Download or read book Studies on the Hot Cracking Behaviour of Aluminium Alloys written by David Warrington and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Cracking Phenomena in Welds II written by Thomas Böllinghaus and published by Springer Science & Business Media. This book was released on 2008-08-07 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 – Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007.
Download or read book Stress corrosion Cracking of Aluminum Alloys written by F. H. Haynie and published by . This book was released on 1966 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report deals with the stress-corrosion cracking of aluminum alloys, and it represents an effort by DMIC to expand on the information contained in DMIC Memorandum 202, 'Stress-Corrosion Cracking of Aluminum Alloys', dated February 15, 1965. DMIC Report 228 begins by presenting a comprehensive definition of stress-corrosion cracking. This is followed by sections dealing with (1) the historical development and growth in awareness of the problem, (2) the mechanisms involved, and (3) the theory of stress-corrosion cracking. A section on experimental techniques is presented. These techniques include test methods used to determine the susceptibility of alloys to stress-corrosion cracking, as well as more refined methods of studying the fundamental mechanisms of the problem. Different evaluation methods, applicable to obtaining the different objectives of stress-corrosion testing, are also presented. All of the foregoing serve as background to the sections on stress-corrosion-cracking behavior of aluminum alloys and preventive measures. (Author).
Download or read book Methods of Determining the Hot Cracking Resistance of Aluminium Alloys written by S Gavrilin and published by . This book was released on 1998 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fractographic Analysis of Aluminium Alloy Weld Hot Cracking written by Li Hongqi and published by . This book was released on 1980 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Cracking Phenomena in Welds III written by John Lippold and published by Springer Science & Business Media. This book was released on 2011-05-03 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third in a series of compendiums devoted to the subject of weld hot cracking. It contains 22 papers presented at the 3rd International Hot Cracking Workshop in Columbus, Ohio USA in March 2010. In the context of this workshop, the term “hot cracking” refers to elevated temperature cracking associated with either the weld metal or heat-affected zone. These hot cracking phenomena include weld solidification cracking, HAZ and weld metal liquation cracking, and ductility-dip cracking. The book is divided into three major sections based on material type; specifically aluminum alloys, steels, and nickel-base alloys. Each of these sections begins with a keynote paper from prominent researchers in the field: Dr. Sindo Kou from the University of Wisconsin, Dr. Thomas Böllinghaus from BAM and the University of Magdeburg, and Dr. John DuPont from Lehigh University. The papers contained within include the latest insight into the mechanisms associated with hot cracking in these materials and methods to prevent cracking through material selection, process modification, or other means. The three Hot Cracking Phenomena in Welds compendiums combined contain a total of 64 papers and represent the best collection of papers on the topic of hot cracking ever assembled.
Download or read book Hot Cracking Phenomena in Welds written by Thomas Böllinghaus and published by Springer Science & Business Media. This book was released on 2005-10-20 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the avoidance of hot cracking still represents a major topic in modern fabrication welding components, the phenomena have not yet been fully understood. Through the 20 individual contributions from experts all over the world the present state of knowledge about hot cracking during welding is defined, and the subject is approached from four different viewpoints. The first chapter provides an overview of the various hot cracking phenomena. Different mechanisms of solidification cracking proposed in the past decades are summarized and new insight is particularly given into the mechanism of ductility dip cracking. The effects of different alloying elements on the hot cracking resistance of various materials are shown in the second chapter and, as a special metallurgical effect, the initiation of stress corrosion cracking at hot cracks has been highlighted. The third chapter outlines how numerical analyses and other modelling techniques can be utilized to describe hot cracking phenomena and how such results might contribute to the explanation of the mechanisms. Various hot cracking test procedures are presented in the final chapter with a special emphasis on standardization. For the engineering and natural scientists in research and development the book provides both, new insight and a comprehensive overview of hot cracking phenomena in welds. The contributions additionally give numerous individual solutions and helpful advice for international welding engineers to avoid hot cracking in practice. Furthermore, it represents a very helpful tool for upper level metallurgical and mechanical engineering students.
