Download or read book Progress in Turbulence VI written by Joachim Peinke and published by Springer. This book was released on 2016-03-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the edited and reviewed contributions presented in the 6th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume has been produced after the conference so that the authors had the possibility to incorporate comments and discussions raised during the meeting. In the present book the contributions have been structured according to the topics : I Theory II Wall bounded flows III Particles in flows IV Free flows V Complex flows The volume is dedicated to the memory of Prof. Konrad Bajer who prematurely passed away in Warsaw on August 29, 2014.

Download or read book Progress in Turbulence III written by Joachim Peinke and published by Springer Science & Business Media. This book was released on 2009-12-28 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third issue on “progress in turbulence” is based on the third ITI conference (ITI interdisciplinary turbulence initiative), which took place in Bertinoro, North Italy. Researchers from the engineering and physical sciences gathered to present latest results on the rather notorious difficult and essentially unsolved problem of turbulence. This challenge is driving us in doing basic as well as applied research. Clear progress can be seen from these contributions in different aspects. New - phisticated methods achieve more and more insights into the underlying compl- ity of turbulence. The increasing power of computational methods allows studying flows in more details. Increasing demands of high precision large turbulence - periments become aware. In further applications turbulence seem to play a central issue. As such a new field this time the impact of turbulence on the wind energy conversion process has been chosen. Beside all progress our ability to numerically calculate high Reynolds number turbulent flows from Navier-Stokes equations at high precision, say the drag co- ficient of an airfoil below one percent, is rather limited, not to speak of our lack of knowledge to compute this analytically from first principles. This is rather - markable since the fundamental equations of fluid flow, the Navier-Stokes eq- tions, have been known for more than 150 years.

Download or read book Progress in Turbulence V written by Alessandro Talamelli and published by Springer Science & Business Media. This book was released on 2013-08-26 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the edited and reviewed contributions presented in the 5th iTi Conference in Bertinoro covering fundamental aspects in turbulent flows. In the spirit of the iTi initiative, the volume is produced after the conference so that the authors had the possibility to incorporate comments and discussions raised during the meeting. Turbulence presents a large number of aspects and problems, which are still unsolved and which challenge research communities in engineering and physical sciences both in basic and applied research. The book presents recent advances in theory related to new statistical approaches, effect of non-linearities and presence of symmetries. This edition presents new contributions related to the physics and control of laminar-turbulent transition in wall-bounded flows, which may have a significant impact on drag reduction applications. Turbulent boundary layers, at increasing Reynolds number, are the main subject of both computational and experimental long research programs aimed at improving our knowledge on scaling, energy distribution at different scales, structure eduction, roughness effects to name only a few. Like previous editions several numerical and experimental analysis of complex flows, mostly related to applications, are presented. The structure of the present book is as such that contributions have been bundled according to covering topics i.e. I Theory, II Stability, III Wall bounded flows, IV, Complex flows, V Acoustic, VI Numerical methods. The volume is dedicated to the memory of Prof. Rudolf Friedrich who prematurely died in Münster/Germany on the 16th of August 2012. In his honor the conference has started with a special session dedicated to his work.

Download or read book Advances in DNS LES written by Chaoqun Liu and published by . This book was released on 1997 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Turbulence VII written by Uriel Frisch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Turbulence VII contains an overview of the state of turbulence research with some bias towards work done in Europe. It represents an almost complete collection of the invited and contributed papers delivered at the Seventh European Turbulence Conference, sponsored by EUROMECH and ERCOFTAC and organized by the Observatoire de la Côte d'Azur. New high-Reynolds number experiments combined with new techniques of imaging, non-intrusive probing, processing and simulation provide high-quality data which put significant constraints on possible theories. For the first time, it has been shown, for a class of passive scalar problems, why dimensional analysis sometimes gives the wrong answers and how anomalous intermittency corrections can be calculated from first principles. The volume is thus geared towards specialists in the area of flow turbulence who could not attend the conference as well as anybody interested in this rapidly moving field.

