Download or read book Structure evolution in tribological interfaces studied by multilayer model alloys written by Cihan, Ebru and published by KIT Scientific Publishing. This book was released on 2020-10-21 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies of deformation mechanisms of metals and alloys pioneer the better investigation of the friction and wear behavior of materials with well-defined initial microstructures. Within this scope, in this work, the effect of sub-surface deformations on the resulting friction and wear behavior has been searched by means of a systematic experimental study on Au-Ni metallic multilayer model alloy system.
Download or read book Multiscale Modeling of Curing and Crack Propagation in Fiber Reinforced Thermosets written by Schöller, Lukas and published by KIT Scientific Publishing. This book was released on 2024-03-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the production of fiber-reinforced thermosets, the resin material undergoes a reaction that can lead to damage. A two-stage polymerization reaction is modeled using molecular dynamics and evaluations of the system including a fiber surface are performed. In addition, a phase-field model for crack propagation in heterogeneous systems is derived. This model is able to predict crack growth where established models fail. Finally, the model is used to predict crack formation during curing.
Download or read book Dynamic Model based Analysis of Oxygen Reduction Reaction in Gas Diffusion Electrodes written by Röhe, Maximilian and published by KIT Scientific Publishing. This book was released on 2024-01-09 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, the first simulation model of oxygen depolarized cathodes (ODC), which are silver catalyst-based gas diffusion electrodes, is presented that considers the phase equilibrium of the gas-liquid interface and structure-related inhomogeneities in electrolyte distribution. By means of the model it has been identified that mass transport of water and ions in the liquid phase is a crucial factor for electrode performance and how it is influenced by the electrode structure.
Download or read book Modeling transport properties and electrochemical performance of hierarchically structured lithium ion battery cathodes using resistor networks and mathematical half cell models written by Birkholz, Oleg and published by KIT Scientific Publishing. This book was released on 2022-10-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hierarchically structured active materials in electrodes of lithium-ion cells are promising candidates for increasing gravimetric energy density and improving rate capability of the system. To investigate the influence of cathode structures on the performance of the whole cell, efficient tools for calculating effective transport properties of granular systems are developed and their influence on the electrochemical performance is investigated in specially adapted cell models.
Download or read book Phase field Modeling of Phase Changes and Mechanical Stresses in Electrode Particles of Secondary Batteries written by Zhang, Tao and published by KIT Scientific Publishing. This book was released on 2021-09-27 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most storage materials exhibit phase changes, which cause stresses and, thus, lead to damage of the electrode particles. In this work, a phase-field model for the cathode material NaxFePO4 of Na-ion batteries is studied to understand phase changes and stress evolution. Furthermore, we study the particle size and SOC dependent miscibility gap of the nanoscale insertion materials. Finally, we introduce the nonlocal species concentration theory, and show how the nonlocality influences the results.
Download or read book Application of Data Mining and Machine Learning Methods to Industrial Heat Treatment Processes for Hardness Prediction written by Lingelbach, Yannick and published by KIT Scientific Publishing. This book was released on 2024-07-24 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a data mining framework applied to industrial heattreatment (bainitization and case hardening) aiming to optimize processes and reduce costs. The framework analyses factors such as material, production line, and quality assessment for preprocessing, feature extraction, and drift corrections. Machine learning is employed to devise robust prediction strategies for hardness. Its implementation in an industry pilot demonstrates the economic benefits of the framework. - This work presents a data mining framework applied to industrial heattreatment (bainitization and case hardening) aiming to optimize processes and reduce costs. The framework analyses factors such as material, production line, and quality assessment for preprocessing, feature extraction, and drift corrections. Machine learning is employed to devise robust prediction strategies for hardness. Its implementation in an industry pilot demonstrates the economic benefits of the framework.
Download or read book On the Electro Chemo Mechanical Coupling in Solid State Batteries and its Impact on Morphological Interface Stability written by Ganser, Markus and published by KIT Scientific Publishing. This book was released on 2021-03-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state batteries with a lithium metal electrode are considered the next generation of high energy battery technology. Unfortunately, lithium metal is prone to harmful protrusion or dendrite growth which causes dangerous cell failure. Within this work the problem of protrusion growth is tackled by deriving a novel electro-chemo-mechanical theory tailored for binary solid state batteries which is then used to discuss the impact of mechanics on interface stability by numerical studies.
Download or read book Consequences of hydroxyl generation by the silica water reaction Part II Global and local Swelling Part III Damage and Young s Modulus written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effects on diffusion behaviour and mechanical properties. In a preceding booklet, we focused on diffusion and fiber strengths and deformations which were obtained by water soaking under external loading. In the present booklet we deal with results and interpretations of strength increase in the absence of applied stresses.
