Download or read book Structure borne Sound Sources in Buildings written by Matthias Lievens and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure borne Sound Sources in Buildings written by Matthias Lievens and published by Logos Verlag Berlin GmbH. This book was released on 2013 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure-borne sound sources are vibrational sources connected in some way to the building structure. The mechanical excitation of the building structure leads to sound radiation. This is an important source of annoyance in modern light-weight buildings. The prediction of the sound pressure level from structure-borne sound sources is highly complicated because of the complexity involved in the coupling between source and receiver structure. The current standard on characterisation of service equipment in buildings EN 12354-5, can deal with sources on heavy structures (high-mobility source) but to date, there is no engineering method available for the case of coupling between source and receiver. A case study of a washing machine on a wooden joist floor is investigated in this thesis. In the first part, measurements in the coupled state are conducted. It is shown that the normal components are sufficient to predict the sound pressure level. However, this only applies to the coupled state. In the second part, a true prediction is calculated from independently measured source and receiver quantities. The difference between predicted and directly measured sound pressure level leads to considerable errors of up to 20 dB at low frequencies. This shows that the normal components are not sufficient to predict the coupling between a washing machine and a wooden floor.
Download or read book Characterisation of Structure borne Sound Sources in Buildings written by Moritz Michael Späh and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Borne Sound written by L. Cremer and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure-Borne Sound" is a thorough introduction to structural vibrations with emphasis on audio frequencies and the associated radiation of sound. The book presents in-depth discussions of fundamental principles and basic problems, in order to enable the reader to understand and solve his own problems. It includes chapters dealing with measurement and generation of vibrations and sound, various types of structural wave motion, structural damping and its effects, impedances and vibration responses of the important types of structures, as well as with attenuation of vibrations, and sound radiation from structures. For the third edition, the author fundamentally revised and newly organized the contents of the work. Nevertheless, the intention has been to preserve the style of the previous editions, namely to focus on the fundamentals enabling the reader to analyse further problems.
Download or read book Single Rig Two stage Method for Characterizing Structure borne Sound Sources in Buildings written by Barry Marshall Gibbs and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure borne Sound Sources in Timber Buildings Prediction of Machinery Noise Using Measured Transmission Functions written by Fabian Schöpfer and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Borne Sound written by L. Cremer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since structure-borne sound plays an important role in noise control, material testing and machine diagnosis, the relevant properties of the most important elements of a construction (plates, beams and shells) are investigated. Measurement techniques, equations of motion, formulas for wave speeds, resonance frequencies, impedances, transmission coefficients etc. are given. The different damping mechanisms and the radiation properties are treated. The statistical energy analysis (SEA) is also presented. This new edition has been enlarged to include also waves on orthotropic plates, and the vibration and radiation of cylindrical shells.
Download or read book A Guide to Airborne Impact and Structure Borne Noise control in Multifamily Dwellings written by Raymond D. Berendt and published by . This book was released on 1967 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simplified Design for Building Sound Control written by James Ambrose and published by John Wiley & Sons. This book was released on 1995-05-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized for self-paced study, this user-friendly book can easily be understood by designers with no engineering training. Provides excellent guidance concerning how design can be used to control noise, privacy and room acoustics within buildings. Contains a summary of the basic types of sound problems that occur in buildings.
Download or read book Vibro Acoustic Sources in Lightweight Buildings written by Andreas Mayr and published by Logos Verlag Berlin GmbH. This book was released on 2010 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work reported in this thesis addresses the problem of structure-borne sound transmission in buildings. Vibrating sources, such as services plant and domestic appliances, transmit vibro-acoustic power, causing noise complaints by occupants in rooms removed from the source room. There is not yet an accepted practical method of predicting the installed power into floors or supporting walls, and thence the resultant sound pressure in rooms. This study concentrates on the prediction of the installed power from mechanical installations in lightweight buildings composed of framed and ribbed plates. To identify the characteristics of such receiver elements, a field survey has been undertaken, which involved measurement of the point and transfer mobilities of common wall and floor structures. It is shown that the range of measured values of receiver point mobility is surprisingly small and that the constructions investigated often displayed thin plate-like characteristics, with relatively small spatial variations in point mobility. These field measurements give support to the notion of averaging over contacts. This single equivalent receiver mobility has been assembled both from measured data and from the approximate method and then used in combination with single equivalent source data, to yield an approximate prediction of the installed power. The agreement obtained between the exact and approximate values allowed consideration of a practical implementation of the approximate prediction method, based on a reception plate method which yields the activity and mobility of the tested machine as single equivalent values.
Download or read book Building Acoustics and Vibration written by Osama A B Hassan and published by World Scientific Publishing Company. This book was released on 2009-06-24 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a comprehensive reference dedicated to sound and vibration in buildings, Building Acoustics and Vibration addresses the basic and advanced principles that can be used to solve practical and theoretical problems typically encountered in building and architectural acoustic practices. In addition, physical and mathematical concepts are introduced and developed sufficiently to make this publication a self-contained and up-to-date source of information for readers. Building Acoustics and Vibration is a must-have textbook for engineering students, engineers, and consultants involved in the sound, vibrations and building environment. With comprehensibility and versatility in the presentation of knowledge, this highly anticipated publication will easily fill the gap in the literature of building engineering and sciences, which presently lacks an authoritative guide on the theoretical and practical aspects of building acoustics and vibration.