Download or read book Progress in Turbulence VII written by Ramis Örlü and published by Springer. This book was released on 2017-06-26 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the edited and reviewed contribution presented in the 7th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume is produced after the conference so that the authors had the opportunity to incorporate comments and discussions raised during the meeting. In the present book, the contributions have been structured according to the topics: I Theory II Wall bounded flows III Pipe flow IV Modelling V Experiments VII Miscellaneous topics

Download or read book Recent Advances in DNS and LES written by Doyle Knight and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers presents a broad range of topics in DNS and LES, from new developments in LES modeling to DNS and LES for supersonic and hypersonic boundary layers. The book provides an extensive view of the state of the art in the field.

Download or read book Modeling and Practice of Erosion and Sediment Transport under Change written by Mohamed Meddi and published by MDPI. This book was released on 2019-09-17 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate and anthropogenic changes impact the conditions of erosion and sediment transport in rivers. Rainfall variability and, in many places, the increase of rainfall intensity have a direct impact on rainfall erosivity. Increasing changes in demography have led to the acceleration of land cover changes in natural areas, as well as in cultivated areas, and, sometimes, in degraded areas and desertified landscapes. These anthropogenized landscapes are more sensitive to erosion. On the other hand, the increase in the number of dams in watersheds traps a great portion of sediment fluxes, which do not reach the sea in the same amount, nor at the same quality, with consequences on coastal geomorphodynamics. This book is dedicated to studies on sediment fluxes from continental areas to coastal areas, as well as observation, modeling, and impact analysis at different scales from watershed slopes to the outputs of large river basins. This book is concentrated on a number of keywords: “erosion” and “sediment transport”, “model” and “practice”, and “change”. The keywords are briefly discussed with respect to the relevant literature. The contributions in this book address observations and models based on laboratory and field data, allowing researchers to make use of such resources in practice under changing conditions.

Download or read book Distinct Aerodynamics of Insect Scale Flight written by Csaba Hefler and published by Cambridge University Press. This book was released on 2021-05-27 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insect-scale flapping wing flight vehicles can conduct environmental monitoring, disaster assessment, mapping, positioning and security in complex and challenging surroundings. To develop bio-inspired flight vehicles, systematic probing based on the particular category of flight vehicles is needed. This Element addresses the aerodynamics, aeroelasticity, geometry, stability and dynamics of flexible flapping wings in the insect flight regime. The authors highlight distinct features and issues, contrast aerodynamic stability between rigid and flexible wings, present the implications of the wing-aspect ratio, and use canonical models and dragonflies to elucidate scientific insight as well as technical capabilities of bio-inspired design.

Download or read book High Performance Computing written by Mateo Valero and published by Springer Science & Business Media. This book was released on 2000-09-27 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third International Symposium on High-Performance Computing, ISHPC 2000, held in Tokyo, Japan in October 2000. The 15 revised full papers presented together with 16 short papers and five invited contributions were carefully reviewed and selected from 53 submissions. Also included are 20 refereed papers from two related workshops. The book offers topical sections on compilers, architectures and evaluation; algorithms, models, and applications; OpenMP: experiences and implementations; and simulation and visualization.

Download or read book Variable Density Fluid Turbulence written by P. Chassaing and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part aims at providing the physical and theoretical framework of the analysis of density variations in fully turbulent flows. Its scope is deliberately educational. In the second part, basic data on dynamical and scalar properties of variable density turbulent flows are presented and discussed, based on experimental data and/or results from direct numerical simulations. This part is rather concerned with a research audience. The last part is more directly devoted to an engineering audience and deals with prediction methods for turbulent flows of variable density fluid. Both first and second order, single point modeling are discussed, with special emphasis on the capability to include specific variable density / compressibility effects.

Download or read book Progress in Turbulence VII written by Ramis Örlü and published by Springer. This book was released on 2018-08-02 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the edited and reviewed contribution presented in the 7th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume is produced after the conference so that the authors had the opportunity to incorporate comments and discussions raised during the meeting. In the present book, the contributions have been structured according to the topics: I Theory II Wall bounded flows III Pipe flow IV Modelling V Experiments VII Miscellaneous topics

