Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.
Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.
Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.
Download or read book Carbons and Carbon supported Catalysts in Hydroprocessing written by Edward Furimsky and published by Royal Society of Chemistry. This book was released on 2008 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials have, in recent years, been attracting attention as potential supports in heterogeneous catalysis. In 2006, the number of articles dealing with various types of catalysts supported on carbon approached 1000, however only a fraction of those were devoted to hydroprocessing catalysts, despite the fact that interest in carbons as supports for hydroprocessing catalysts began more than two decades ago. This unique book is a comprehensive summary of recent research in the field and covers all areas of carbons and carbon materials. The potential application of carbon supports, partic.
Download or read book Heterogeneous Catalysts written by Wey Yang Teoh and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge of heterogeneous catalysts including new applications in energy and environmental fields This book focuses on emerging techniques in heterogeneous catalysis, from new methodology for catalysts design and synthesis, surface studies and operando spectroscopies, ab initio techniques, to critical catalytic systems as relevant to energy and the environment. It provides the vision of addressing the foreseeable knowledge gap unfilled by classical knowledge in the field. Heterogeneous Catalysts: Advanced Design, Characterization and Applications begins with an overview on the evolution in catalysts synthesis and introduces readers to facets engineering on catalysts; electrochemical synthesis of nanostructured catalytic thin films; and bandgap engineering of semiconductor photocatalysts. Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. It covers bridging pressure gap in surface catalytic studies; tomography in catalysts design; and resolving catalyst performance at nanoscale via fluorescence microscopy. Quantum approaches to predicting molecular reactions on catalytic surfaces follows that, along with chapters on Density Functional Theory in heterogeneous catalysis; first principles simulation of electrified interfaces in electrochemistry; and high-throughput computational design of novel catalytic materials. The book also discusses embracing the energy and environmental challenges of the 21st century through heterogeneous catalysis and much more. Presents recent developments in heterogeneous catalysis with emphasis on new fundamentals and emerging techniques Offers a comprehensive look at the important aspects of heterogeneous catalysis Provides an applications-oriented, bottoms-up approach to a high-interest subject that plays a vital role in industry and is widely applied in areas related to energy and environment Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry.
Download or read book Catalyst Immobilization written by Maurizio Benaglia and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource on techniques and applications for immobilizing catalysts Catalyst Immobilization: Methods and Applications covers catalyst immobilization topics including technologies, materials, characterization, chemical activity, and recyclability. The book also presents innovative applications for supported catalysts, such as flow chemistry and machine-assisted organic synthesis. Written by an international panel of expert contributors, this book outlines the general principles of catalyst immobilization and explores different types of supports employed in catalyst heterogenization. The book?s chapters examine the immobilization of chiral organocatalysts, reactions in flow reactors, 3D printed devices for catalytic systems, and more. Catalyst Immobilization offers a modern vision and a broad and critical view of this exciting field. This important book: -Offers a guide to supported and therefore recyclable catalysts, which is one of the most important tools for developing a highly sustainable chemistry -Presents various immobilization techniques and applications -Explores new trends, such as 3D printed devices for catalytic systems -Contains information from a leading international team of authors Written for catalytic chemists, organic chemists, process engineers, biochemists, surface chemists, materials scientists, analytical chemists, Catalyst Immobilization: Methods and Applications presents the latest developments and includes a review of the innovative trends such as flow chemistry, reactions in microreactors, and beyond.
Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
Download or read book Catalyst Immobilization written by Maurizio Benaglia and published by John Wiley & Sons. This book was released on 2019-12-02 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource on techniques and applications for immobilizing catalysts Catalyst Immobilization: Methods and Applications covers catalyst immobilization topics including technologies, materials, characterization, chemical activity, and recyclability. The book also presents innovative applications for supported catalysts, such as flow chemistry and machine-assisted organic synthesis. Written by an international panel of expert contributors, this book outlines the general principles of catalyst immobilization and explores different types of supports employed in catalyst heterogenization. The book?s chapters examine the immobilization of chiral organocatalysts, reactions in flow reactors, 3D printed devices for catalytic systems, and more. Catalyst Immobilization offers a modern vision and a broad and critical view of this exciting field. This important book: -Offers a guide to supported and therefore recyclable catalysts, which is one of the most important tools for developing a highly sustainable chemistry -Presents various immobilization techniques and applications -Explores new trends, such as 3D printed devices for catalytic systems -Contains information from a leading international team of authors Written for catalytic chemists, organic chemists, process engineers, biochemists, surface chemists, materials scientists, analytical chemists, Catalyst Immobilization: Methods and Applications presents the latest developments and includes a review of the innovative trends such as flow chemistry, reactions in microreactors, and beyond.
Download or read book Catalysis written by J.A. Moulijn and published by Elsevier. This book was released on 1993-09-09 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis is a multidisciplinary activity which is reflected in this book. The editors have chosen a novel combination of basic disciplines - homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis with metallic and non-metallic solids. The main theme of the book is the molecular approach to industrial catalysis.In the introductory section Chapter 1 presents a brief survey of the history of industrial heterogeneous and homogeneous catalysis. Subsequently, a selection of current industrial catalytic processes is described (Chapter 2). A broad spectrum of important catalytic applications is presented, including the basic chemistry, some engineering aspects, feedstock sources and product utilisation. In Chapter 3, kinetic principles are treated.The section on fundamental catalysis begins with a description of the bonding in complexes and to surfaces (Chapter 4). The elementary steps on complexes and surfaces are described. The chapter on heterogeneous catalysis (5) deals with the mechanistic aspects of three groups of important reactions: syn-gas conversion, hydrogenation, and oxidation. The main principles of metal and metal oxide catalysis are presented. Likewise, the chapter on homogeneous catalysis (6) concentrates on three reactions representing examples from three areas: carbonylation, polymerization, and asymmetric catalysis. Identification by in situ techniques has been included. Many constraints to the industrial use of a catalyst have a macroscopic origin. In applied catalysis it is shown how catalytic reaction engineering deals with such macroscopic considerations in heterogeneous as well as homogeneous catalysis (Chapter 7). The transport and kinetic phenomena in both model reactors and industrial reactors are outlined.The section on catalyst preparation (Chapters 8 and 9) is concerned with the preparation of catalyst supports, zeolites, and supported catalysts, with an emphasis on general principles and mechanistic aspects. For the supported catalysts the relation between the preparative method and the surface chemistry of the support is highlighted. The molecular approach is maintained throughout. The first chapter (10) in the section on catalyst characterization summarizes the most common spectroscopic techniques used for the characterisation of heterogeneous catalysts such as XPS, Auger, EXAFS, etc. Temperature programmed techniques, which have found widespread application in heterogeneous catalysis both in catalyst characterization and simulation of pretreatment procedures, are discussed in Chapter 11. A discussion of texture measurement, theory and application, concludes this section (12). The final chapter (13) gives an outline of current trends in catalysis. Two points of view are adopted: the first one focusses on developments in process engineering. Most often these have their origin in demands by society for better processes. The second point of view draws attention to the autonomous developments in catalysis, which is becoming one of the frontier sciences of physics and chemistry. In this book emphasis is on those reactions catalyzed by heterogeneous and homogeneous catalysts of industrial relevance. The integrative treatment of the subject matter involves many disciplines, consequently, the writing of the book has been a multi-author task. The editors have carefully planned and harmonized the contents of the chapters.
