Download or read book Subsonic versus Supersonic Business Jets Full Concept Comparison considering Technical Environmental and Economic Aspects written by Michael Hans-Reichel and published by diplom.de. This book was released on 2012-01-19 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Introduction: On the 26th of August 2010 the new ultra-large-cabin ultra-long-range Gulfstream G650 business jet reached Mach 0.995 during its flight test campaign (1). This is almost the speed of sound (Mach 1) and inspires one to say, why not fly faster than the speed of sound! Reduce travelling time in the commercial business aviation segment. This is, however not a completely new vision. Many companies and research facilities have already spent a lot of time and investment in studies to investigate the feasibility of supersonic flight. Entry Into Service (EIS) for the new Gulfstream G650 is scheduled for 2012. In the following the main performance parameter of the G650 aircraft will be summarised. The parameters range, cruise speed, MTOW, etc. have been selected and serve as a basis to allow an appropriate comparison between the G650 as the latest high end Subsonic Business Jet and potential in future Supersonic Business Jets (SSBJ) within this subject Master Thesis. With the impressive maximum range of nearly 13,000 km the G650 can connect Dubai with New York or London with Buenos Aires within almost 14 hours. Maximum Range @ Normal Cruise Speed: 7,000 nm/12,964 km. Normal Cruise Speed Mach: 0.85/904 km/h. Mmo (Maximum Operating Mach Number): Mach 0.925. Maximum Cruise Altitude: 51,000 ft/15,545 m. Maximum Takeoff Weight (MTOW): 99,600 lb/45,178 kg. Maximum Fuel Weight: 44,200 lb/20,049 kg. Passengers: 11 18. Price: appr. 60-70 million USD. Gulfstream business rival Bombardier Aerospace also announced in October 2010 two new high end models, the Global 7000 and 8000 with a maximum range of 7,300 nm (13,520 km) and 7,900 nm (14,631 km) at cruise speed Mach 0.85. Entry Into Service is scheduled for 2016 (Global 7000) and 2017 (Global 8000). A comprehensive overview of business jets in service and in development is given in attachment 13.1. A Supersonic Business Jet flying at Mach 2 cruise speed could virtually halve the travelling time, which would enormously enhance the mobility and flexibility. In order to achieve this ambition a paradigm shift is required. New technologies must be established, the impact on the environment must be understood and minimised, existing regulations must be changed to permit overland flight restrictions and the product still needs to be economically viable. All of the above aspects must be considered and will be subject for discussion within this Master Thesis (See also figure [...]
Download or read book Subsonic Versus Supersonic Business Jets written by and published by . This book was released on 2011 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Commercial Supersonic Technology written by National Research Council and published by National Academies Press. This book was released on 2002-02-16 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed flight is a major technological challenge for both commercial and business aviation. As a first step in revitalizing efforts by the National Aeronautics and Space Administration (NASA) to achieve the technology objective of high-speed air travel, NASA requested the National Research Council (NRC) to conduct a study that would identify approaches for achieving breakthroughs in research and technology for commercial supersonic aircraft. Commercial Supersonic Technology documents the results of that effort. This report describes technical areas where ongoing work should be continued and new focused research initiated to enable operational deployment of an environmentally acceptable, economically viable commercial aircraft capable of sustained supersonic flight, including flight over land, at speeds up to approximately Mach 2 in the next 25 years or less.
Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1981 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supersonic Business Jets in Preliminary Aircraft Design written by Martin Schuermann and published by Cuvillier Verlag. This book was released on 2016-07-05 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Preliminary Aircraft Design and Optimisation tool, PrADO, is an in-house program of the Institute of Aircraft Design and Lightweight Structures, TU Braunschweig, Germany, which covers a wide range of aspects of aircraft preliminary design. An initial aircraft concept serves as a basis for various analysis modules. Each module is designated to fulfil one special task e.g. aerodynamic analysis, estimation of structural mass, etc. The available methods grouped within those modules range from statistical methods to physics based models. From an aircraft developer’s point of view PrADO is used within both, the conceptual and the preliminary design phase. The aim of this thesis is to introduce methods and methodologies to aircraft conceptual and preliminary design, more precisely to PrADO, that allow to judge supersonic aircraft concepts. Therefore, the aerodynamic analysis module, the structural analysis module and the propulsion module are extended. An inviscid flow solver is integrated to obtain aerodynamic coefficients. The calculated data serves as input to other analysis modules of PrADO. While the aerodynamic analysis module solely uses the outer geometry of the aircraft, the structural analysis module uses its internal structural layout as additional input to a herein developed finite element model generator. The distribution of secondary mass, fuel loading and payload distributions as well as loads for ground cases and trimmed flight cases are taken from the PrADO database, whereas the aerodynamic forces are calculated by solving the inviscid Euler equations. The model serves as basis for structural sizing and consequently the estimation of structural mass. The purpose of the propulsion module is to size the engine, to calculate the engine performance map and to provide reliable mass data based on the thermodynamic cycle. PrADO provides various models for the analysis of turbojet, turbofan and turboprop engines. It is extended by a turbofan engine with mixed exhaust flow. The verification of the aerodynamic data is solely based on its expected qualitative distribution, since data from higher order methods was not available for the time being. The results compare well with the expected behaviour. The structural sizing process is verified based on an example from literature. The results of the developed sizing algorithm show extraordinary agreement with the reference data. The extended aircraft design process is finally applied to an aircraft from the European research project HISAC. The results compare well with global aircraft data. An excursion into the field of temperature effects in supersonic flight is provided, since no relevant literature is found on the topic with regard to conceptual and preliminary aircraft design. The results are translated into helpful information on the material selection process in the stage of aircraft pre-design. Eventually, the tool chain is applied to analyse a supersonic business jet and the results are presented. Based on the results of this basic design, a parameter study is conducted. A combination of cruise Mach number and design range is varied. Global design parameters show expected sensitivity to such variations. Das am Institut für Flugzeugbau und Leichtbau der TU Braunschweig entwickelte Programm PrADO (Preliminary Aircraft Design and Optimisation tool) stellt Werkzeuge zur Analyse und Beurteilung von Flugzeugen in der Konzept- und Vorentwurfsphase bereit. Basis der Analyse ist ein erstes Flugzeugkonzept. Jedes Entwurfsmodul gruppiert Methoden zur Lösung einer Teilaufgabe im Vorentwurfsprozess, z.B. Bestimmung der aerodynamischen Beiwerte oder Masseanalyse. Die vorhandenen Methoden reichen von einfachen Abschätzungsformeln bis hin zu physikalisch begründeten Berechnungsmodellen. Die Zielsetzung dieser Arbeit ist es, Methoden in die Konzept- und Vorentwurfsphase, genauer in das Programm PrADO, einzuführen, welche die Bewertung von Überschallflugzeugen ermöglichen. Daher werden die aerodynamischen, strukturmechanischen und antriebsspezifischen Entwurfsmodule erweitert. Zur Berechnung der aerodynamischen Beiwerte wird ein Euler-Verfahren eingesetzt. Die Ergebnisse stehen anderen Entwurfsmodulen in Form von Kennfeldern zur Verfügung. Das strukturmechanische Modell benötigt, neben der äußeren Geometrie, auch den inneren Aufbau des Flugzeugs. Diese Daten bilden die Grundlage eines Finite-Elemente-Modells. Die Verteilung von Sekundärmassen, Kraftstoff und Nutzlast, sowie Lasten für Boden- und ausgetrimmte Flugfälle werden der PrADO-Datenbank entnommen. Die aerodynamischen Kräfte werden mit dem Euler-Verfahren berechnet und auf das Modell aufgeprägt. Das Modell bildet die Basis zur Strukturdimensionierung und somit der Berechnung der Strukturmasse. Die Aufgabe des Antriebsmoduls ist die Triebwerksgröße zu bestimmen, Triebwerkskennfelder bereitzustellen und die Masse des Antriebssystems zu berechnen. Das Modul wird um ein Zweikreis-Turbinenluftstrahltriebwerk mit Mischung von Primär- und Sekundärstrom ergänzt. Die qualitativen Verläufe der aerodynamischen Beiwerte entsprechen dem zu erwartenden Verhalten. Für einen quantitativen Vergleich stehen keine Vergleichsdaten aus höherwertigen Verfahren zur Verfügung. Das erweiterte Strukturanalysemodul wird auf ein Literaturbeispiel angewendet. Die Ergebnisse zeigen eine sehr gute Übereinstimmung mit den Daten. Nach der Verifikation der Einzelmodule wird der Gesamtentwurfsprozess an einem Flugzeug des europäischen Projekts HISAC überprüft. Die globalen Entwurfsergebnisse zeigen sehr gute Übereinstimmungen mit den verfügbaren Referenzdaten. Die im Überschallflug auftretenden thermischen Aspekte werden in einem kurzen Exkurs behandelt. Dies erscheint notwendig, da zu diesem Thema keine, auf den Vorentwurf bezogene Literatur gefunden wurde. Die Ergebnisse geben dem Ingenieur erste Hinweise zur Materialauswahl im Rahmen der Konzept- und Vorentwurfsphase. Schlussendlich wird der erweiterte Entwurfsprozess zum Entwurf eines Überschallgeschäftsreiseflugzeugs genutzt. Auf Basis der gewonnenen Erkenntnisse wird eine Parameterstudie durchgeführt. Die Sensitivitäten der globalen Entwurfsparameter bei Änderungen von Machzahl und Reichweite werden gut wiedergegeben.