Download or read book Noise Buildings and People written by Derek Clements-Croome and published by Pergamon. This book was released on 1977 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Noise Control in Building Services written by A. Fry and published by Elsevier. This book was released on 2013-10-22 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompasses all up-to-date aspects of noise and vibration control in building services in one simple and convenient volume. It provides the necessary background in acoustics and, more importantly, practical advice in the evaluation and control of noise and vibration, with extensive use of tables, illustrations and actual examples. The book's contributors, the senior engineering staff of SRL Ltd, have more than 150 years' collective experience in acoustics, involving design and remedial work on noise and vibration aspects of building services.
Download or read book Acoustics in the Built Environment written by Duncan Templeton and published by Butterworth-Heinemann. This book was released on 1993 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Acoustics in the Built Environment is an invaluable work of reference for the building professional, covering all aspects of acoustics. It is unique in its range of topics: the environment, transport infrastructure, building design, building systems and buildings in use. Each section has been contributed by an expert in the field, and has been written in the light of recent developments such as the Environmental Protection Act and the Health and Safety Executive's Noise at Work Regulations for minimizing hearing damage." "The book presents information relevant to the day-to-day work of project design teams in a concise, readily accessible and usable form. Frequent reference is made to appropriate Standards, Acts of Parliament and other prescriptive documents, which can be cited in performance specifications." "Its broad range of subject matter and its ease of use make Acoustics in the Built Environment an indispensable source of information for anyone concerned with building acoustics, whether they are architects, planners, engineers or environmental health officers."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved
Download or read book Advances on Testing and Experimentation in Civil Engineering written by Carlos Chastre and published by Springer Nature. This book was released on 2023-03-28 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent advances on testing and experimentation in civil engineering, especially in the branches of materials, structures, and buildings, complementing the authors’ publication Advances on Testing and Experimentation in Civil Engineering - Geotechnics, Transportation, Hydraulics and Natural Resources. It includes advances in physical modelling, monitoring techniques, data acquisition and analysis, and provides an invaluable contribution to the installation of new civil engineering experimental facilities. The first part of the book covers the latest advances in the testing and experimentation of key domains of materials, such as bio-cementation and self-healing, durability, and recycled materials, as well as the new environmental requirements related to the presence of hazardous substances in construction materials. Furthermore, laboratory and in situ tests, together with equipment needed to estimate the behaviour and durability of construction materials are presented, updating the most important technological advances. The second part of the book highlights the relevance of testing and monitoring in structures, including in situ tests related to static load tests, dynamic tests, and long-term monitoring strategies, as well as laboratory tests of adhesive joints. Experimental tests on shake tables and blast-resistant structures are also described. Recent applications of drone technologies for the inspection and monitoring of civil structures are another important theme developed. Finally, in its third part, the book presents new developments in the characterisation of building testing, with the support of modelling, to assess building pathology and new requirements, acoustic comfort, fire safety, visual comfort, and energy consumption.
Download or read book Building Electrical Systems and Distribution Networks written by Radian Belu and published by CRC Press. This book was released on 2020-02-13 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all important, new, and conventional aspects of building electrical systems, power distribution, lighting, transformers and rotating electric machines, wiring, and building installations. Solved examples, end-of-chapter questions and problems, case studies, and design considerations are included in each chapter, highlighting the concepts, and diverse and critical features of building and industrial electrical systems, such as electric or thermal load calculations; wiring and wiring devices; conduits and raceways; lighting analysis, calculation, selection, and design; lighting equipment and luminaires; power quality; building monitoring; noise control; building energy envelope; air-conditioning and ventilation; and safety. Two chapters are dedicated to distributed energy generation, building integrated renewable energy systems, microgrids, DC nanogrids, power electronics, energy management, and energy audit methods, topics which are not often included in building energy textbooks. Support materials are included for interested instructors. Readers are encouraged to write their own solutions while solving the problems, and then refer to the solved examples for more complete understanding of the solutions, concepts, and theory.
Download or read book Building Systems for Interior Designers written by Corky Binggeli and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Systems for interior designers Second Edition Corky Binggeli, asid The updated guide to technical building systems for interior designers As integral members of the building design team, interior designers share an increasingly complex and crucial role. Now revised in its second edition, Building Systems for Interior Designers remains the one go-to resource that addresses the special concerns of the interior designer within the broader context of the rest of the building design team. Building Systems for Interior Designers, Second Edition explains technical building systems and engineering issues in a clear and accessible way to interior designers. Covering systems from HVAC to water and waste to lighting, transportation, and safety, author Corky Binggeli enables interior designers to communicate more effectively with architects, engineers, and contractors; collaborate effectively on projects; and contribute to more accurate solutions for a broad range of building considerations. Among the many improvements in the Second Edition are: A deeper engagement with sustainable building design, giving the interior designer the resources needed to participate as part of a sustainable design team A reshaped structure that enhances the reader's understanding of the material Many more illustrations and explanatory captions With a host of features to make the book more up to date, easier to use, and more effective as an instructive guide, Building Systems for Interior Designers, Second Edition is a valuable book for students as well as a practical desktop reference for professionals.