be very different to the non-enhanced spectrum - aids the practicing analyst
Download or read book Infrared and Raman Spectroscopy in Forensic Science written by John M. Chalmers and published by John Wiley & Sons. This book was released on 2012-03-05 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide a survey of the major areas in which information derived from vibrational spectroscopy investigations and studies have contributed to the benefit of forensic science, either in a complementary or a unique way. This is highlighted by examples taken from real case studies and analyses of forensic relevance, which provide a focus for current and future applications and developments.
Download or read book Surface Infrared and Raman Spectroscopy written by W. Suëtaka and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: are intended to fill the gap between a manufacturer's handbook, and review articles that highlight the latest scientific developments. A fourth volume will deal with techniques for specimen handling, beam artifacts, and depth profiling. It will provide a compilation of methods that have proven useful for specimen handling and treatment, and it will also address the common artifacts and problems associated with the bombardment of solid sur faces by photons, electrons, and ions. A description will be given of methods for depth profiling. Surface characterization measurements are being used increasingly in di verse areas of science and technology. We hope that this series will be useful in ensuring that these measurements can be made as efficiently and reliably as possible. Comments on the series are welcomed, as are suggestions for volumes on additional topics. C. J. Powell Gaithersburg, Maryland A. W. Czandema Golden, Colorado D. M. Hercules Pittsburgh, Pennsylvania T. E. Madey New Brunswick, New Jersey J. T. Yates, Jr.
Download or read book Infrared and Raman Spectroscopy written by Bernhard Schrader and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an excellent introduction to vibrational spectroscopy for scientists in academia and industry. Both infrared and Raman spectroscopy are covered comprehensively and up-to-date. Therefore the book may also be used as a handbook for easy reference. Written in the language of chemists, it explains the basic theory and instrumentation, the interpretation and evaluation of spectra. Furthermore numerous, worked-out examples of practical applications are presented. Therefore the reader is enabled to apply infrared and Raman spectroscopy for solving his own problem and to design suitable experimental procedures. This book also serves as a guide to the relevant literature
Download or read book Polypropylene written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: My heart sank when I was approached by Dr Hastings and by Professor Briggs (Senior Editor of Materials Science and Technology and Series Editor of Polymer Science and Technology Series at Chapman & Hall, respectively) to edit a book with the provisional title Handbook of Poly propylene. My reluctance was due to the fact that my former book [1] along with that of Moore [2], issued in the meantime, seemed to cover the information demand on polypropylene and related systems. Encour aged, however, by some colleagues (the new generation of scientists and engineers needs a good reference book with easy information retrieval, and the development with metallocene catalysts deserves a new update!), I started on this venture. Having some experience with polypropylene systems and being aware of the current literature, it was easy to settle the titles for the book chapters and also to select and approach the most suitable potential contributors. Fortunately, many of my first-choice authors accepted the invitation to contribute. Like all editors of multi-author volumes, I recognize that obtaining contributors follows an S-type curve of asymptotic saturation when the number of willing contributors is plotted as a function of time. The saturation point is, however, never reached and as a consequence, Dear Reader, you will also find some topics of some relevance which are not explicitly treated in this book (but, believe me, I have considered them).
Download or read book Infrared and Raman Spectroscopic Imaging written by Reiner Salzer and published by John Wiley & Sons. This book was released on 2009-03-17 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comparison of the strengths and weaknesses of near-infrared, infrared and Raman imaging, focusing on current as well as conceivable applications for chemical analysis in delicate natural and synthetic samples. This handbook and ready reference covers instrumentation for vibrational spectroscopic imaging, chemometric evaluation of spectroscopic images, and vibrational spectroscopic imaging in biology and medicine, as well as the chemical, pharmaceutical and food industries.
Download or read book Vibrational Spectroscopy in Life Science written by Friedrich Siebert and published by John Wiley & Sons. This book was released on 2008-07-15 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors describe basic theoretical concepts of vibrational spectroscopy, address instrumental aspects and experimental procedures, and discuss experimental and theoretical methods for interpreting vibrational spectra. It is shown how vibrational spectroscopy provides information on general aspects of proteins, such as structure, dynamics, and protein folding. In addition, the authors use selected examples to demonstrate the application of Raman and IR spectroscopy to specific biological systems, such as metalloproteins, and photoreceptors. Throughout, references to extensive mathematical and physical aspects, involved biochemical features, and aspects of molecular biology are set in boxes for easier reading. Ideal for undergraduate as well as graduate students of biology, biochemistry, chemistry, and physics looking for a compact introduction to this field.
Download or read book Near Field Optics and Surface Plasmon Polaritons written by Satoshi Kawata and published by Springer Science & Business Media. This book was released on 2001-06-20 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date overview describes in detail the physics of localized surface plasmon polaritons excited near fine metallic structures and the principles of near-field optics and microscopy related to this localized field. It also covers wider fields, from local spectroscopy to atom manipulation.
