Download or read book Superplasticity written by K. A. Padmanabhan and published by Springer. This book was released on 2018-12-08 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.
Download or read book Superplasticity in Advanced Materials written by José María Cabrera Marrero and published by Materials Research Forum LLC. This book was released on 2023-09-01 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents practical and theoretical works on superplasticity in metals and ceramics, on deformation mechanisms, on processes to obtain large ultrafine-grained structures, on advanced characterization techniques, and on hot deformation of advanced materials. Key papers focus on (1) processing of metallic alloys for achieving exceptional superplastic properties, (2) high-pressure sliding (HPS) processes, (3) in-situ neutron and synchrotron methods, and (4) ultra-severe plastic deformation. Keywords: Superplasticity, Superfunctionality, High-pressure Sliding, High-pressure Torsion, Precise Forming, Numerical Simulation, Aeronautical Parts, Near-unconstrained Superplastic Parts, Low-temperature Superplasticity, Friction Stir Processing, Microstructure Evolution, Corrosion Properties, Duplex Stainless Steel, Grain Boundary Sliding, Laminated Materials, Asymmetric Hot Rolling, Uniaxial Hot Pressing, Diffusion Bonding.
Download or read book Superplasticity and Grain Boundaries in Ultrafine Grained Materials written by Alexander P. Zhilyaev and published by Academic Press. This book was released on 2020-11-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity and Grain Boundaries in Ultrafine-Grained Materials, Second Edition, provides cutting-edge modeling solutions surrounding the role of grain boundaries in processes such as grain boundary diffusion, relaxation and grain growth. In addition, the book's authors explore the formation and evolution of the microstructure, texture and ensembles of grain boundaries in materials produced by severe plastic deformation. This updated edition, written by leading experts in the field, has been revised to include new chapters on the basics of nanostructure processing, the influence of deformation mechanisms on grain refinement, processing techniques for ultrafine-grained and nanostructured materials, and much more. Provides practical applications and methods for the proper implementation of models, allowing for more effective complex metal forming processes Features new chapters on the microstructure, mechanical behavior and functional properties of HCP metals, processing ultrafine-grained and nanostructured materials, and more Covers experimental assessment and computational modeling techniques for adiabatic heating and saturation of grain refinement during SPD of metals and alloys
Download or read book Friction Stir Superplasticity for Unitized Structures written by Zongyi Ma and published by Butterworth-Heinemann. This book was released on 2014-05-27 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals and potential applications of ‘friction stir superplasticity for unitized structures’. Conventional superplastic forming of sheets is limited to the thickness of 3 mm because the fine grained starting material is produced by rolling. Friction stir superplasticity has grown rapidly in the last decade because of the effectiveness of microstructural refinement. The thickness of the material remains almost constant, and that allows for forming of thick sheets/plates, which was not possible before. The field has reached a point where designers have opportunities to expand the extent of unitized structures, which are structures in which the traditional primary part and any supporting structures are fabricated as a single unit. With advanced optimization and material considerations, this class of structures can be lighter weight and more efficient, making them less costly, as well as mechanically less complex, reducing areas of possible failure. Discusses how friction stir processing allows selective microstructural refinement without thickness change Demonstrates how higher thickness sheets and plates can be superplastically formed Examples are presented for aluminum, magnesium and titanium alloys Covers the production of low-cost unitized structures by selectively processing cast sheets/plates
Download or read book Superplasticity of Alloys Intermetallides and Ceramics written by Oscar A. Kaibyshev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity is shown to be a universal phenomenon in materials ranging from metals and intermetallics to ceramics. Superplastic deformation facilitates the production of materials with specifically chosen properties. This is illustrated using the examples of Mg-, Al-, and Ti-based commercial alloys, steels, and superalloys. Some of the strenghts of this book are: the broad range of materials studied, the reduction of scientific results to a form suitable for the practitioner, a profound physical analysis of the phenomenon, a new approach to superplastic treatment as a kind of strain-heat treatment, the presentation of new data on superplastic flow and on production techniques of micro- and submicrocrystalline structures.
Download or read book Towards Innovation in Superplasticity I written by T. Sakuma and published by Trans Tech Publications Ltd. This book was released on 1996-10-21 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the proceedings of the International Symposium towards Innovation in Superplasticity. The research project, "Innovation in Superplasticity", was chosen to be one of the priority scientific research efforts in 1996, of the Ministry of Education, Science and Culture, Japan.
