Download or read book Structure and Materials Technologies for Hypersonic Vehicles written by J. F. Jamet and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structures and Materials Technology for Hypersonic Aerospacecraft written by and published by . This book was released on 1990 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic Technology for Military Application written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1990-02-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structures and Materials Assessment for Hypersonic Vehicle Technology written by Robert G. Guyton and published by . This book was released on 1969 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analysis and assessment program was conducted to evaluate the relative merits of candidate radiative thermo-structural configurations for a hypersonic L/D=3 reentry vehicle having a useful payload capacity. The report discusses the effects of vehicle configuration on overall structural design and attempts to assign the refractory metallic alloys to their most efficient range of design utilization expressed in terms of time-temperature-loads environmental inputs. One section of the report is devoted to the conceptual design and integration of variable geometry structure to a high L/D vehicle, with an assessment of the design penalties and problem areas incurred due to the use of variable geometry surfaces. The report identifies the analysis rationale employed in the derivation of the findings and conclusions offered in this report. The study considered the elements of design efficiency, construction techniques and processes, cost-availability considerations, and reliability in the overall investigation of the several candidate thermostructural systems. (Author).
Download or read book Advances in Some Hypersonic Vehicles Technologies written by Ramesh K. Agarwal and published by BoD – Books on Demand. This book was released on 2018-03-14 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the recent progress in some hypersonic technologies such as the aerodynamic modeling and numerical simulations of rarefied flows, boundary layer receptivity, coupled aerodynamics, and heat transfer problems, including fluid-thermal-structure interactions and launcher aerodynamic design as well as other miscellaneous topics, such as porous ceramic composite phase change control system and vehicle profile, following LQR design. Both the researchers and the students should find the material useful in their work.
Download or read book Materials and Structures for Hypersonic Vehicles written by and published by . This book was released on 1988 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Re Entry and Vehicle Design written by Donald P. Legalley and published by Academic Press. This book was released on 2014-05-12 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ballistic Missile and Space Technology, Volume IV: Re-Entry and Vehicle Design focuses on the advancements of processes, methodologies, and technologies involved in re-entry and vehicle design, including hypersonics, material structures, propulsion, and communications. The selection first offers information on the pyrolysis of plastics in a high vacuum arc image furnace and aerothermodynamic feasibility of graphite for hypersonic glide vehicles. Discussions focus on aerothermochemical behavior of graphite, transient heat conduction, equilibrium glide trajectory, and apparatus and pyrolysis procedure. The text then takes a look at an engineering analysis of the weights of ablating systems for manned reentry vehicles and trajectories of lifting bodies entering planetary atmospheres at shallow angles. The manuscript ponders on propulsive control of atmospheric entry lifting trajectories, re-entry engineering mechanics, and rocket casing behavior predicted by laboratory tests. Topics include description of testing program, full-scale casing results, camera design, theoretical correlation, approximate thrust vector optimization, and propellant weight estimation. The selection is a dependable reference for astronauts and researchers interested in re-entry and vehicle design.
Download or read book Scramjet Propulsion written by Dora Musielak and published by John Wiley & Sons. This book was released on 2022-11-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scramjet Propulsion Explore the cutting edge of HAP technologies with this comprehensive resource from an international leader in her field Scramjet Propulsion: A Practical Introduction delivers a comprehensive treatment of hypersonic air breathing propulsion and its applications. The book covers the most up-to-date hypersonic technologies, like endothermic fuels, fuel injection and flameholding systems, high temperature materials, and TPS, and offers technological overviews of hypersonic flight platforms like the X-43A, X-51A, and HiFIRE. It is organized around easy-to-understand explanations of technical challenges and provides extensive references for the information contained within. The highly accomplished author provides readers with a fulsome description of the theoretical underpinnings of hypersonic technologies, as well as critical design and technology issues affecting hypersonic air breathing propulsion technologies. The book’s combination of introductory theory and advanced instruction about individual hypersonic engine components is ideal for students and practitioners in fields as diverse as hypersonic vehicle and propulsion development for missile defense technologies, launch aerospaceplanes, and civilian transports. Over 250 illustrations and tables round out the material. Readers will also learn from: A thorough introduction to hypersonic flight, hypersonic vehicle concepts, and a review of fundamental principles in hypersonic air breathing propulsion Explorations of the aerothermodynamics of scramjet engines and the design of scramjet components, as well as hypersonic air breathing propulsion combustors and fuels Analyses of dual-mode combustion phenomena, materials structures, and thermal management in hypersonic vehicles, and combined cycle propulsion An examination of CFD analysis, ground and flight testing, and simulation Perfect for researchers and graduate students in aerospace engineering, Scramjet Propulsion: A Practical Introduction is also an indispensable addition to the libraries of engineers working on hypersonic vehicle development seeking a state-of-the-art resource in one of the most potentially disruptive areas of aerospace research today.
Download or read book Review and Evaluation of the Air Force Hypersonic Technology Program written by National Research Council and published by National Academies Press. This book was released on 1998-09-05 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study was undertaken in response to a request by the U.S. Air Force that the National Research Council (NRC) examine whether the technologies that underlie the concept of a hypersonic, air-launched, air-breathing, hydrocarbon-fueled missile with speeds up to Mach 81 can be demonstrated in time to be initially operational by 2015. To conduct the study, the NRC appointed the Committee on Review and Evaluation of the Air Force Hypersonic Technology Program, under the auspices of the Air Force Science and Technology Board.