Download or read book The Supersonic Transport written by United States. Congress. Joint Economic Committee. Subcommittee on Priorities and Economy in Government and published by . This book was released on 1973 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Reference Publication written by and published by . This book was released on 1977 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA SP written by and published by . This book was released on 1988 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book First Annual High Speed Research Workshop Part 1 written by and published by . This book was released on 1992 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aviation and the Global Atmosphere written by Joyce E. Penner and published by Cambridge University Press. This book was released on 1999-06-28 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Intergovernmental Panel on Climate Change Special Report is the most comprehensive assessment available on the effects of aviation on the global atmosphere. The report considers all the gases and particles emitted by aircraft that modify the chemical properties of the atmosphere, leading to changes in radiative properties and climate change, and modification of the ozone layer, leading to changes in ultraviolet radiation reaching the Earth. This volume provides accurate, unbiased, policy-relevant information and is designed to serve the aviation industry and the expert and policymaking communities.
Download or read book Securing the Future of U S Air Transportation written by National Research Council and published by National Academies Press. This book was released on 2003-12-18 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: As recently as the summer of 2001, many travelers were dreading air transportation because of extensive delays associated with undercapacity of the system. That all changed on 9/11, and demand for air transportation has not yet returned to peak levels. Most U.S. airlines continue to struggle for survival, and some have filed for bankruptcy. The situation makes it difficult to argue that strong action is urgently needed to avert a crisis of undercapacity in the air transportation system. This report assesses the visions and goals for U.S. civil aviation and technology goals for the year 2050.
Download or read book Hydrogen Aircraft Technology written by G.Daniel Brewer and published by Routledge. This book was released on 2017-11-22 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid hydrogen is shown to be the ideal fuel for civil transport aircraft, as well as for many types of military aircraft. Hydrogen Aircraft Technology discusses the potential of hydrogen for subsonic, supersonic, and hypersonic applications. Designs with sample configurations of aircraft for all three speed categories are presented, in addition to performance comparisons to equivalent designs for aircraft using conventional kerosine-type fuel and configurations for aircraft using liquid methane fuel. Other topics discussed include conceptual designs of the principal elements of fuel containment systems required for cryogenic fuels, operational elements (e.g., pumps, valves, pressure regulators, heat exchangers, lines and fittings), modifications for turbine engines to maximize the benefit of hydrogen, safety aspects compared to kerosine and methane fueled designs, equipment and facility designs for servicing hydrogen-fueled aircraft, production methods for liquid hydrogen, and the environmental advantages for using liquid hydrogen. The book also presents a plan for conducting the necessary development of technology and introducing hydrogen fuel into the worldwide civil air transport industry. Hydrogen Aircraft Technology will provide fascinating reading for anyone interested in aircraft and hydrogen fuel designs.
Download or read book 1993 NASA Authorization written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Technology and Competitiveness and published by . This book was released on 1992 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1978-03 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book Fluid Dynamics Research on Supersonic Aircraft written by North Atlantic Treaty Organization. Research and Technology Organization and published by . This book was released on 1998 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the lecture notes prepared for a Special Course on Fluid Dynamics Research on Supersonic Aircraft organized by the RTO Applied Vehicle Technology Panel (AVT). The Course was held at the von Kármán Institute for Fluid Dynamics (VKI) Institute, Rhode-Saint-Genèse, Belgium 25-29 May 1998. The following topics were covered: History & Economics of Supersonic Transports, Supersonic Aerodynamics, Sonic Boom Theory and Minimization, Multi-Point Design Challenges, Vortex Plume Interactions, Propulsion System Design. Presentations on the major world wide supersonic transport programs were also included. The material assembled in this publication was prepared under the combined sponsorship of the RTO Applied Vehicle Technology Panel, the Consultant and Exchange Program of RTO, and the von Kármán Institute (VKI) for Fluid Dynamics.
