Download or read book Surface Emitting Semiconductor Lasers and Arrays written by Gary A. Evans and published by . This book was released on 1993 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews all the basic types of surface emitting semiconductor lasers, including vertical cavity, etched-mirror integrated beam deflectors and grating out-coupled devices. The book also addresses such topics as edge-emitting arrays, thermal management and coherence.
Download or read book Monolithic Diode Laser Arrays written by Nils W. Carlson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although semiconductor-diode lasers are the most compact, highest gain and most efficient laser sources, difficulties remain in developing structures that will produce high-quality, diffraction-limited output beams. Indeed, only a few designs have emerged with the potential for producing high-power, high-brightness monolithic sources. This book presents and analyzes the results of work performed over the past two decades in the development of such diode-laser arrays.
Download or read book Modeling of DFB Surface Emitting Lasers and Semiconductor Laser Arrays written by Shing Man Lee and published by . This book was released on 1991 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical modeling of novel semiconductor laser systems, i.e., distributed-feedback (DFB) surface emitting lasers and semiconductor laser arrays, is presented. The DFB surface emitting lasers can produce stable single-mode outputs even under high bit-rate direct modulation and form two-dimensional laser arrays. A simple and accurate analytical model using the coupled-mode theory is developed to describe these surface emitting lasers. Due to the simplicity of the model, the desired laser output characteristics, i.e., low threshold condition, large side mode suppression ratio, and stable and low noise Bragg-mode outputs, can be obtained by systematically optimizing the device length, optical coupling and phase shifter in the device. The nonplanar laser arrays are of much interest because of their simple fabricating procedures and very high output power. A theoretical study is performed to understand the efficiency and far-field and near-field patterns. A number of important physical mechanisms for high power semiconductor laser operations are studied using a self-consistent model. These include the two-dimensional current spreading in the cladding layers, the coupling between the carrier distribution and the photon distribution, and the carrier saturation effects at high power operation. The mesas, bends, and grooves are treated as adjacent waveguides, each described by the effective index method. The output field patterns in the nonplanar laser structures are composed of a linear combination of the individual waveguide modes. The multimode operation in practical devices can be explained by spatial hole burning effects, nonuniform current injection, and competition for available carriers in the neighboring waveguides between different optical modes. The possibility of obtaining phase-locked output by reducing the groove depth is also investigated. A finite-difference time-domain (FDTD) model is used to study the radiation losses due to the bend. A groove depth as small as 0.1 $mu$m can be used for maximum optical coupling while the bending loss is still large enough to suppress the lateral lasing operation in the nonplanar laser array. The highest semiconductor laser output powers have been achieved by the laser arrays employing optical turning mirrors. The effects of the rough turning mirrors on the laser array performance are estimated using the FDTD method. A number of steps are employed to reduce the computation time on these very large mirrors (about sixty wavelengths) to make the FDTD model a possible computer-aided design tool. The computation time is reduced by a factor of twenty.
Download or read book Diode Laser Arrays written by Dan Botez and published by Cambridge University Press. This book was released on 1994-07-28 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of the principles and uses of semiconductor diode laser arrays. Coherent, incoherent, edge- and surface-emitting, horizontal- and vertical-cavity, individually addressed, lattice-matched and strained-layer arrays are all discussed in detail.
Download or read book Vertical cavity Surface emitting Laser Arrays written by Jack L. Jewell and published by . This book was released on 1994 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication Issues and Considerations for High Performance Grating Surface Emitting Semiconductor Lasers written by G. A. Evans and published by . This book was released on 1992 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: A sketch of a grating-surface-emitting (GSE) laser is shown. The gratings between the gain sections provide feedback for laser oscillation in second order and couple out the laser radiation perpendicular to the surface in both directions in first order. With proper choice of grating parameters, a portion of the light is passed completely through each grating section and serves to injection lock additional gain sections in the longitudinal direction. GSE laser array technology has experienced steady progress over the last two years. Improvements in material quality and uniformity have made it possible to coherently couple two dimensional GSE lasers over distances larger than 1 cm. Figure 2a shows a peak output of 32 W per surface with differential quantum efficiencies of 40 % per surface during pulsed operation. The same device provides a continuous power output of 3.4 W per surface, as shown in Fig. 2b. Variations on the basic GSE laser concept have resulted in Master Oscillator Power Amplifier (MOPA) GSE arrays and continuous grating (CG)-GSE laser arrays. GSE arrays with 10 elements per gain section and 20 gain sections have obtained cw threshold current densities of under 140 A/cm2 with cw differential quantum efficiencies of 20 to 30% per surface. Linewidths in the 40 to 100 MHz range have been obtained with output powers of 100 to 250 mW/surface.
Download or read book Current Trends in Vertical Cavity Surface Emitting Lasers written by Tien-Pei Lee and published by World Scientific. This book was released on 1995 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: With significant progress made in recent years, vertical cavity surface emitting lasers (VCSELs) have emerged as potential lightwave sources with a variety of applications, including high speed optical interconnects, parallel data links, optical recording, 2-D scanning, and optical signal processing. This volume, which contains a collection of articles by outstanding experts on this topic, encompasses a broad discussion of the current trends in the development of VCSELs. Discussions include material growths, structure designs, processing methods, performance analysis, improvement strategies, and future prospects. The collection provides a comprehensive overview that may help newcomers to this field as well as engineers and researchers who are engaged in the research and development of this new exciting device family.
