Download or read book Structure property Relationships of Oxide Surfaces and Interfaces written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure property Relationships of Oxide Surfaces and Interfaces written by and published by . This book was released on 2003 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Property Relationships of Oxide Surfaces and Interfaces written by C. Barry Carter and published by Cambridge University Press. This book was released on 2001-09-07 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer modeling has reached a new level of sophistication, where it can be used to predict the structure and energy of interfaces in oxides. Nowhere is this activity more important than in these ceramic materials, where more applications are being discovered but the fundamental properties are often poorly known or not known at all. As more multicomponent oxides are exploited for their novel properties, both the experimentalist and the modeler will be challenged to predict or explain the behavior of these materials under a wide range of conditions. This book focuses on the interfaces of oxide-based materials. The areas of composite materials, materials synthesis, microscopy, defect chemistry and structure, nanomaterials technologies, thin-film synthesis and characterization, computer modeling, structural characterization and properties measurement of surfaces and internal interfaces are featured together with advances in computer modeling of oxide interfaces. A series on structural characterization of surfaces and interfaces utilizing advanced microscopic techniques is also provided, as is a series on the measurement of properties of real interfaces (diffusion, mechanical, electrical and magnetic).
Download or read book Structure Property Relationships of Oxide Surfaces and Interfaces II Volume 751 written by Materials Research Society. Meeting and published by . This book was released on 2003-05-21 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because surfaces and interfaces found in oxide systems are strikingly complex, they can only be fully understood when examined at an atomic level. Yet for the materials scientist, such understanding is of paramount importance since future technological advances require it. This book, the second in a new series from the Materials Research Society, addresses structure-property relationships in these systems. Compared to the first proceedings, here we see a shift towards less well-defined materials that often more closely resemble reality, and an increasing effort to study these phenomena using in situ techniques. Of particular interest are discussions on the dynamical evolution of surface structure and relationships between the structure of surfaces, their stoichiometry and the distribution of bulk dislocations, which in turn can control the growth and retraction of islands and pits. Modeling and characterization of thin intergranular films, with a focus on how these films influence the properties of so many ceramic materials, are also addressed.
Download or read book Structure Property Relationships of Oxide Surfaces and Interfaces written by C. Barry Carter and published by Cambridge University Press. This book was released on 2014-06-05 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer modeling has reached a new level of sophistication, where it can be used to predict the structure and energy of interfaces in oxides. Nowhere is this activity more important than in these ceramic materials, where more applications are being discovered but the fundamental properties are often poorly known or not known at all. As more multicomponent oxides are exploited for their novel properties, both the experimentalist and the modeler will be challenged to predict or explain the behavior of these materials under a wide range of conditions. This book focuses on the interfaces of oxide-based materials. The areas of composite materials, materials synthesis, microscopy, defect chemistry and structure, nanomaterials technologies, thin-film synthesis and characterization, computer modeling, structural characterization and properties measurement of surfaces and internal interfaces are featured together with advances in computer modeling of oxide interfaces. A series on structural characterization of surfaces and interfaces utilizing advanced microscopic techniques is also provided, as is a series on the measurement of properties of real interfaces (diffusion, mechanical, electrical and magnetic).
Download or read book Surface and Interface Science Volumes 5 and 6 written by Klaus Wandelt and published by John Wiley & Sons. This book was released on 2016-03-14 with total page 1532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In eight volumes, Surface and Interface Science covers all fundamental aspects and offers a comprehensive overview of this research area for scientists working in the field, as well as an introduction for newcomers. Volume 5: Solid-Gas Interfaces I Topics covered: Basics of Adsorption and Desorption Surface Microcalorimetry Adsorption of Rare Gases Adsorption of Alkali and Other Electro-Positive Metals Halogen adsorption on metals Adsorption of Hydrogen Adsorption of Water Adsorption of (Small) Molecules on Metal Surfaces Surface Science Approach to Catalysis Adsorption, Bonding and Reactivity of Unsaturated and Multifunctional Molecules Volume 6: Solid-Gas Interfaces II Topics covered: Adsorption of Large Organic Molecules Chirality of Adsorbates Adsorption on Semiconductor Surfaces Adsorption on Oxide Surfaces Oscillatory Surface Reactions Statistical Surface Thermodynamics Theory of the Dynamics at Surfaces Atomic and Molecular Manipulation
Download or read book Structure Property Relationships in Surface Modified Ceramics written by C.J. McHargue and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of ion beams for the modification of the structure and properties of the near-surface region of ceramics began in earnest in the early 19805. Since the mechanical properties of such materials are dominated by surface flaws and the surface stress state, the use of surface modification tech niques would appear to be an obvious application. As is often the case in research and development, most of the initial studies can be characterized as cataloging the response of various ceramic materials to a range of ion beam treatments. The systematic study of material and ion beam parameters is well underway and we are now designing experiments to provide specific information about the processing parameter - structure-property rela tionships. This NATO-Advanced Study Institute was convened in order to assess our current state of knowledge in this field, to identify opportunities and needs for further research, and to identify the potential of such processes for technological application. It became apparent that this class of inorganic compounds, loosely termed ceramics, presents many challenges to the understanding of ion-solid inter actions, the relationships among ion-beam parameters, materials parameters, and the resulting structures, as well as relationships between structure and properties. In many instances, this understanding will represent a major extension of that learned from the study of metals and semiconductors.