Download or read book Superplasticity in Advanced Materials ICSAM 2015 written by Eiichi Sato and published by Trans Tech Publications Ltd. This book was released on 2016-01-08 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of Selected, Peer Reviewed Papers from the 12th International Conference on Superplasticity in Advanced Materials (ICSAM 2015), September 7-11, 2015, Tokyo, Japan. The 99 papers are grouped as follows: Chapter 1: Keynote Lecture Chapter 2: Mechanism of Superplasticity Chapter 3: Superplastic Materials Chapter 4: Microstructure Refinement Chapter 5: Industrial Application
Download or read book Superplasticity written by K Anantha Padmanabhan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book in a new series - "Materials Research and Engineering" - devoted to the science and technology of materials. "Materials Research and Engineering" evolves from a previous series on "Reine und Allgemeine Metallkunde", which was edited by Werner KBster until his eightieth birthday in 1976. Although the present series is an outgrowth of the earlier one, it should not and cannot be regarded as a continuation. There had to be a shift of scope - and a change in presenta tion as well. Metallurgy is no longer an isolated art and science. Rather, it is linked by its scientific basis and technological implications to non-metallic and composite materials, as well as to processes for production, refining, shaping, surface treatment, and application. Thus, the new series, "Materials Research and Engineering", will present up-to-date information on scientific and technological pro gress, as well as on issues of general relevance within the engineering field and industrial society. Following the general position analysis of materials in the present world as given in volume 1, now volume 2 focuses on a special topic: It provides a thorough treatment of theoretical, experimental, and applied aspects of superplasticity.
Download or read book Superplastic Flow written by K.A. Padmanabhan and published by Springer Science & Business Media. This book was released on 2001-02-26 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book aims at the following: - To outline briefly the techniques of mechanics of solids, particularly as it applies to strain rate sensitive materials, - to assess the present level of investigations on the mechanical behaviour of superplastics, - to formulate the main issues and challenges in mechanics of superplasticity, - to analyse the mathematical models/constitutive equations for superplastic flow from the viewpoint of mechanics, - to review the models of superplastic metal working processes, - to indicate with examples possible new results that can be obtained using the methods of mechanics of solids. It is intended for a variety of readers who may be interested in the phenomenon of superplasticity for different reasons: materials scientists and physicists working in educational institutions and R&D units, those who wish to work on the applications of superplasticity, engineers in industry, students at senior undergraduate and postgraduate levels and those who wish to understand the phenomenology and mechanics of superplasticity without involvement in actual research. A reader who has exposure to standard differential and integral calculus and elementary tensor calculus at a level taught to senior undergraduate students at a technical university should have no difficulty in following the treatments. The analytical procedures are explained in an Appendix with simple examples.
Download or read book Superplastic Forming Diffusion Bonding Technology of Titanium Alloys written by Zhiqiang Li and published by Springer Nature. This book was released on 2023-10-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive illustration to the superplastic forming/diffusion bonding (SPF/DB) technology developed over decades of research on titanium alloys, process modeling, and its application. SPF/DB technology plays key roles in building aviation components with complicated structures, with highly beneficial effects when well designed. With the ever-increasing demand on components with multiple layers, there is an urgent need for an updated assessment of traditional and modern SPF/DB processing methods. Success critically depends on making the most practical and effective choice of SPF/DB method for a given application. The book introduces titanium and titanium alloys, SPF/DB processing and its modeling, and applications for building typical single or multiple layer(s) structures. Particular attention is paid to illustrating the microstructure evolution during SPF/DB processes. The information for making technical decisions about optimal choice of measurement and evaluation methods is also given in the book. Each chapter follows a focused and pragmatic format. Fully illustrated throughout, the book presents the state of the art in SPF/DB technology in a manner that makes it useful for engineers to improve the established forming processes and quality of components. This book is an essential reading material for industrial practitioners, academic researchers and postgraduates.