Download or read book Nanoparticles in Catalysis written by Karine Philippot and published by John Wiley & Sons. This book was released on 2021-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticles in Catalysis Discover an essential overview of recent advances and trends in nanoparticle catalysis Catalysis in the presence of metal nanoparticles is an important and rapidly developing research field at the frontier of homogeneous and heterogeneous catalysis. In Nanoparticles in Catalysis, accomplished chemists and authors Karine Philippot and Alain Roucoux deliver a comprehensive guide to the key aspects of nanoparticle catalysis, ranging from synthesis, activation methodology, characterization, and theoretical modeling, to application in important catalytic reactions, like hydrogen production and biomass conversion. The book offers readers a review of modern and efficient tools for the synthesis of nanoparticles in solution or onto supports. It emphasizes the application of metal nanoparticles in important catalytic reactions and includes chapters on activation methodology and supported nanoclusters. Written by an international team of leading voices in the field, Nanoparticles in Catalysis is an indispensable resource for researchers and professionals in academia and industry alike. Readers will also benefit from the inclusion of: A thorough introduction to New Trends in the Design of Metal Nanoparticles and Derived Nanomaterials for Catalysis An exploration of Dynamic Catalysis and the Interface Between Molecular and Heterogeneous Catalysts A practical discussion of Metal Nanoparticles in Water: A Relevant Toolbox for Green Catalysis Organometallic Metal Nanoparticles for Catalysis A concise treatment of the opportunities and challenges of CO2 Hydrogenation to Oxygenated Chemicals Over Supported Nanoparticle Catalysts Perfect for catalytic, organic, inorganic, and physical chemists, Nanoparticles in Catalysis will also earn a place in the libraries of chemists working with organometallics and materials scientists seeking a one-stop resource with expert knowledge on the synthesis and characterization of nanoparticle catalysis.
Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heterogeneous Catalytic Materials written by Guido Busca and published by Newnes. This book was released on 2014-05-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalytic Materials discusses experimental methods and the latest developments in three areas of research: heterogeneous catalysis; surface chemistry; and the chemistry of catalysts. Catalytic materials are those solids that allow the chemical reaction to occur efficiently and cost-effectively. This book provides you with all necessary information to synthesize, characterize, and relate the properties of a catalyst to its behavior, enabling you to select the appropriate catalyst for the process and reactor system. Oxides (used both as catalysts and as supports for catalysts), mixed and complex oxides and salts, halides, sulfides, carbides, and unsupported and supported metals are all considered. The book encompasses applications in industrial chemistry, refinery, petrochemistry, biomass conversion, energy production, and environmental protection technologies. - Provides a systematic and clear approach of the synthesis, solid state chemistry and surface chemistry of all solid state catalysts - Covers widely used instrumental techniques for catalyst characterization, such as x-ray photoelectron spectroscopy, scanning electron microscopy, and more - Includes characterization methods and lists all catalytic behavior of the solid state catalysts - Discusses new developments in nanocatalysts and their advantages over conventional catalysts
Download or read book Polymer Supported Organic Catalysts written by Narendra Chauhan and published by CRC Press. This book was released on 2024-07-26 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-supported organic catalysts are largely insoluble in most reaction solvents, which allows for easy recovery and recycling of the catalysts. They are generally stable, readily available, and environmental friendly, so they have attracted the interest of many synthetic chemists in the industrial and academic fields. In this book, different types of polymer-supported catalysts based on peptides, polystyrene, polyethers, poly(acrylic acid), poly(ethylene imine), poly(2-oxazoline), poly(isobutylene), poly(norbornene), etc., as well as metals are included with their synthetic organic synthesis applications. It is believed that this work will be of interest to organic chemists, material scientists, chemical engineers, polymer scientists and technologists.