Download or read book Structure Processing Properties Relationships in Stoichiometric and Nonstoichiometric Oxides written by Speranta Tanasescu and published by BoD – Books on Demand. This book was released on 2020-11-04 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interrelation among composition, microstructure, and properties of stoichiometric and nonstoichiometric compounds is a major field of research for both scientific and technological reasons. As such, this book focuses on metal oxides, which present a large diversity of electrical, magnetic, optical, optoelectronic, thermal, electrochemical, and catalytic properties, making them suitable for a wide range of applications. By bringing together scientific contributions with special emphasis on the interrelations between materials chemistry, processing, microstructures, and properties of stoichiometric and nonstoichiometric metal oxides, this book highlights the importance of tightly integrating high-throughput experiments (including both synthesis and characterization) and efficient and robust theory for the design of advanced materials.
Download or read book Structure property Relationships of Nanoscale Engineered Perovskite Oxides written by Wei Tian and published by . This book was released on 2002 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubrication at the Frontier The Role of the Interface and Surface Layers in the Thin Film and Boundary Regime written by M. Priest and published by Elsevier. This book was released on 1999-07-01 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 25th Leeds-Lyon Symposium on Tribology was held at the Institut des Sciences Appliquées de Lyon, from 8-11th September, 1998. Its central theme was, "Lubrication at the frontier: the role of the interface and surface layers in the thin film and boundary regime". This topic was chosen because it represents an important evolution of the research field.The Symposium opened with a keynote address entitled "Role of surface-anchored polymer chains in polymer friction" which described the processes taking place at the interface between "solid" and "liquid". The keynote address was followed by two invited lectures. Firstly, "Fuel efficient engine oils, additive interactions, boundary friction and wear" presented the industrial point of view on lubricant formulation and engine testing and its evolution. The second lecture was entitled "For establishment of a new EHL theory" and stressed the need to extend the current EHL theory.Beginning in 1974, The Leeds-Lyon Symposia have now covered a wide range of topics. The essential aim each year is to select a topic of current interest to tribologists and to contribute to further the advance of knowledge in selected fields.
Download or read book Guide to Programs written by National Science Foundation (U.S.) and published by . This book was released on 1992 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloid and Interface Science in Pharmaceutical Research and Development written by Hiroyuki Ohshima and published by Elsevier. This book was released on 2014-07-23 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid and Interface Science in Pharmaceutical Research and Development describes the role of colloid and surface chemistry in the pharmaceutical sciences. It gives a detailed account of colloid theory, and explains physicochemical properties of the colloidal-pharmaceutical systems, and the methods for their measurement. The book starts with fundamentals in Part I, covering fundamental aspects of colloid and interface sciences as applied to pharmaceutical sciences and thus should be suitable for teaching. Parts II and III treat applications and measurements, and they explains the application of these properties and their influence and use for the development of new drugs. Provides a clear description of the fundamentals of colloid and interface science relevant to drug research and development Explains the physicochemical/colloidal basis of pharmaceutical science Lists modern experimental characterization techniques, provides analytical equations and explanations on analyzing the experimental data Describes the most advanced techniques, AFM (Atomic Force Microscopy), SFA (Surface Force Apparatus) in detail
Download or read book Springer Handbook of Marine Biotechnology written by Se-Kwon Kim and published by Springer. This book was released on 2015-01-21 with total page 1517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook provides, for the first time, a complete and consistent overview over the methods, applications, and products in the field of marine biotechnology. A large portion of the surface of the earth (ca. 70%) is covered by the oceans. More than 80% of the living organisms on the earth are found in aquatic ecosystems. The aquatic systems thus constitute a rich reservoir for various chemical materials and (bio-)chemical processes. Edited by a renowned expert with a longstanding experience, and including over 60 contributions from leading international scientists, the Springer Handbook of Marine Biotechnology is a major authoritative desk reference for everyone interested or working in the field of marine biotechnology and bioprocessing - from undergraduate and graduate students, over scientists and teachers, to professionals. Marine biotechnology is concerned with the study of biochemical materials and processes from marine sources, that play a vital role in the isolation of novel drugs, and to bring them to industrial and pharmaceutical development. Today, a multitude of bioprocess techniques is employed to isolate and produce marine natural compounds, novel biomaterials, or proteins and enzymes from marine organisms, and to bring them to applications as pharmaceuticals, cosmeceuticals or nutraceuticals, or for the production of bioenergy from marine sources. All these topics are addressed by the Springer Handbook of Marine Biotechnology. The book is divided into ten parts. Each part is consistently organized, so that the handbook provides a sound introduction to marine biotechnology - from historical backgrounds and the fundamentals, over the description of the methods and technology, to their applications - but it can also be used as a reference work. Key topics include: - Marine flora and fauna - Tools and methods in marine biotechnology - Marine genomics - Marine microbiology - Bioenergy and biofuels - Marine bioproducts in industrial applications - Marine bioproducts in medical and pharmaceutical applications - and many more...