Download or read book Stress corrosion Cracking of Aluminum Alloys written by F. R. Mertens and published by . This book was released on 1967 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Cracking Phenomena in Welds III written by John Lippold and published by Springer. This book was released on 2011-05-13 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third in a series of compendiums devoted to the subject of weld hot cracking. It contains 22 papers presented at the 3rd International Hot Cracking Workshop in Columbus, Ohio USA in March 2010. In the context of this workshop, the term “hot cracking” refers to elevated temperature cracking associated with either the weld metal or heat-affected zone. These hot cracking phenomena include weld solidification cracking, HAZ and weld metal liquation cracking, and ductility-dip cracking. The book is divided into three major sections based on material type; specifically aluminum alloys, steels, and nickel-base alloys. Each of these sections begins with a keynote paper from prominent researchers in the field: Dr. Sindo Kou from the University of Wisconsin, Dr. Thomas Böllinghaus from BAM and the University of Magdeburg, and Dr. John DuPont from Lehigh University. The papers contained within include the latest insight into the mechanisms associated with hot cracking in these materials and methods to prevent cracking through material selection, process modification, or other means. The three Hot Cracking Phenomena in Welds compendiums combined contain a total of 64 papers and represent the best collection of papers on the topic of hot cracking ever assembled.
Download or read book Eleventh Report to the Alloys Research Committee on Some Alloys of Aluminium light Alloys written by Walter Rosehain and published by . This book was released on 1921 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties in the Semi solid State and Hot Tearing of Aluminum Alloys written by and published by . This book was released on 2004 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy of Direct Chill Casting of Aluminum Alloys written by Dmitry G. Eskin and published by CRC Press. This book was released on 2008-04-17 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulling together information previously scattered throughout numerous research articles into one detailed resource, this book connects the fundamentals of structure formation during solidification with the practically observed structure and defect patterns in billets and ingots. The author examines the formation of a structure, properties, and defects in the as-cast material in tight correlation to the physical phenomena involved in the solidification and the process parameters. Compiling recent results and data, the book discusses the fundamentals of solidification together with metallurgical and technological aspects of DC casting. It gives new insight and perspective into DC casting research.
Download or read book The Welding of Aluminium and Its Alloys written by G Mathers and published by Elsevier. This book was released on 2002-09-24 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Welding of Aluminium and its Alloys is a practical user's guide to all aspects of welding aluminium and aluminium alloys. It provides a basic understanding of the metallurgical principles involved showing how alloys achieve their strength and how the process of welding can affect these properties. The book is intended to provide engineers with perhaps little prior understanding of metallurgy and only a brief acquaintance with the welding processes involved with a concise and effective reference to the subject.It is intended as a practical guide for the Welding Engineer and covers weldability of aluminium alloys; process descriptions, advantages, limitations, proposed weld parameters, health and safety issues; preparation for welding, quality assurance and quality control issues along with problem solving.The book includes sections on parent metal storage and preparation prior to welding. It describes the more frequently encountered processes and has recommendations on welding parameters that may be used as a starting point for the development of a viable welding procedure. Included in these chapters are hints and tips to avoid some of the pitfalls of welding these sometimes-problematic materials. The content is both descriptive and qualitative. The author has avoided the use of mathematical expressions to describe the effects of welding.This book is essential reading for welding engineers, production engineers, production managers, designers and shop-floor supervisors involved in the aluminium fabrication industry. - A practical user's guide by a respected expert to all aspects of welding of aluminium - Designed to be easily understood by the non-metallurgist whilst covering the most necessary metallurgical aspects - Demonstrates best practice in fabricating aluminium structures
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminium Alloy Structures written by Federico Mazzolani and published by CRC Press. This book was released on 1994-12-15 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the ways in which aluminium and its alloys satisfy the requirements of civil engineering structures and the applications in which they compete with steel. The first edition has become known as an authoritative design reference book on the subject.
Download or read book Aluminium Alloys written by Jürgen Hirsch and published by John Wiley & Sons. This book was released on 2008-11-17 with total page 2580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is a well established modern lightweight engineering and functional material with a unique combination of specific properties like strengh, formability, durability, conductivity, corrosion resistance, etc. It is present in many intelligent solutions in established markets like building, transport, packaging, printing, and many others, in our fast moving modern society. The various aluminium alloys can be processed quite efficiently in large quantities by conventional fabrication routes, as well as in special sophisticated forms and material combinations for highly innovative high–tec solutions and applications. This book contains latest information about all these aspects in form of the refereed papers of the II th International Conference on Aluminium Alloys "ICAA", where world–wide experts from academia and engineers from industry present latest results and new ideas in fundamental as well as applied research. Since 22 years the ICAA series provides scientists and engineers with a complete overview over the latest scientific and technological developments, featuring profound technology–based overviews and new innovative perspectives. This book is a reference for the scientific community as well as for the aluminium industry working on aluminium alloy development, processing and application issues. It gives a global perspective on the current focus of international research with emphasis on in–depth understanding of specific properties and applications of conventional and advanced aluminium alloys.
Download or read book Solidification and Casting written by G. J. Davies and published by . This book was released on 1973 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
