Download or read book Subsurface Upgrading of Heavy Crude Oils and Bitumen written by Cesar Ovalles and published by CRC Press. This book was released on 2019-07-24 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy crude oils and bitumen represent more than 50% of all hydrocarbons available on the planet. These feedstocks have a low amount of distillable material and high level of contaminants that make their production, transportation, and refining difficult and costly by conventional technologies. Subsurface Upgrading of Heavy Crude Oils and Bitumen is of interest to the petroleum industry mainly because of the advantages compared to aboveground counterparts. The author presents an in-depth account and a critical review of the progress of industry and academia in underground or In-Situ upgrading of heavy, extra-heavy oils and bitumen, as reported in the patent and open literature. This work is aimed to be a standalone monograph, so three chapters are dedicated to the composition of petroleum and fundamentals of crude oil production and refining. Key Features: Offers a multidisciplinary scope that will appeal to chemists, geologists, biologists, chemical engineers, and petroleum engineers Presents the advantages and disadvantages of the technologies considered Discusses economic and environmental considerations for all the routes evaluated and offers perspectives from experts in the field working with highlighted technologies
Download or read book Subsurface Upgrading of Heavy Crude Oils and Bitumen written by Cesar Ovalles and published by CRC Press. This book was released on 2019-07-24 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy crude oils and bitumen represent more than 50% of all hydrocarbons available on the planet. These feedstocks have a low amount of distillable material and high level of contaminants that make their production, transportation, and refining difficult and costly by conventional technologies. Subsurface Upgrading of Heavy Crude Oils and Bitumen is of interest to the petroleum industry mainly because of the advantages compared to aboveground counterparts. The author presents an in-depth account and a critical review of the progress of industry and academia in underground or In-Situ upgrading of heavy, extra-heavy oils and bitumen, as reported in the patent and open literature. This work is aimed to be a standalone monograph, so three chapters are dedicated to the composition of petroleum and fundamentals of crude oil production and refining. Key Features: Offers a multidisciplinary scope that will appeal to chemists, geologists, biologists, chemical engineers, and petroleum engineers Presents the advantages and disadvantages of the technologies considered Discusses economic and environmental considerations for all the routes evaluated and offers perspectives from experts in the field working with highlighted technologies
Download or read book Heavy and Extra heavy Oil Upgrading Technologies written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2013-04-12 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional reservoirs of oil and gas represent a huge additional global source of fossil fuels. However, there is much still to be done to improve techniques for their processing to make recovery and refining of these particular energy sources more cost-effective. Brief but readable, Heavy and Extra-heavy Oil Upgrading Technologies provide readers with a strategy for future production (the up-stream) and upgrading (the down-stream). The book provides the reader with an understandable overview of the chemistry and engineering behind the latest developments and technologies in the industry as well as the various environmental regulations.Clear and rigorous, Heavy and Extra-heavy Oil Upgrading Technologies will prove tool for those scientists and engineers already engaged in fossil fuel science and technology as well as scientists, non-scientists, engineers, and non-engineers who wish to gain a general overview or update of the science and technology of unconventional fossil fuels in general and upgrading technologies in particular. The use of microorganisms and a number of physical methods, such as ultrasound, median microwave, cold plasma, electrokinetic and monocrystalline intermetallics, etc., will be discussed for the first time. - Overview of the chemistry, engineering, and technology of oil sands - Microorganisms and a number of physical methods such as ultrasound, median microwave, cold plasma, electrokinetic and monocrystalline intermetallics - Evolving and new environmental regulations regarding oil sands production processes
Download or read book Upgrading Oilsands Bitumen and Heavy Oil written by Murray R. Gray and published by University of Alberta. This book was released on 2015-04-17 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The emphasis throughout is to link the fundamentals of the molecules through to the economic drivers for the industry, because this combination determines the technology used for processing."-From the Introduction The high demand for quality petroleum products necessitates ongoing innovation in the science and engineering underlying oilsands extraction and upgrading. Beginning with a thorough grounding in the composition, fluid properties, reaction behaviour, and economics of bitumen and heavy oil, Murray Gray then delves into current processing technologies, particularly those used at full commercial scale. The tables of data on composition, yield, and behaviour of oilsands bitumen and heavy oil fractions are extensive. Though the focus is on bitumen from Alberta's oilsands-the largest resource in the world-the science applies to upgrading of heavy oil and petroleum residue feeds worldwide. Upgrading Oilsands Bitumen and Heavy Oil lays out the current best practice for engineers and scientists in the oilsands and refining industries, government personnel, academics, and students.