Download or read book Handbook of Self Cleaning Surfaces and Materials written by Akira Fujishima and published by John Wiley & Sons. This book was released on 2023-05-03 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Self-Cleaning Surfaces and Materials The first truly comprehensive work on this rapidly developing field in two volumes Self-cleaning surfaces are those that can be cleaned, for instance, by sun or rainwater, without human intervention. They are sometimes found in nature but developing man-made equivalents has been a major area of nanotechnology research in recent years. Self-cleaning tiles, glasses, paints, and textiles have been developed to date, and the number of applications for this technology is growing. Handbook of Self-Cleaning Surfaces and Materials provides a comprehensive overview of this field of study. It includes two volumes, with the first presenting the basic principles of the field and the second supplying specific examples and applications. It is a one-stop shop for anyone looking to familiarize themselves with this area of technological research, as well as for existing professionals who want a handy and thorough reference. Readers of the Handbook of Self-Cleaning Surfaces and Materials will also find: An editor and contributor team with decades of experience in both academic and industrial research Detailed treatment of subjects including TiO2 photocatalysis, hydrophobic self-cleaning surfaces, and more Figures throughout illustrating important concepts and chemical formulas Handbook of Self-Cleaning Surfaces and Materials is an essential resource for researchers and industry professionals in chemistry, surface physics, and materials science.
Download or read book Nanocrystalline Materials written by Sie-Chin Tjong and published by Newnes. This book was released on 2013-09-02 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Nanocrystalline Materials provides updated information on the development and experimental work on the synthesis, properties, and applications of nanocrystalline materials. Nanocrystalline materials with new functionalities show great promise for use in industrial applications — such as reinforcing fillers in novel polymer composites — and substantial progress has been made in the past decade in their synthesis and processing. This book focuses primarily on 1D semiconducting oxides and carbon nanotubes, 2D graphene sheets and 0D nanoparticles (metals and inorganic semiconductors). These materials are synthesized under different compositions, shapes and structures, exhibiting different chemical, physical and mechanical properties from their bulk counterparts. This second edition presents new topics relevant to the fast-paced development of nanoscience and nanotechnology, including the synthesis and application of nanomaterials for drug delivery, energy, printed flash memory, and luminescent materials. With contributions from leading experts, this book describes the fundamental theories and concepts that illustrate the complexity of developing novel nanocrystalline materials, and reviews current knowledge in the synthesis, microstructural characterization, physical and mechanical behavior, and application of nanomaterials. Investigates the synthesis, characterization, and properties of a large variety of nanocrystalline materials, and their applications in industry Keeps the prominent challenges in nanomaterials fabrication at the forefront while offering the most up-to-date scientific findings Written by experts in nanomaterials with academic backgrounds in chemistry, physics, and materials engineering
Download or read book Springer Handbook of Surface Science written by Mario Rocca and published by Springer Nature. This book was released on 2021-01-14 with total page 1273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook delivers an up-to-date, comprehensive and authoritative coverage of the broad field of surface science, encompassing a range of important materials such metals, semiconductors, insulators, ultrathin films and supported nanoobjects. Over 100 experts from all branches of experiment and theory review in 39 chapters all major aspects of solid-state surfaces, from basic principles to applications, including the latest, ground-breaking research results. Beginning with the fundamental background of kinetics and thermodynamics at surfaces, the handbook leads the reader through the basics of crystallographic structures and electronic properties, to the advanced topics at the forefront of current research. These include but are not limited to novel applications in nanoelectronics, nanomechanical devices, plasmonics, carbon films, catalysis, and biology. The handbook is an ideal reference guide and instructional aid for a wide range of physicists, chemists, materials scientists and engineers active throughout academic and industrial research.
Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.