Download or read book Infrared and Raman Spectroscopy written by Edward Brame and published by CRC Press. This book was released on 1977-05-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Enhanced Raman Scattering written by Richard Chang and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the course of the development of surface science, advances have been identified with the introduction of new diagnostic probes for analytical characterization of the adsorbates and microscopic structure of surfaces and interfaces. Among the most recently de veloped techniques, and one around which a storm of controversy has developed, is what has now been earmarked as surface enhanced Raman scattering (SERS). Within this phenomenon, molecules adsorbed onto metal surfaces under certain conditions exhibit an anomalously large interaction cross section for the Raman effect. This makes it possible to observe the detailed vibrational signature of the adsorbate in the ambient phase with an energy resolution much higher than that which is presently available in electron energy loss spectroscopy and when the surface is in contact with a much larger amount of material than that which can be tolerated in infrared absorption experiments. The ability to perform vibrational spectroscopy under these conditions would lead to a new understanding about the chemical identity, geome try, and bonding of adsorbed material at a level previously unacces sible. It is for these reasons that the last few years have brought an explosion of activity surrounding the exploitation of SERS. The search for the origines) of the anomalous enhancement has given rise to a research sub-activity of its own. Efforts to explain the en hancement have led to an increased understanding of the whole range of phenomena associated with the interaction of photons with adsor bates and metal surfaces.
Download or read book Infrared and Raman Spectroscopy written by Peter Larkin and published by Elsevier. This book was released on 2017-11-13 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Raman Spectroscopy, Principles and Spectral Interpretation, Second Edition provides a solid introduction to vibrational spectroscopy with an emphasis on developing critical interpretation skills. This book fully integrates the use of both IR and Raman spectroscopy as spectral interpretation tools, enabling the user to utilize the strength of both techniques while also recognizing their weaknesses. This second edition more than doubles the amount of interpreted IR and Raman spectra standards and spectral unknowns. The chapter on characteristic group frequencies is expanded to include increased discussions of sulphur and phosphorus organics, aromatic and heteroaromatics as well as inorganic compounds. New topics include a discussion of crystal lattice vibrations (low frequency/THz), confocal Raman microscopy, spatial resolution in IR and Raman microscopy, as well as criteria for selecting Raman excitation wavelengths. These additions accommodate the growing use of vibrational spectroscopy for process analytical monitoring, nanomaterial investigations, and structural and identity determinations to an increasing user base in both industry and academia. - Integrates discussion of IR and Raman spectra - Pairs generalized IR and Raman spectra of functional groups with tables and text - Includes over 150 fully interpreted, high quality IR and Raman reference spectra - Contains fifty-four unknown IR and Raman spectra, with a corresponding answer key
Download or read book Spectroscopic Properties of Inorganic and Organometallic Compounds written by Jack Yarwood and published by Royal Society of Chemistry. This book was released on 2013-05-24 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopic Properties of Inorganic and Organometallic Compounds: Techniques, Materials and Applications provides a unique source of information in an important area of chemistry. Since Volume 40 the nature and ethos of this series have been altered to reflect a change of emphasis towards 'Techniques, Materials and Applications'. Researchers will now find up-to-date critical reviews which provide in-depth analyses of the leading papers in the field, with authors commenting of the quality and value of the work in a wider context. Focus areas will include structure-function relationships, photochemistry and spectroscopy of inorganic complexes, and catalysis; materials such as ceramics, cements, pigments, glasses and corrosion products; techniques such as advanced laser spectroscopy and theoretical methods.
Download or read book Adsorption of Molecules at Metal Electrodes written by Jacek Lipkowski and published by Wiley. This book was released on 1992-08-05 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise introduction to molecular adsorption at electrified interfaces summarizes the past decade's advances in the field. A balanced selection of chapters describes thermodynamic, dynamic and molecular properties of adsorbed molecules, written by physicists, chemists, experimentalists and theorists.
Download or read book Analytical Instrumentation Handbook written by Jack Cazes and published by CRC Press. This book was released on 2004-11-30 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by the editor of Dekker's distinguished Chromatographic Science series, this reader-friendly reference is as a unique and stand-alone guide for anyone requiring clear instruction on the most frequently utilized analytical instrumentation techniques. More than just a catalog of commercially available instruments, the chapters are wri
Download or read book Infrared and Raman Spectroscopy in Forensic Science written by John M. Chalmers and published by John Wiley & Sons. This book was released on 2012-01-03 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide a survey of the major areas in which information derived from vibrational spectroscopy investigations and studies have contributed to the benefit of forensic science, either in a complementary or a unique way. This is highlighted by examples taken from real case studies and analyses of forensic relevance, which provide a focus for current and future applications and developments.
Download or read book Raman Infrared and Near Infrared Chemical Imaging written by Slobodan Sasic and published by John Wiley & Sons. This book was released on 2011-09-14 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: An all-inclusive guide on the analytical methods of Raman, infrared, and near-infrared chemical imaging An underutilized technology, chemical imaging through Raman, infrared (IR), and near-infrared (NIR) is beginning to gain recognition for its non-destructive method of permitting visualization of spatially resolved chemical information. This type of analysis is triggering a groundswell of demand as manufactured materials become more complex and the need for greater scrutiny and less damaging research practices is at a premium. Concentrating on the applications of chemical imaging, this book presents a thorough background on the theory, software, and hardware employed in this analytical technique. With full examination of this rapidly growing field, this book: Combines many different aspects and applications into one comprehensive volume Discusses how chemical imaging techniques have expanded greatly in terms of instruments and applications, but have lagged in general awareness among scientists and industries that would benefit the most from them Describes chemical imaging uses in key areas—biomedical, pharmaceutical, food, and polymer research Has chapters that outline hardware and instrumentation for the different methods of chemical imaging Encapsulating analytic methods without complicating the subject matter, this book shows where chemical imaging has been successfully applied, inspiring researchers to cultivate the exciting capabilities rooted within this powerful and multifaceted technology.
