Download or read book Acute Exposure Guideline Levels for Selected Airborne Chemicals written by National Research Council and published by National Academies Press. This book was released on 2010-03-18 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the eighth volume in the series Acute Exposure Guideline Levels for Selected Airborne Chemicals, and reviews AEGLs for acrolein, carbon monoxide, 1,2-dichloroethene, ethylenimine, fluorine, hydrazine, peracetic acid, propylenimine, and sulfur dioxide for scientific accuracy, completeness, and consistency with the NRC guideline reports.
Download or read book Health Effects of Ambient Air Pollution written by Jane Q. Koenig and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health Effects of Ambient Air Pollution provides the reader with an overview of the health effects of air pollution in human subjects. The majority of the book is devoted to the discussion of the health effects of common widespread air pollutants regulated by the U.S. Environmental Protection Agency through national ambient air quality standards. The book reviews the sources and fate of common air pollutants in ambient air and researches the adverse effects of these outdoor and indoor air pollutants in `in vivo' cell systems, animals, and humans. Research for the book was conducted in controlled laboratory studies and epidemiologic studies. Special emphasis throughout Health Effects of Ambient Air Pollution is placed on the effects of air pollution in subjects with asthma.
Download or read book Sulphur Sulphur Dioxide and Sulphuric Acid written by U. H. F. Sander and published by Wiley-VCH. This book was released on 1984 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Sulphonation Techniques written by Navin G. Ashar and published by Springer. This book was released on 2015-10-10 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete, in-depth analysis for on the impact of liquid sulfur dioxide and liquid sulfur trioxide to carry out complex and difficult sulfonations, as well as manufacture of sulfuric acid with a CAPEX requirement of less than half, an area requirement less than one-third, and no emission of sulfur dioxide. The processes described in this volume represents an innovative approach relevant to the current manufacturing processes of sulfuric acid, sulfamic acid, para toluene sulfonic acid and other sulfonated product.
Download or read book Air Quality Guidelines written by World Health Organization and published by World Health Organization. This book was released on 2006 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents revised guideline values for the four most common air pollutants - particulate matter, ozone, nitrogen dioxide and sulfur dioxide - based on a recent review of the accumulated scientific evidence. The rationale for selection of each guideline value is supported by a synthesis of information emerging from research on the health effects of each pollutant. As a result, these guidelines now also apply globally. They can be read in conjunction with Air quality guidelines for Europe, 2nd edition, which is still the authority on guideline values for all other air pollutants. As well as revised guideline values, this book makes a brief yet comprehensive review of the issues affecting the application of the guidelines in risk assessment and policy development. Further, it summarizes information on: . pollution sources and levels in various parts of the world, . population exposure and characteristics affecting sensitivity to pollution, . methods for quantifying the health burden of air pollution, and . the use of guidelines in developing air quality standards and other policy tools. Finally, the special case of indoor air pollution is explored. Prepared by a large team of renowned international experts who considered conditions in various parts of the globe, these guidelines are applicable throughout the world. They provide reliable guidance for policy-makers everywhere when considering the various options for air quality management.
Download or read book Meta Analysis with R written by Guido Schwarzer and published by Springer. This book was released on 2015-10-08 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to performing meta-analysis using the statistical software R. It is intended for quantitative researchers and students in the medical and social sciences who wish to learn how to perform meta-analysis with R. As such, the book introduces the key concepts and models used in meta-analysis. It also includes chapters on the following advanced topics: publication bias and small study effects; missing data; multivariate meta-analysis, network meta-analysis; and meta-analysis of diagnostic studies.
Download or read book WHO global air quality guidelines written by Weltgesundheitsorganisation and published by World Health Organization. This book was released on 2021-09-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of these updated global guidelines is to offer health-based air quality guideline levels, expressed as long-term or short-term concentrations for six key air pollutants: PM2.5, PM10, ozone, nitrogen dioxide, sulfur dioxide and carbon monoxide. In addition, the guidelines provide interim targets to guide reduction efforts of these pollutants, as well as good practice statements for the management of certain types of PM (i.e., black carbon/elemental carbon, ultrafine particles, particles originating from sand and duststorms). These guidelines are not legally binding standards; however, they provide WHO Member States with an evidence-informed tool, which they can use to inform legislation and policy. Ultimately, the goal of these guidelines is to help reduce levels of air pollutants in order to decrease the enormous health burden resulting from the exposure to air pollution worldwide.