Download or read book Heavy Oil Recovery and Upgrading written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2019-03-15 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy Oil Recovery and Upgrading covers properties, factors, methods and all current and upcoming processes, giving engineers, new and experienced, the full spectrum of recovery choices, including SAGD, horizontal well technology, and hybrid approaches. Moving on to the upgrading and refining of the product, the book also includes information on in situ upgrading, refining options, and hydrogen production. Rounding out with environmental effects, management methods on refinery waste, and the possible future configurations within the refinery, this book provides engineers with a single source to make decisions and manage the full range of challenges. Presents the properties, mechanisms, screening criteria and field applications for heavy oil enhanced recovery projects Includes current upgrading options and future methods for refining heavy oil development Fills in the gaps between literature and practical application for everyday industry reference
Download or read book 4th Upgrading and Refining of Heavy Oil Bitumen and Synthetic Crude Oil Conference written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Oil Shale Natural Bitumen Heavy Oil and Peat Volume II written by Gao Jinsheng and published by EOLSS Publications. This book was released on 2009-04-29 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal, Oil Shale, Natural Bitumen, Heavy Oil and Peat is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Coal, Oil Shale, Natural Bitumen, Heavy Oil and Peat with contributions from distinguished experts in the field discusses matters of great relevance to our world such as: Coal, Oil Shale, Natural Bitumen, Heavy Oil and Peat; Coal Geology and Geochemistry; Coal Technology; Oil Shale; Natural Bitumen (Tar Sands) and Heavy Oil; Peat and Peatland. These two volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Sustainable In Situ Heavy Oil and Bitumen Recovery written by Mohammadali Ahmadi and published by Elsevier. This book was released on 2023-03-24 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable In-Situ Heavy Oil and Bitumen Recovery: Techniques, Case Studies, and Environmental Considerations delivers a critical reference for today's energy engineers who want to gain an accurate understanding of anticipated GHG emissions in heavy oil recovery. Structured to break down every method with introductions, case studies, technical limitations and summaries, this reference gives engineers a look at the latest hybrid approaches needed to tackle heavy oil recoveries while calculating carbon footprints. Starting from basic definitions and rounding out with future challenges, this book will help energy engineers collectively evolve heavy oil recovery with sustainability applications in mind. - Explains environmental footprint considerations within each recovery method - Includes the latest hybrid methods such as Hybrid of Air-CO2N2 and Cyclic Steam Stimulation (CSS) - Bridges practical knowledge through case studies, summaries and remaining technical challenges
Download or read book Upgrading Petroleum Residues and Heavy Oils written by R. Murray Gray and published by CRC Press. This book was released on 1994-04-19 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This useful reference offers in-depth coverage of current techniques for converting heavy oils and residues into more valuable distillates.Examines the chemistry of heavy hydrocarbon feeds and their properties important to engineering design, including phase behavior, reaction kinetics, and thermodynamic and transport characteristics!"
Download or read book Sovent Based Enhanced Oil Recovery for In Situ Upgrading of Heavy Oil Sands written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: With the depletion of conventional crude oil reserves in the world, heavy oil and bitumen resources have great potential to meet the future demand for petroleum products. However, oil recovery from heavy oil and bitumen reservoirs is much more difficult than that from conventional oil reservoirs. This is mainly because heavy oil or bitumen is partially or completely immobile under reservoir conditions due to its extremely high viscosity, which creates special production challenges. In order to overcome these challenges significant efforts were devoted by Applied Research Center (ARC) at Florida International University and The Center for Energy Economics (CEE) at the University of Texas. A simplified model was developed to assess the density of the upgraded crude depending on the ratio of solvent mass to crude oil mass, temperature, pressure and the properties of the crude oil. The simplified model incorporated the interaction dynamics into a homogeneous, porous heavy oil reservoir to simulate the dispersion and concentration of injected CO2. The model also incorporated the characteristic of a highly varying CO2 density near the critical point. Since the major challenge in heavy oil recovery is its high viscosity, most researchers have focused their investigations on this parameter in the laboratory as well as in the field resulting in disparaging results. This was attributed to oil being a complex poly-disperse blend of light and heavy paraffins, aromatics, resins and asphaltenes, which have diverse behaviors at reservoir temperature and pressures. The situation is exacerbated by a dearth of experimental data on gas diffusion coefficients in heavy oils due to the tedious nature of diffusivity measurements. Ultimately, the viscosity and thus oil recovery is regulated by pressure and its effect on the diffusion coefficient and oil swelling factors. The generation of a new phase within the crude and the differences in mobility between the new crude matrix and the precipitate readily enables removal of asphaltenes. Thus, an upgraded crude low in heavy metal, sulfur and nitrogen is more conducive for further purification.
