Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2012-01-25 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing and building structures that will withstand the unique challenges that exist in Subsea operations is no easy task. As deepwater wells are drilled to greater depths, engineers are confronted with a new set problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility, to name just a few. A definitive reference for engineers designing, analyzing and instilling offshore structures, Subsea Structural Engineering Handbook provides an expert guide to the key processes, technologies and equipment that comprise contemporary offshore structures.Written in a clear and easy to understand language, the book is based on the authors 30 years of experience in the design, analysis and instillation of offshore structures. This book answers the above mentioned crucial questions as well as covers the entire spectrum of subjects in the discipline, from route selection and planning to design, construction, installation, materials and corrosion, inspection, welding, repair, risk assessment, and applicable design solutions. It yields a roadmap not only for the subsea engineer but also the project managers, estimators and regulatory personnel hoping to gain an appreciation of the overall issues and directed approaches to subsea engineering design solutions. - Up-to-date technical overview of deepwater riser engineering - Easy to understand Coverage of design, analysis and, stallation - Addresses issues concerning both fixed and floating platforms - Covers techincal equipment such as Subsea Control Systems, Pressure Piping, Connectors and Equipment - Layout as well as Remotely-operated vehicles

Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2012-01-13 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea production systems, overview of subsea engineering, subsea field development, subsea distribution system. Flow assurance and system engineering. Susea structure and equiment. Subsea umbilical, risers and flowlines.

Download or read book Subsea Pipeline Design Analysis and Installation written by Qiang Bai and published by Gulf Professional Publishing. This book was released on 2014-02-18 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. - Gain expert coverage of international design codes - Understand how to design pipelines and risers for today's deepwater oil and gas - Master critical equipment such as subsea control systems and pressure piping

Download or read book Springer Handbook of Ocean Engineering written by Manhar R. Dhanak and published by Springer. This book was released on 2016-07-23 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is the definitive reference for the interdisciplinary field that is ocean engineering. It integrates the coverage of fundamental and applied material and encompasses a diverse spectrum of systems, concepts and operations in the maritime environment, as well as providing a comprehensive update on contemporary, leading-edge ocean technologies. Coverage includes an overview on the fundamentals of ocean science, ocean signals and instrumentation, coastal structures, developments in ocean energy technologies and ocean vehicles and automation. It aims at practitioners in a range of offshore industries and naval establishments as well as academic researchers and graduate students in ocean, coastal, offshore and marine engineering and naval architecture. The Springer Handbook of Ocean Engineering is organized in five parts: Part A: Fundamentals, Part B: Autonomous Ocean Vehicles, Subsystems and Control, Part C: Coastal Design, Part D: Offshore Technologies, Part E: Energy Conversion

Download or read book Handbook of Bottom Founded Offshore Structures written by Jan H. Vugts and published by Eburon Uitgeverij B.V.. This book was released on 2013-12-01 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Engineering continues to develop and expand rapidly. While in the public eye its focus has shifted towards subsea and floating developments in ever deeper waters, bottom founded structures are still at the industry’s heart. The fixed structure remains its dependable workhorse and even today newly installed fixed structures far outnumber subsea and floating applications. Additionally, the knowledge and technology that have (literally) pushed the boundaries of Offshore Engineering into ever more demanding environments and water depths have been largely pioneered by bottom founded structures. An engineer’s central skill is to develop coherent and balanced models for the problems encountered. Regrettably, due to availability of ever more sophisticated computer applications this expertise is at risk of getting lost, and adopting computer outcomes without truly understanding the models and their limitations is naive, risky and unprofessional. Therefore, every engineer needs fundamental knowledge and understanding of underlying theories and technologies. This Handbook is intended to help offshore engineers acquire and sustain relevant expertise in some notoriously difficult subjects. It attempts to stimulate reflection and critical evaluation of the models used and the strengths and weaknesses of the solutions found. While dealing more specifically with bottom founded structures, the material is generally applicable to offshore structures of all types. The Handbook can be used as a textbook for Master’s students and as a manual and reference guide for practising professionals.