Download or read book The Design of Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2021-02-18 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear and its associated systems represent a compelling design challenge: simultaneously a system, a structure, and a machine, it supports the aircraft on the ground, absorbs landing and braking energy, permits maneuvering, and retracts to minimize aircraft drag. Yet, as it is not required during flight, it also represents dead weight and significant effort must be made to minimize its total mass. The Design of Aircraft Landing Gear, written by R. Kyle Schmidt, PE (B.A.Sc. - Mechanical Engineering, M.Sc. - Safety and Aircraft Accident Investigation, Chairman of the SAE A-5 Committee on Aircraft Landing Gear), is designed to guide the reader through the key principles of landing system design and to provide additional references when available. Many problems which must be confronted have already been addressed by others in the past, but the information is not known or shared, leading to the observation that there are few new problems, but many new people. The Design of Aircraft Landing Gear is intended to share much of the existing information and provide avenues for further exploration. The design of an aircraft and its associated systems, including the landing system, involves iterative loops as the impact of each modification to a system or component is evaluated against the whole. It is rare to find that the lightest possible landing gear represents the best solution for the aircraft: the lightest landing gear may require attachment structures which don't exist and which would require significant weight and compromise on the part of the airframe structure design. With those requirements and compromises in mind,The Design of Aircraft Landing Gear starts with the study of airfield compatibility, aircraft stability on the ground, the correct choice of tires, followed by discussion of brakes, wheels, and brake control systems. Various landing gear architectures are investigated together with the details of shock absorber designs. Retraction, kinematics, and mechanisms are studied as well as possible actuation approaches. Detailed information on the various hydraulic and electric services commonly found on aircraft, and system elements such as dressings, lighting, and steering are also reviewed. Detail design points, the process of analysis, and a review of the relevant requirements and regulations round out the book content. The Design of Aircraft Landing Gear is a landmark work in the industry, and a must-read for any engineer interested in updating specific skills and students preparing for an exciting career.

Download or read book The Structure of Turbulent Shear Flow written by A. A. R. Townsend and published by Cambridge University Press. This book was released on 1976 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops a physical theory from the mass of experimental results, with revisions to reflect advances of recent years.

Download or read book Flow Control written by Mohamed Gad-el-Hak and published by Cambridge University Press. This book was released on 2000-08-15 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough treatment of the basics of flow control and flow control practices.

Download or read book Crude Oil Fouling written by Francesco Coletti and published by Gulf Professional Publishing. This book was released on 2014-11-20 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: With production from unconventional rigs continuing to escalate and refineries grappling with the challenges of shale and heavier oil feedstocks, petroleum engineers and refinery managers must ensure that equipment used with today's crude oil is protected from fouling deposits Crude Oil Fouling addresses this overarching challenge for the petroleum community with clear explanations on what causes fouling, current models and new approaches to evaluate and study the formation of deposits, and how today's models could be applied from lab experiment to onsite field usability for not just the refinery, but for the rig, platform, or pipeline. Crude Oil Fouling is a must-have reference for every petroleum engineer's library that gives the basic framework needed to analyze, model, and integrate the best fouling strategies and operations for crude oil systems. - Defines the most critical variables and events that cause fouling - Explains the consequences of fouling and its impact on operations, safety, and economics - Provides the technical models available to better predict and eliminate the potential for fouling in any crude system

Download or read book Compressibility Turbulence and High Speed Flow written by Thomas B. Gatski and published by Academic Press. This book was released on 2013-03-05 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compressibility, Turbulence and High Speed Flow introduces the reader to the field of compressible turbulence and compressible turbulent flows across a broad speed range, through a unique complimentary treatment of both the theoretical foundations and the measurement and analysis tools currently used. The book provides the reader with the necessary background and current trends in the theoretical and experimental aspects of compressible turbulent flows and compressible turbulence. Detailed derivations of the pertinent equations describing the motion of such turbulent flows is provided and an extensive discussion of the various approaches used in predicting both free shear and wall bounded flows is presented. Experimental measurement techniques common to the compressible flow regime are introduced with particular emphasis on the unique challenges presented by high speed flows. Both experimental and numerical simulation work is supplied throughout to provide the reader with an overall perspective of current trends. - An introduction to current techniques in compressible turbulent flow analysis - An approach that enables engineers to identify and solve complex compressible flow challenges - Prediction methodologies, including the Reynolds-averaged Navier Stokes (RANS) method, scale filtered methods and direct numerical simulation (DNS) - Current strategies focusing on compressible flow control