Download or read book Thermal Recovery of Oil and Bitumen written by Roger M. Butler and published by Englewood Cliffs, N.J. : Prentice Hall. This book was released on 1991 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the recovery of heavy oils and bitumen by in situ thermal methods and discusses the technical factors and problems involved. The book summarizes, in a quantitative manner, techniques used in current petroleum industry practice.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Enhanced Recovery Methods for Heavy Oil and Tar Sands written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2016-02-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Enhanced Recovery Methods for Heavy Oil and Tar Sands, Second Edition, explores the importance of enhanced oil recovery (EOR) and how it has grown in recent years thanks to the increased need to locate unconventional resources such as heavy oil and shale. Unfortunately, petroleum engineers and managers aren't always well-versed in the enhancement methods that are available when needed or the most economically viable solution to maximize their reservoir's productivity. This revised new edition presents all the current methods of recovery available, including the pros and cons of each. Expanded and updated as a great preliminary text for the newcomer to the industry or subject matter, this must-have EOR guide teaches all the basics needed, including all thermal and non-thermal methods, along with discussions of viscosity, sampling, and the technologies surrounding offshore applications. - Enables users to quickly learn how to choose the most efficient recovery method for their reservoir while evaluating economic conditions - Presents the differences between each method of recovery with newly added real-world case studies from around the world - Helps readers stay competitive with the growing need of extracting unconventional resources with new content on how these complex reservoirs interact with injected reservoir fluids
Download or read book Heavy Oil Recovery and Upgrading written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2019-02-28 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy Oil Recovery and Upgrading covers properties, factors, methods and all current and upcoming processes, giving engineers, new and experienced, the full spectrum of recovery choices, including SAGD, horizontal well technology, and hybrid approaches. Moving on to the upgrading and refining of the product, the book also includes information on in situ upgrading, refining options, and hydrogen production. Rounding out with environmental effects, management methods on refinery waste, and the possible future configurations within the refinery, this book provides engineers with a single source to make decisions and manage the full range of challenges. - Presents the properties, mechanisms, screening criteria and field applications for heavy oil enhanced recovery projects - Includes current upgrading options and future methods for refining heavy oil development - Fills in the gaps between literature and practical application for everyday industry reference
Download or read book Enhanced Recovery Methods for Heavy Oil and Tar Sands written by James G. Speight and published by Elsevier. This book was released on 2013-11-25 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent oil price fluctuations continue to stress the need for more efficient recovery of heavy oil and tar sand bitumen resources. With conventional production steadily declining, advances in enhanced recovery will be required so that oil production can be extended and reservoirs last longer. A practical guide on heavy-oil related recovery methods is essential for all involved in heavy oil production. To feed this demand, James Speight, a well-respected scientist and author, provides a must-read for all scientists, engineers and technologists that are involved in production enhancement. In Enhanced Recovery Methods for Heavy Oil and Tar Sands, Speight provides the current methods of recovery for heavy oil and tar sand bitumen technology, broken down by thermal and non-thermal methods. An engineer, graduate student or professional working with heavy oil, upcoming and current, will greatly benefit from this much-needed text.
Download or read book Spills of Diluted Bitumen from Pipelines written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-03-22 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diluted bitumen has been transported by pipeline in the United States for more than 40 years, with the amount increasing recently as a result of improved extraction technologies and resulting increases in production and exportation of Canadian diluted bitumen. The increased importation of Canadian diluted bitumen to the United States has strained the existing pipeline capacity and contributed to the expansion of pipeline mileage over the past 5 years. Although rising North American crude oil production has resulted in greater transport of crude oil by rail or tanker, oil pipelines continue to deliver the vast majority of crude oil supplies to U.S. refineries. Spills of Diluted Bitumen from Pipelines examines the current state of knowledge and identifies the relevant properties and characteristics of the transport, fate, and effects of diluted bitumen and commonly transported crude oils when spilled in the environment. This report assesses whether the differences between properties of diluted bitumen and those of other commonly transported crude oils warrant modifications to the regulations governing spill response plans and cleanup. Given the nature of pipeline operations, response planning, and the oil industry, the recommendations outlined in this study are broadly applicable to other modes of transportation as well.
Download or read book Heavy oil and Oil sand Petroleum Systems in Alberta and Beyond written by Frances J. Hein and published by AAPG. This book was released on 2013-04-20 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardcover plus CD