Download or read book Subsea Pipelines and Risers written by Yong Bai and published by Elsevier. This book was released on 2005-12-05 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Updated edition of a best-selling title • Author brings 25 years experience to the work • Addresses the key issues of economy and environment Marine pipelines for the transportation of oil and gas have become a safe and reliable way to exploit the valuable resources below the world's seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve in its quest to reduce costs and minimise the effect on the environment. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.

Download or read book Offshore Operations and Engineering written by Shashi Shekhar Prasad Singh and published by CRC Press. This book was released on 2019-12-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive understanding of each aspect of offshore operations including conventional methods of operations, emerging technologies, legislations, health, safety and environment impact of offshore operations. The book starts by coverage of notable offshore fields across the globe and the statistics of present oil production, covering all types of platforms available along with their structural details. Further, it discusses production, storage and transportation, production equipment, safety systems, automation, storage facilities and transportation. Book ends with common legislation acts and comparison of different legislation acts of major oil/gas producing nations. The book is aimed at professionals and researchers in petroleum engineering, offshore technology, subsea engineering, and Explores the engineering, technology, system, environmental, operational and legislation aspects of offshore productions systems Covers most of the subsea engineering material in a concise manner Includes legislation of major oil and gas producing nations pertaining to offshore operations (oil and gas) Incorporates case studies of major offshore operations (oil and gas) accidents and lessons learnt Discusses environment impact of offshore operations

Download or read book Standard Handbook of Petroleum and Natural Gas Engineering Volume 1 written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 1996-10-16 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineering now has its own true classic handbook that reflects the profession's status as a mature major engineering discipline. Formerly titled the Practical Petroleum Engineer's Handbook, by Joseph Zaba and W.T. Doherty (editors), this new, completely updated two-volume set is expanded and revised to give petroleum engineers a comprehensive source of industry standards and engineering practices. It is packed with the key, practical information and data that petroleum engineers rely upon daily. The result of a fifteen-year effort, this handbook covers the gamut of oil and gas engineering topics to provide a reliable source of engineering and reference information for analyzing and solving problems. It also reflects the growing role of natural gas in industrial development by integrating natural gas topics throughout both volumes. More than a dozen leading industry experts-academia and industry-contributed to this two-volume set to provide the best , most comprehensive source of petroleum engineering information available.

Download or read book Offshore Structures written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2019-11-06 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Structures: Design, Construction and Maintenance, Second Edition covers all types of offshore structures and platforms employed worldwide. As the ultimate reference for selecting, operating and maintaining offshore structures, this book provides a roadmap for designing structures which will stand up even in the harshest environments. Subsea pipeline design and installation is also covered in this edition, as is the selection of the proper type of offshore structure, the design procedure for the fixed offshore structure, nonlinear analysis (Push over) as a new technique to design and assess the existing structure, and more. With this book in hand, engineers will have the most up-to-date methods for performing a structural lifecycle analysis, implementing maintenance plans for topsides and jackets and using non-destructive testing. - Provides a one-stop guide to offshore structure design and analysis - Presents easy-to-understand methods for structural lifecycle analysis - Contains expert advice for designing offshore platforms for all types of environments

Download or read book Handbook of Offshore Oil and Gas Operations written by James G. Speight and published by Elsevier. This book was released on 2014-10-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. - Quickly become familiar with the oil and gas offshore industry, including deepwater operations - Understand the full spectrum of the business, including environmental impacts and future challenges - Gain knowledge and exposure on critical standards and real-world case studies

Download or read book Offshore Pipelines written by Boyun Guo and published by Elsevier. This book was released on 2005-04-25 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering.* Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety.* Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner.* Deepwater pipelining is a new technology developed in the past ten years and growing quickly.

