Download or read book Polymer Data Handbook written by James E. Mark and published by Oxford University Press, USA. This book was released on 2009 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition includes better values of properties already reported, properties not reported in time for the earlier edition, and entirely new properties becoming important for modern polymer applications. It also contains 217 total polymers, 20 of which are all-new, particularly in high-technology areas such as eletrical conductivity, non-linear optical properties, microlithography, nanophotonics, and electroluminescences. Examples of specific polymers include silsesquoxane ladder polymers, 'foldamer' self-assembling polymers, and block copolymers that phase separate into 'mushrooms', ellipsoids, and sheets with on surface radically different in properties from the other.

Download or read book Poly Ethylene Glycol Chemistry written by J. Milton Harris and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book came from discussions among participants in a symposium on biotechnical applications at the "Pacifichem 89" meeting in Honolulu. It was the majority opinion of this group that a volume dedicated to biotechnical and biomedical applications of PEG chemistry would enhance research and development in this area. Though the book was conceived at the Honolulu meeting, it is not a proceedings of this symposium. Several groups who did not participate in this meeting are repre sented in the book, and the book incorporates much work done after the meeting. The book does not include contributions in all related areas to which PEG chemistry has been applied. Several invited researchers declined to parti.:ipate, and there is not enough space in this single volume to properly cover all submissions. Chapter I-an overview of the topic-discusses in brief applications not given detailed coverage in specifically devoted chapters. The following topics are covered: introduction to and fundamental properties of PEG and derivatives in Chapters 1-3; separations using aqueous polymer two-phase partitioning in Chapters 4-6; PEG-proteins as catalysts in biotechnical applications in Chapters 7 and 8; biomedical applications of PEG-proteins in Chapters 9-13; PEG modified surfaces for a variety of biomedical and biotechnical applications in Chapters 14-20; and synthesis of new PEG derivatives in Chapters 21 and 22.

Download or read book Additives for Plastics Handbook written by J. Murphy and published by Elsevier. This book was released on 2001-11-22 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.

Download or read book Coatings Materials and Surface Coatings written by Arthur A. Tracton and published by CRC Press. This book was released on 2006-11-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing from the third edition of The Coatings Technology Handbook, this text provides a detailed analysis of the raw materials used in the coatings, adhesives, paints, and inks industries. Coatings Materials and Surface Coatings contains chapters covering the latest polymers, carbon resins, and high-temperature materials used for coatings, adhesives, and varnishes today. Featuring new and updated chapters, this text provides an in-depth examination of raw materials categorized into four types: resins, solvents, pigments, and additives. Concise chapters describe the development, chemical and physical properties, synthesis and polymerization, commercial uses, and other characteristics for each raw material and coating. In addition, the book demonstrates how application methods, environmental factors, and chemical interactions affect each surface coating's performance. Other unique topics include biocides, fluorocarbon resins, vegetable- and protein-based coatings and adhesives, gravure inks, and artists' paints. A comprehensive, yet practical source of reference, Coatings Materials and Surface Coatings provides an excellent foundation for comparing the properties and performance of coatings and choosing suitable materials based on specific service needs and environmental factors.

Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

Download or read book Polyesters and Polyamides written by B L Deopura and published by Elsevier. This book was released on 2008-06-17 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyesters and polyamides remain the most used group of synthetic fibres. This authoritative book reviews methods of their production, ways of improving their functionality and their wide range of applications.The first part of the book describes raw materials and manufacturing processes, including environmental issues. Part two considers ways of improving the functionality of polyester and polyamide fibres, including blending, weaving, coloration and other finishing techniques as well as new techniques such as nanotechnology. The final part of the book reviews the range of uses of these important fibres, from apparel and sportswear to automotive, medical and civil engineering applications.With its distinguished editors and international team of contributors, Polyesters and polyamides is a standard reference for all those using this important group of fibres. - Reviews the chemical and physical properties of each fibre and their manufacture - Analyses how the functionality of polyester and polyamides can be improved - Provides examples of how the fibres are used in applications

Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over

Download or read book Industrial Organic Chemicals written by H. A. Wittcoff and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book broadly describes the polymer industry and industrial catalysts, essential topics for understanding the chemical industry. In addition, it covers the largest commodity-organic chemicals made. These chemicals account for billions of dollars in revenue per year in the U.S. alone.

Download or read book Surface Coatings written by Swaraj Paul and published by John Wiley & Sons. This book was released on 1996-05 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Coatings Second Edition Swaraj Paul PP Polymer AB, Sp?nga, Sweden This is a fully revised and up-dated edition of the popular book 'Surface Coatings' first published in 1985. The book provides a comprehensive overview of all aspects of coating technology including composition, preparation and application, and the parameters controlling their ultimate performance. Techniques in their infancy at the time of the first edition, such as the synthesis of industrial resins, have now been developed and their applications are discussed here in detail. The basic principles of paint formulation have been revised and an extra section has been added on new technologies. The new sections have been written by experts working in the industry which gives the book a new dimension; covering both theoretical and practical aspects of the state-of-the-art. The editor has extensive experience in the surface coating field and runs his own research and development company specializing in the chemistry of surface coatings, adhesives and polymeric materials.