Download or read book Synthesis Characterization and Evaluation of Silica and Polymer Supported Catalysts for the Production of Fine Chemicals written by Rebecca Anne Shiels and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis is an important field of study in chemical engineering and chemistry due to its application in a vast number of chemical transformations. Traditionally, catalysts have been developed as homogeneous molecular species or as heterogeneous insoluble materials. While homogeneous catalysts are typically very active and selective, they are difficult to recover. Conversely, heterogeneous catalysts are easy to recover and reuse, but they generally are less selective. To address these issues, the immobilization of homogeneous catalyst analogs onto solid supports has been a subject of research for the past few decades. Nonetheless, the effects of immobilization are still not completely predictable, and so continued effort is required to develop new immobilized catalysts as well as to develop a better understanding of how different parameters affect catalytic behavior. This dissertation presents the synthesis, characterization, and evaluation of new immobilized catalysts for different applications. First, a solid base catalyst supported on silica was developed and studied in the synthesis of cyclic carbonates from epoxides and carbon dioxide. Next, polymer and silica supported vanadium Schiff base catalysts were developed and evaluated for use in the oxidative kinetic resolution of alpha-hydroxy esters, an enantioselective reaction. Lastly, salen catalyst analogs with amine reactive functional groups were synthesized and characterized for grafting onto aminosilicas with different degrees of amine group isolation. The grafted catalysts were then tested to determine how catalyst spacing on the surface affects their behavior. Throughout the presentation of these results, comparisons are made amongst the new supported catalysts and relevant existing catalysts to discern general trends which could be applied to a wider range of immobilized catalysts. Finally, research opportunities for further improvements in these areas are suggested.
Download or read book Heterogeneous Catalysis in Sustainable Synthesis written by Bela Torok and published by Elsevier. This book was released on 2021-09-17 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalysis in Sustainable Synthesis is a practical guide to the use of solid catalysts in synthetic chemistry that focuses on environmentally benign applications. Collating essential information on solid catalysts into a single volume, it reveals how the efficient use of heterogeneous catalysts in synthetic chemistry can support sustainable applications. Beginning with a review of the fundamentals of heterogeneous catalytic synthesis, the book then explores the basic concepts of heterogeneous catalytic reactions from adsorption to catalyst poisons, the use of non-traditional activation methods, recommended solvents, the major types of both metal and non-metal solid catalysts, and applications of these catalysts in sustainable synthesis. Based on the extensive experience of its expert author, this book aims to encourage and support synthetic chemists in using solid catalysts in their own work, while also highlighting the important link between heterogeneous catalysis and sustainability to all those interested. - Combines foundational knowledge with a focus on practical applications - Organizes information by reaction type, allowing readers to easily find examples of how to carry out specific reaction types with solid catalysts - Highlights emerging areas such as nanoparticle catalysis and metal-organic framework (MOF) based catalysts
Download or read book Homogeneous Catalysis written by George William Parshall and published by John Wiley & Sons. This book was released on 1980 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains a balanced discussion of homogeneous catalytic reactions that are used in industry, featuring every documented example employed in a current commercial process, or that have a broad application in the organic synthesis laboratory. Incorporates synthesis with chiral catalysts in chapters on hydrogenation, CO chemistry and olefin oxidation. New additions include Tennessee Eastman's coal-based acetic anhydride plant and IFP's Dimersol process for dimerizing propylene as well as major changes in the areas on pharmaceuticals, flavors, fragrances, agricultural and electronic chemicals.
Download or read book Clean Synthesis Using Porous Inorganic Solid Catalysts and Supported Reagents written by James H. Clark and published by Royal Society of Chemistry. This book was released on 2000 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste minimisation has a number of aims which include enhancing the intrinsic selectivity of any given process, providing a means of recovering reagents in a form which allows easy regeneration and the replacement of stoichiometric processes with catalytic ones. Solids, as catalysts or as supports for other reagents, offer potential for benefit in all these areas. This monograph provides an overview of the properties of the more useful solid catalysts and supported reagents, and highlights their most valuable applications in the preparation of organic chemicals in liquid phase reactions. Clean Synthesis Using Porous Inorganic Solid Catalysts and Supported Reagents is concerned with the use of solid catalysts in the clean synthesis of organic chemicals. The emphasis is on chemical processes of importance to the manufacture/preparation of fine and speciality chemicals, chemical intermediates and pharmaceutical intermediates, especially where catalysis is not currently used or where current catalysts are homogeneous, leading to difficult separation procedures and unacceptable levels of waste. This book focuses on solid catalysts based on inorganic supports and covers the emerging area of chemically modified mesoporous solid catalysts.