Download or read book Vertical Cavity Surface Emitting Lasers written by Terence Edward Sale and published by Wiley-Blackwell. This book was released on 1995 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from basic principles, this book provides coverage of the operation and design of Vertical Cavity Surface Emitting Lasers (VCSELs). It includes original experimental work, backed up by calculations and theoretical analysis, and reviews work already done in the field.
Download or read book High coherent power Two dimensional Grating Surface emitting GSE Semiconductor Lasers written by Shuang Li and published by . This book was released on 2006 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vertical Cavity Surface Emitting Lasers written by Julian Cheng and published by CRC Press. This book was released on 2000-07-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since first coming into existence in the early 90s, the vertical-cavity surface-emitting laser (VCSEL) has made several quantum leaps in performance. The performance of VCSELs now exceeds that of edge-emitting lasers in many respects, and offers a superior optical beam and much easier monolithic integrability. As the VCSEL technology improves furth
Download or read book Analysis and Design of Vertical Cavity Surface Emitting Lasers written by S. F. Yu and published by John Wiley & Sons. This book was released on 2003-09-04 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, hands-on guidebook for the efficient modeling of VCSELs Vertical Cavity Surface Emitting Lasers (VCSELs) are a unique type of semiconductor laser whose optical output is vertically emitted from the surface as opposed to conventional edge-emitting semiconductor lasers. Complex in design and expensive to produce, VCSELs nevertheless represent an already widely used laser technology that promises to have even more significant applications in the future. Although the research has accelerated, there have been relatively few books written on this important topic. Analysis and Design of Vertical Cavity Surface Emitting Lasers seeks to encapsulate this growing body of knowledge into a single, comprehensive reference that will be of equal value for both professionals and academics in the field. The author, a recognized expert in the field of VCSELs, attempts to clarify often conflicting assumptions in order to help readers achieve the simplest and most efficient VCSEL models for any given problem. Highlights of the text include: * A clear and comprehensive theoretical treatment of VCSELs * Detailed derivations for understanding the operational principles of VCSELs * Mathematical models for the investigation of electrical, optical, and thermal properties of VCSELs * Case studies on the mathematical modeling of VCSELs and the implementation of simulation programs
Download or read book Integrated Surface Emitting Laser Arrays with Flat Tip Microprohes for the Near Field Optical Data Storage written by Young J. Kim and published by . This book was released on 2001 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current optical data storage is challenging to increase its memory capacity and data transfer rate for realizing high-quality image and rapid service in the coming digital, multimedia and network era. To actualize more effective and simple data storage, a novel parallel near-field optical system has been proposed using vertical cavity surface emitting laser (VCSEL) microprobe arrays. The new parallel optical system is based a multibeam recording head consisting of a VCSEL array with apertures of nanometer size as a near-field wave exit. We have developed some candidates for the parallel recording head, including the direct aperture formation on the VCSEL emitting surface and the preparation of microprobe arrays with flat-tip structure. The new flat-tip microprobe array has advantages for improving the optical efficiency and stabilizing the contact head system with optical media since it is prepared from semiconductor materials of high refractive index. Silicon nano-aperture probe array has been prepared successfully with the aperture size of 150 to 500 nm using micro-fabrication techniques. We have also investigated the integrated microprobe array by the direct fabrication of flat-tip probes on the substrate of bottom emitting VCSEL arrays. Finally the reading mechanism has been studied theoretically using a finite difference time domain (FDTD) simulation and an optical feedback effect of semiconductor lasers for the integrated microprobe VCSEL array. We believe this nano-aperture VCSEL probe array is sufficiently effective to be applied to the parallel recording head for the near-field optical data storage of a high data capacity and fast transfer rate.
Download or read book Advances in Semiconductor Lasers written by and published by Academic Press. This book was released on 2012-06-12 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. Originally widely known as the "Willardson and Beer" Series, it has succeeded in publishing numerous landmark volumes and chapters. The series publishes timely, highly relevant volumes intended for long-term impact and reflecting the truly interdisciplinary nature of the field. The volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in academia, scientific laboratories and modern industry. The series publishes timely, highly relevant volumes intended for long-term impact and reflecting the truly interdisciplinary nature of the field
Download or read book Visible wavelength Semiconductor Lasers and Arrays written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A visible semiconductor laser. The visible semiconductor laser includes an InAlGaP active region surrounded by one or more AlGaAs layers on each side, with carbon as the sole p-type dopant. Embodiments of the invention are provided as vertical-cavity surface-emitting lasers (VCSELs) and as edge-emitting lasers (EELs). One or more transition layers comprised of a substantially indium-free semiconductor alloy such as AlAsP, AlGaAsP, or the like may be provided between the InAlGaP active region and the AlGaAS DBR mirrors or confinement layers to improve carrier injection and device efficiency by reducing any band offsets. Visible VCSEL devices fabricated according to the invention with a one-wavelength-thick (1.lambda.) optical cavity operate continuous-wave (cw) with lasing output powers up to 8 mW, and a peak power conversion efficiency of up to 11%.
Download or read book Semiconductor Science and Technology Vol 1 written by V. Stefan and published by Stefan University Press. This book was released on 2002 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vertical cavity Surface emitting Lasers written by and published by . This book was released on 2002 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coherent Laser Arrays from Bottom surface Vertical cavity Surface emitting Lasers written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