Download or read book Structures Technology written by Ahmed Khairy Noor and published by AIAA. This book was released on 1998 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from early volumes of Aerospace America and its antecedents, this book rescues the insights, concerns, and dreams of dozens of structural engineers for the next generation of aerospace scientists and engineers. Written by eminent individuals in structures, this book provides accessible source material for university-level design courses in aerospace engineering. The first paper in Structures Technology deals with new structures for future aerospace systems and provides a contrast between our current thinking and past technology plans. Succeeding papers are historical reports covering materials and structures, general structures technology, aircraft structures, space structures, and structural dynamics technology. You will also find sections covering structural configurations, thermal protection systems, subsonic aircraft, supersonic and hypersonic vehicles and structures for space systems.
Download or read book Hypersonic Airframe Structures Technology Needs and Flight Test Requirements written by J. E. Stone and published by . This book was released on 1979 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic Vehicles written by Giuseppe Pezzella and published by BoD – Books on Demand. This book was released on 2019-10-02 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the aviation field there is great interest in high-speed vehicle design. Hypersonic vehicles represent the next frontier of passenger transportation to and from space. However, several design issues must be addressed, including vehicle aerodynamics and aerothermodynamics, aeroshape design optimization, aerodynamic heating, boundary layer transition, and so on. This book contains valuable contributions focusing on hypervelocity aircraft design. Topics covered include hypersonic aircraft aerodynamic and aerothermodynamic design, especially aeroshape design optimization, computational fluid dynamics, and scramjet propulsion. The book also discusses high-speed flow issues and the challenges to achieving the dream of affordable hypersonic travel. It is hoped that the information contained herein will allow for the development of safe and efficient hypersonic vehicles.
Download or read book Advances in Some Hypersonic Vehicles Technologies written by Ramesh K. Agarwal and published by . This book was released on 2018 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the recent progress in some hypersonic technologies such as the aerodynamic modeling and numerical simulations of rarefied flows, boundary layer receptivity, coupled aerodynamics, and heat transfer problems, including fluid-thermal-structure interactions and launcher aerodynamic design as well as other miscellaneous topics, such as porous ceramic composite phase change control system and vehicle profile, following LQR design. Both the researchers and the students should find the material useful in their work.
Download or read book Airframe Research and Technology for Hypersonic Airbreathing Vehicles written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-20 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hypersonics Investment Area (HIA) within NASA's Advanced Space Transportation Program (ASTP) has the responsibility to develop hypersonic airbreathing vehicles for access to space. The Airframe Research and Technology (AR and T) Project, as one of six projects in the HIA, will push the state-of-the-art in airframe and vehicle systems for low-cost, reliable, and safe space transportation. The individual technologies within the project are focused on advanced, breakthrough technologies in airframe and vehicle systems and cross-cutting activities that are the basis for improvements in these disciplines. Both low and medium technology readiness level (TRL) activities are being pursued. The key technical areas that will be addressed by the project include analysis and design tools, integrated vehicle health management (IVHM), composite (polymer, metal, and ceramic matrix) materials development, thermal/structural wall concepts, thermal protection systems, seals, leading edges, aerothermodynamics, and airframe/propulsion flowpath technology. Each of the technical areas or sub-projects within the Airframe R and T Project is described in this paper. Glass, David E. and Merski, N. Ronald and Glass, Christopher E. Langley Research Center NASA/TM-2002-211752, NAS 1.15:211752
Download or read book Hypersonic Vehicles written by Giuseppe Pezzella and published by BoD – Books on Demand. This book was released on 2022-05-04 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some sixty years after the experimental flights of the North American X-15 hypersonic rocket-powered aircraft, sustained hypervelocity travel is still the next frontier in high-speed transportation. Today, there is much excitement and interest regarding hypersonic vehicles. In fact, many aerospace agencies, large industries, and several start-ups are involved in design activities and experimental campaigns both in wind tunnels and in-flight with full-scale experimental flying test beds and prototypes to make hypersonic travel almost as easy and convenient as airliner travel. Achieving this goal will radically revolutionize the future of civil transportation. This book contains valuable contributions that focus on various design issues related to hypersonic aircraft.
Download or read book Structures and Materials Technology Issues for Reusable Launch Vehicles written by and published by . This book was released on 1985 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic and Supersonic Flight written by K. N. Volkov and published by Intechopen. This book was released on 2023-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hypersonic flight vehicles have the potential to enable a range of future aviation and space missions. However, the extreme environmental conditions associated with high Mach number flight pose a major challenge for vehicle aerodynamics, materials and structures, and flight control, particularly within the hybrid ramjet/scramjet/rocket propulsion systems. The complexity of hypersonic vehicles requires closer coupling of aerodynamics and design principles with new materials development to achieve expanded levels of performance and structural durability. This book focuses on the fundamental disciplines and practical applications involved in the investigation, description, and analysis of super- and hypersonic aircraft flight including applied aerodynamics, aircraft propulsion, materials, and other topics.