Download or read book Superplastic Forming of Advanced Metallic Materials written by G Giuliano and published by Elsevier. This book was released on 2011-06-27 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra fine-grained metals can show exceptional ductility, known as superplasticity, during sheet forming. The higher ductility of superplastic metals makes it possible to form large and complex components in a single operation without joints or rivets. The result is less waste, lower weight and manufacturing costs, high precision and lack of residual stress associated with welding which makes components ideal for aerospace, automotive and other applications. Superplastic forming of advanced metallic materials summarises key recent research on this important process. Part one reviews types of superplastic metals, standards for superplastic forming, processes and equipment. Part two discusses ways of modelling superplastic forming processes whilst the final part of the book considers applications, including superplastic forming of titanium, aluminium and magnesium alloys. With its distinguished editor and international team of contributors, Superplastic forming of advanced metallic materials is a valuable reference for metallurgists and engineers in such sectors as aerospace and automotive engineering. Note: The Publishers wish to point out an error in the authorship of Chapter 3 which was originally listed as: G. Bernhart, Clément Ader Institute, France. The correct authorship is: G Bernhart, P. Lours, T. Cutard, V. Velay, Ecole des Mines Albi, France and F. Nazaret, Aurock, France. The Publishers apologise to the authors for this error. Reviews types of superplastic metals and standards for superplastic forming Discusses the modelling of superplastic forming, including mathematical and finite element modelling Examines various applications, including superplastic forming of titanium, aluminiun and magnesium alloys
Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in the field of superplasticity, the ability of certain materials to undergo very large tensile strains. This phenomenon has increasing commercial applications, but also presents a fascinating scientific challenge in attempts to understand the physical mechanisms that underpin it. The authors emphasize the materials aspects of superplasticity. Beginning with a brief history of the phenomenon, they describe the two major types of superplasticity-- fine-structure and internal-stress superplasticity-- and discuss their operative mechanisms. They also present microstructural factors controlling the ductility and fracture in superplastic materials. Observations of superplasticity in metals (including aluminum, magnesium, iron, titanium and nickel), ceramics (including monoliths and composites), intermetallics (including iron, nickel, and titanium base), and laminates are thoroughly described. This is a valuable text for graduate students and researchers in materials science and engineering.
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-03-27 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes covers all aspects of the physical metallurgy, analytical techniques, and processing of aluminium, including hardening, annealing, aging, property prediction, corrosion, residual stress and distortion, welding, casting, forging, molten metal processing, machining, rolling, and extrusion. It also features an extensive, chapter-length consideration of quenching.
Download or read book Superplasticity of Alloys Intermetallides and Ceramics written by Oscar A. Kaibyshev and published by Springer. This book was released on 2011-12-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity is shown to be a universal phenomenon in materials ranging from metals and intermetallics to ceramics. Superplastic deformation facilitates the production of materials with specifically chosen properties. This is illustrated using the examples of Mg-, Al-, and Ti-based commercial alloys, steels, and superalloys. Some of the strenghts of this book are: the broad range of materials studied, the reduction of scientific results to a form suitable for the practitioner, a profound physical analysis of the phenomenon, a new approach to superplastic treatment as a kind of strain-heat treatment, the presentation of new data on superplastic flow and on production techniques of micro- and submicrocrystalline structures.
Download or read book Severe Plastic Deformation written by Burhanettin Altan and published by Nova Publishers. This book was released on 2006 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been already well established that the nanostructured materials (materials with a grain size of 100mm or less) is the future materials. Nanostructured materials possess properties superior to those of conventional, coarse grained materials. Hence designing potentially cost efficient and environmentally friendly products with better performance is a possibility. Among others, nanostructured materials exhibit increased strength, hardness and ductility and provide an opportunity for superplastic forming. When all the procedures in use for the production of nanostructured materials are examined, only severe plastic deformation (SPD) processes exhibit a potential for producing relatively large samples suitable for industrial applications. In this monograph, the state-of-the-art on severe plastic deformation methods is presented in one volume. The monograph is organised into eight chapters, each of which contains papers on different aspect of severe plastic deformation methods prepared by the experts in this field. The topics covered in the monograph are structure formation, phase transformation, superplasticity, mechanical properties of nanostructured materials, electronic and magnetic properties of nanostructured materials, deformation analysis, novel SPD methods, commercialisation of ECAE method.
Download or read book Advanced Light Alloys and Composites written by R. Ciach and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert exposition of the structural and mechanical properties of light alloys and composites, bridging the gap between scientists and industrial engineers in its consideration of advanced light materials, their structure, properties, technology and application. Includes basic problems of alloy constitution and phase transformations. The aluminium alloys are the main topic of the book, consideration being given to their properties, casting technology, thermomechanical treatment and structure. Attention is also given to the magnesium alloys, particularly those having rare earth metal constituents. Both commercial titanium alloys and intermetallic compounds are discussed, as are metallic composites. The latest engineering techniques are discussed in both theoretical and practical terms.
Download or read book Superplasticity written by Oskar Akramovich Kaĭbyshev and published by . This book was released on 2005 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The remarkable technology of superplastic forming was developed and perfected in the former Soviet Union. This volume, written by two Russian scientists at the Institute for Metals Superplasticity Problems in Ufa, Bashkortostan, Russia (of which Kaibyshev was the former director), presents a detailed and up-to-date treatment of the technology, with particular attention to the production of ultrafine grain materials, their use in superplastic shaping and forming, practical aspects of the process, and new developments in submicrocrystalline and nanocrystalline materials production. The comprehensive bibliography of the largely Russian literature will be a valuable resource for the serious scientist. Specialists in machine building and metallurgy, as well as graduate students and researchers will be the book's audience. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).