Download or read book Underground Corrosion written by Edward Escalante and published by ASTM International. This book was released on 1981-06 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stabilization of Polymeric Materials written by Hans Zweifel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics are used worldwide in everyday life, e.g. as food packaging, electronics, construction, automotive parts, and household appliances. To produce these products with the desired service lifetimes the use of suitable stabilizers is necessary. This book provides a concise and comprehensive overview of the basic mechanisms of plastic degradation processes caused by heat and light. At its core is a detailed description of the stabilization of different polymers, including an explanation of stabilization mechanisms and the influence of commonly used additives such as fillers, flame retardents and pigments on the stability of plastic. Every polymer scientist, material technologist, or application engineer dealing with the design of the properties of plastics will benefit from this new overview.

Download or read book Technology in Forensic Science written by Deepak Rawtani and published by John Wiley & Sons. This book was released on 2020-11-02 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "Technology in Forensic Science" provides an integrated approach by reviewing the usage of modern forensic tools as well as the methods for interpretation of the results. Starting with best practices on sample taking, the book then reviews analytical methods such as high-resolution microscopy and chromatography, biometric approaches, and advanced sensor technology as well as emerging technologies such as nanotechnology and taggant technology. It concludes with an outlook to emerging methods such as AI-based approaches to forensic investigations.

Download or read book Alphaherpesviruses written by Sandra Knowles Weller and published by Caister Academic Press Limited. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alphaherpesviruses are a fascinating group of DNA viruses that includes important human pathogens such as herpes simplex virus type 1 (HSV-1), HSV-2, and varicella-zoster virus (VZV): the causative agents of cold sores, genital ulcerous disease, and chickenpox/shingles, respectively. A key attribute of these viruses is their ability to establish lifelong latent infection in the peripheral nervous system of the host. Such persistence requires subversion of the host's immune system and intrinsic antiviral defense mechanisms. Understanding the mechanisms of the immune evasion and what triggers viral reactivation is a major challenge for today's researchers. This has prompted enormous research efforts into understanding the molecular and cellular biology of these viruses. This up-to-date and comprehensive volume aims to distill the most important research in this area providing a timely overview of the field. Topics covered include: transcriptional regulation, DNA replication, translational control, virus entry and capsid assembly, the role of microRNAs in infection and oncolytic vectors for cancer therapy. In addition there is coverage of virus-host interactions, including apoptosis, subversion of host protein quality control and DNA damage response pathways, autophagy, establishment and reactivation from latency, interferon responses, immunity and vaccine development. Essential reading for everyone working with alphaherpesviruses and of interest to all virologists working on latent infections.

Download or read book Ionizing Radiation and Polymers written by Jiri George Drobny and published by William Andrew. This book was released on 2012-12-31 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation processing is widely employed in plastics engineering to enhance the physical properties of polymers, such as chemical resistance, surface properties, mechanical and thermal properties, particle size reduction, melt properties, material compatibility, fire retardation, etc. Drobny introduces readers to the science of ionizing radiation and its effects on polymers, and explores the technologies available and their current and emerging applications. The resulting book is a valuable guide for a wide range of plastics engineers employing ionizing radiation for polymer treatment in a range of sectors including packaging, aerospace, defense, medical devices and energy applications. Radiation resistant polymers are also explored. Unlock the potential of ionizing radiation in applications such as electron-beam curing and laser joining Gain an understanding of the selection and safe use of radiation treatment equipment The only detailed guide to ionizing radiation written for the plastics engineering community

Download or read book Oxidation Inhibition in Organic Materials written by Jan Pospisil and published by CRC Press. This book was released on 1989-12-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume publication provides an overview of processes developed to inhibit oxidative deterioration of organic materials. It discusses aspects of auto-oxidation, photo-oxidation and combustion, the major mechanisms involved, oxidation inhibitors classes, and practices in oxidation inhibition. The books include physical phenomena in polymer oxidation, and thermoanalytical methods for studying oxidation inhibition. Covered are analytical methods for inhibitors in organic materials, and scientific and technical prospects in the stabilization of organic materials. This comprehensive title is useful for investigators and students at all levels who have interest in polymer sciences.

Download or read book Developments in Thermoplastic Elastomers written by K. E. Kear and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic elastomers (TPEs) have the elastic behaviour of rubber and the processability of thermoplastics. The Freedonia Group has forecast that demand will expand by 6.4% per year to around 2.15 million tons in 2006. There is potential for these new, exciting materials to expand into the much larger thermoset rubber markets. This review includes comparisons between the two material types. There are three major types of TPE: block copolymers, rubber/plastic blends and dynamically vulcanised rubber/plastic alloys known as thermoplastic vulcanisates. The chemistry of these materials and how.

Download or read book Biocidal Polymers written by Narendra Pal Singh Chauhan and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-10-21 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocidal polymers are designed to inhibit or kill microorganisms such as bacteria, fungi and protozoans. This book summarizes recent findings in the synthesis, modification and characterization of various antimicrobial polymers ranging from plastics and elastomers to biomimetic and biodegradable polymers. Modifications with different antimicrobial agents as well as antimicrobial testing methods are described in a comprehensive manner.