Download or read book Consequences of hydroxyl generation by the silica water reaction Part I Diffusion and Swelling written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effectson diffusion behaviour and mechanical properties. Water added to silica glass increases its specific volume so that the silica expands near the surface. Mechanical boundary conditions give rise for compressive “swelling stresses”. This fact provides a tool for the interpretation of many experimental observations from literature.
Download or read book Development of NbN based Kinetic Inductance Detectors on sapphire and diamond substrates for fusion plasma polarimetric diagnostics written by Mazzocchi, Francesco and published by KIT Scientific Publishing. This book was released on 2022-07-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work aimed at designing, studying and producing the first prototypes of KIDs tailored for fusion plasma polarimetric diagnostics. Diamond was considered for the first time as substrate material for low-temperature superconducting detectors given its unmatched optical, radiation hardness and thermal qualities, properties necessary for working environments potentially saturated with radiation. This work represents a first step toward the optimization and final application of this technology.
Download or read book Carbon Nanomaterials Modeling Design and Applications written by Kun Zhou and published by CRC Press. This book was released on 2019-07-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanomaterials: Modeling, Design, and Applications provides an in-depth review and analysis of the most popular carbon nanomaterials, including fullerenes, carbon nanotubes, graphene and novel carbon nanomaterial-based membranes and thin films, with emphasis on their modeling, design and applications. This book provides basic knowledge of the structures, properties and applications of carbon-based nanomaterials. It illustrates the fundamental structure-property relationships of the materials in both experimental and modeling aspects, offers technical guidance in computational simulation of nanomaterials, and delivers an extensive view on current achievements in research and practice, while presenting new possibilities in the design and usage of carbon nanomaterials. This book is aimed at both undergraduate and graduate students, researchers, designers, professors, and professionals within the fields of materials science and engineering, mechanical engineering, applied physics, and chemical engineering.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protective Thin Coatings Technology written by Sam Zhang and published by CRC Press. This book was released on 2021-08-08 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard or protective coatings are widely used in conventional and modern industries and will continue to play a key role in future manufacturing, especially in the micro and nano areas. Protective Thin Coatings Technology highlights the developments and advances in the preparation, characterization, and applications of protective micro-/nanoscaled films and coatings. This book Covers technologies for sputtering of flexible hard nanocoatings, deposition of solid lubricating films, and multilayer transition metal nitrides Describes integrated nanomechanical characterization of hard coatings, corrosion and tribo-corrosion of hard coatings, and high entropy alloy films and coatings Investigates thin films and coatings for high-temperature applications, nanocomposite coatings on magnesium alloys, and the correlation between coating properties and industrial applications Features various aspects of hard coatings, covering advanced sputtering technologies, structural characterizations, and simulations, as well as applications This first volume in the two-volume set, Protective Thin Coatings and Functional Thin Films Technology, will benefit industry professionals and researchers working in areas related to semiconductors, optoelectronics, plasma technology, solid-state energy storages, and 5G, as well as advanced students studying electrical, mechanical, chemical, and material engineering.
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Development of Nanostructured Thin Films written by Antonella Macagnano and published by MDPI. This book was released on 2020-05-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their unique size-dependent physicochemical properties, nanostructured thin films are used in a wide range of applications from smart coating and drug delivery to electrocatalysis and highly-sensitive sensors. Depending on the targeted application and the deposition technique, these materials have been designed and developed by tuning their atomic-molecular 2D- and/or 3D-aggregation, thickness, crystallinity, and porosity, having effects on their optical, mechanical, catalytic, and conductive properties. Several open questions remain about the impact of nanomaterial production and use on environment and health. Many efforts are currently being made not only to prevent nanotechnologies and nanomaterials from contributing to environmental pollution but also to design nanomaterials to support, control, and protect the environment. This Special Issue aims to cover the recent advances in designing nanostructured films focusing on environmental issues related to their fabrication processes (e.g., low power and low cost technologies, the use of environmentally friendly solvents), their precursors (e.g., waste-recycled, bio-based, biodegradable, and natural materials), their applications (e.g., controlled release of chemicals, mimicking of natural processes, and clean energy conversion and storage), and their use in monitoring environment pollution (e.g., sensors optically- or electrically-sensitive to pollutants)
Download or read book 4M 2005 First International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2005-12-07 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2005 - First International Conference on Multi-Material Micro Manufacture
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