Download or read book Sulfur Dioxide Insertion Reactions for Organic Synthesis written by Danqing Zheng and published by . This book was released on 2017 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Toxicological Profile for Sulfur Dioxide written by and published by . This book was released on 1997 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Measuring and Monitoring Atmospheric Sulfur Dioxide written by Seymour Hochheiser and published by . This book was released on 1964 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improving Crop Resistance to Abiotic Stress written by Narendra Tuteja and published by Wiley-Blackwell. This book was released on 2012-03-30 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abiotic stress, such as high salinity and drought is the most common challenge for sustainable food production in large parts of the world, in particular in emerging countries. The ongoing and expected global climate change will further increase these challenges in many areas, making improved stress resistance of crops a key topic for the 21st Century. Proteomics, genomics and metabolomics are methods allowing for the rapid and complete analysis of the complete physiology of crop plants. This knowledge in turn, is the prerequisite for improvements of crop resistance against abiotic stress through genetic engineering or traditional breeding methods. Improving Crop Resistance to Abiotic Stress is a double-volume, up-to-date overview of current progress in improving crop quality and quantity using modern methods such as proteomics, genomics and metabolomics. With this particular emphasis on genetic engineering, this text focuses on crop improvement under adverse conditions, paying special attention to such staple crops as rice, maize, and pulses. It includes an excellent mix of specific examples, such as the creation of nutritionally-fortified rice and a discussion of the political and economic implications of genetically engineered food. The result is a must-have hands-on guide, ideally suited for Agricultural Scientists, Students of Agriculture, Plant Physiologists, Plant Breeders, Botanists and Biotechnologists. Sections include: PART I Climate Change and Abiotic Stress Factors PART II Methods to Improve Crop Productivity PART III Species-Specific Case Studies: Graminoids, Leguminosae, Rosaceae
Download or read book Occupational Neurology written by and published by Elsevier. This book was released on 2015-11-09 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational Neurology a volume in the Handbook of Clinical Neurology Series, provides a comprehensive overview of the science, clinical diagnosis, and treatment for neurotoxin related neurological and psychiatric disorders. This timely collection provides not only a complete scientific reference on the chemical origin of this class of neurological and psychiatric disorders, but also a practical guide to diagnosis and treatment challenges and best practices. Handbook of Clinical Neurology Series The first volume of the Handbook of Clinical Neurology under the editorship of George Bruyn and Pierre Vinken was published in 1968. In 1982, the series was brought to an interim conclusion with the publication of the cumulative index volume (Volume 44). By that stage, the Handbook had come to represent one of the largest scientific works ever published. It enjoys a high reputation in specialist media circles throughout the world. After the series was concluded in 1982, it was realized that an update of the material was imperative. Accordingly, a revised series was planned and published over the following years, concluding with the publication of another cumulative index to both series (Volume 76-78) in 2002. Since then, George Bruyn has passed away and Pierre Vinken has retired, but the need for a further new series, incorporating advances in the field, again become necessary. Professors Michael J. Aminoff, François Boller and Dick F. Swaab have with enthusiasm taken on the responsibility of supervising the preparation of a third series, the first volumes of which were published in 2003. Now, more than 130 volumes after the first published, the Handbook of Clinical Neurology series continues to have an unparalleled reputation for providing the latest foundational research, diagnosis, and treatment protocols essential for both basic neuroscience research and clinical neurology. - Provides comprehensive coverage of neurotoxins, especially in the workplace - Details the latest science as the foundation for neurotoxicity diagnosis and treatment - Presents coverage of the diagnosis and treatment essential for clinical neurologists and occupational medicine specialists
Download or read book Atomic and Molecular Photoabsorption written by Joseph Berkowitz and published by Academic Press. This book was released on 2015-03-27 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic and Molecular Photoabsorption: Partial Cross Sections is a companion work to Joseph Berkowitz's earlier work, Atomic and Molecular Photoabsorption: Absolute Total Cross Sections, published with Academic Press in 2002. In this work Joseph Berkowitz selected the "best" absolute partial cross sections for the same species as included in the companion work. A contrast, however, is that photoabsorption measurements, being of order I/Io, do not require the most intense light sources, whereas acquiring data on the products of light interactions with gaseous matter (ions, electrons, various coincidence measurements) has benefited significantly with the arrival of second- and third-generation synchrotrons. The newer devices have also extended the energy range of the light sources to include the K-shells of the species discussed here. The newer light sources encouraged experimentalists to develop improved instrumentation. Thus, the determination of partial cross sections continues to be an active field, with more recent results in some cases superseding earlier ones. Where the accuracy of the absolute partial cross sections is deemed sufficient (less than five percent), numerical tables are included in this new work. In other cases, the available data are presented graphically. - Includes data on atoms, diatomic molecules, triatomic molecules, and polyatomic molecules - Written by world-leading pioneer in the field of photoionization mass spectrometry - Very clear presentation of the useful, quantitative information in both tables and graphs
Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.
Download or read book Clean Coal Engineering Technology written by Bruce G. Miller and published by Elsevier. This book was released on 2010-11-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. - Clean Liquids and Gaseous Fuels from Coal for Electric Power - Integrated Gasification Combined Cycle (IGCC) systems - Pulverized-Coal Power Plants - Advanced Coal-Based Power Plants - Fluidized-Bed Combustion Technology - CO2 capture and sequestration
Download or read book WHO Guidelines for Indoor Air Quality written by and published by World Health Organization. This book was released on 2010 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents WHO guidelines for the protection of public health from risks due to a number of chemicals commonly present in indoor air. The substances considered in this review, i.e. benzene, carbon monoxide, formaldehyde, naphthalene, nitrogen dioxide, polycyclic aromatic hydrocarbons (especially benzo[a]pyrene), radon, trichloroethylene and tetrachloroethylene, have indoor sources, are known in respect of their hazardousness to health and are often found indoors in concentrations of health concern. The guidelines are targeted at public health professionals involved in preventing health risks of environmental exposures, as well as specialists and authorities involved in the design and use of buildings, indoor materials and products. They provide a scientific basis for legally enforceable standards.