Download or read book Subsea Pipeline Integrity and Risk Management written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2014-02-21 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea repairs and inspection are costly for petroleum and pipeline engineers and proper training is needed to focus on ensuring system strength and integrity. Subsea Pipeline Integrity and Risk Management is the perfect companion for new engineers who need to be aware of the state-of-the-art techniques. This handbook offers a "hands-on" problem-solving approach to integrity management, leak detection, and reliability applications such as risk analysis. Wide-ranging and easy-to-use, the book is packed with data tables, illustrations, and calculations, with a focus on pipeline corrosion, flexible pipes, and subsea repair. Reliability-based models also provide a decision making tool for day-to-day use. Subsea Pipeline Integrity and Risk Management gives the engineer the power and knowledge to protect offshore pipeline investments safely and effectively. - Includes material selection for linepipe, especially selection of standard carbon steel linepipe - Covers assessment of various types of corrosion processes and definition of anti-corrosion design against internal as well as external corrosion - Gives process and flow assurance for pipeline systems including pipeline integrity management

Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today's subsea technology. - Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies - Learn and review the applicable standards and specifications from API and ISO in one convenient location - Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)

Download or read book Deepwater Foundations and Pipeline Geomechanics written by William O. McCarron and published by J. Ross Publishing. This book was released on 2011-09-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practicing engineers in the offshore and reservoir engineering industry will find this timely volume filled with practical advice and expert information on current oil field development from oil exploration to production.

Download or read book Subsea Pipeline Engineering written by Andrew Clennel Palmer and published by PennWell Books. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea Pipeline Engineering was the first of its kind, written by two of the world's most respected authorities in subsea pipeline engineering. In the second edition, these industry veterans have updated their definitive reference book, covering the entire spectrum of subjects in the discipline, from route selection and planning to design, construction, installation, materials and corrosion, inspection, welding, repair, risk assessment, and applicable design codes and standards. Particular attention is also devoted to the important specialized subjects of hydraulics, strength, stability, fracture, upheaval, lateral buckling and decommissioning. The book is distilled from the authors' vast experience in industry and their world-renowned course on Subsea Pipeline Engineering.

Download or read book Offshore Projects and Engineering Management written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2021-06-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Projects and Engineering Management delivers a critical training tool for engineers on how to prepare cost estimates and understand the most recent management methods. Specific to the oil and gas offshore industry, the reference dives into project economics, interface management and contracts. Methods for analyzing risk, activity calculations and risk response strategies are covered for offshore, FPSO and pipelines. Supported with case studies, detailed discussions, and practical applications, this comprehensive book gives oil and gas managers a management toolbox to extend asset life, reduce costs and minimalize impact to personnel and environment. Oil and gas assets are under constant pressure and engineers and managers need engineering management training and strategies to ensure their operations are safe and cost effective. This book helps manage the ramp up to the management of offshore structures. - Discusses engineering management for new and existing offshore platforms, including FPSOs and subsea pipelines - Presents everything a reader needs to understand the most recent PMP modules and management methods - Provides the best tools, tactics and forms through several practical case studies

Download or read book Handbook of Multiphase Flow Assurance written by Taras Y. Makogon and published by Gulf Professional Publishing. This book was released on 2019-06-04 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Multiphase Flow Assurance allows readers to progress in their understanding of basic phenomena and complex operating challenges. The book starts with the fundamentals, but then goes on to discuss phase behavior, fluid sampling, fluid flow properties and fluid characterization. It also covers flow assurance impedance, deliverability, stability and integrity issues, as well as hydraulic, thermal and risk analysis. The inclusion of case studies and references helps provide an industrial focus and practical application that makes the book a novel resource for flow assurance management and an introductory reference for engineers just entering the field of flow assurance. - Starts with flow assurance fundamentals, but also includes more complex operating challenges - Brings together cross-disciplinary discussions and solutions of flow assurance in a single text - Offers case studies and reference guidelines for practical applications