Download or read book Structure and Dielectric Properties of Pure and Zinc Oxide Doped Barium Titanate written by M. Hasan and published by . This book was released on 2013 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of zinc oxide addition and sintering parameters on the structure and dielectric properties of barium titanate are observed. Different percentage of ZnO ranging from 0.30 to 1 wt. % is doped in barium titanate. Both the doped and undoped samples are sintered at temperatures ranging from 1250°C to 1325°C at different soaking times. The amount of densification of the doped and undoped samples is measured in terms of percentage theoretical density. Grain size and microstructural analysis is performed by a scanning electron microscope (SEM). Lattice parameters and tetragonality of doped and undoped barium titanate are calculated from x-ray diffraction pattern obtained from x-ray diffractometer (XRD) test. Dielectric properties of the samples are measured by an impedance analyzer. It is found that all the doped samples obtain their maximum percentage theoretical density at a lower sintering temperature compared to the undoped sample. SEM study reveals that the doped samples always show smaller grains compared to the undoped sample. Significant grain growth is observed in all of the samples at sintering temperatures above 1300°C. The evidence of surface melting is observed in 1 wt. % ZnO-doped sample soaked at 1325°C for 2 h. The presence of liquid at that sintering condition is explained by the doping mechanism of Zn2+ in BaTiO3. Correlation among the grain size, tetragonality, and dielectric properties of the doped and undoped samples are also discussed.
Download or read book Structure and Dielectric Properties of Barium Titanate and Similar Compounds written by Albert Frederick DEVONSHIRE and published by . This book was released on 1948 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Oxide Additions on the Microstructure and Dielectric Properties of Barium Titanate written by Karl E. Nelson and published by . This book was released on 1957 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modulating the Effect of Yttrium Doping on the Structural and Dielectric Properties of Barium Titanate written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanate Based Ceramic Dielectric Materials written by R. Saravanan and published by Materials Research Forum LLC. This book was released on 2018-02-25 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Barium titanate is one of the most important electronic materials; due to its high permittivity, low dielectric loss and high tunability. The environment friendly material is suitable for microphones and microwave device applications such as tunable capacitors, delay lines, filters, resonators and phase shifters. Doped titanates are extensively used for various electronic devices, such as transducers, piezoelectric actuators, passive memory storage devices, dynamic random access memory (DRAM), multilayer ceramic capacitors (MLCCs), positive temperature coefficient resistors (PTCR), optoelectronic devices and infrared sensors. The book presents research results concerning the electron density distribution in a number of doped barium titanate ceramic materials using experimental X-ray diffraction data, UV-visible spectrophotometry (UV-vis), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The analysis of interatomic bonding and electron density distribution is important for predicting the properties of potentially important materials and has previously been lacking for the materials studied. Barium Titanate, Barium Titanate Doping, Dielectric Ceramics, Permittivity, Tunability, Transducers, Piezoelectric Actuators, Memory Storage Devices, Multilayer Ceramic Capacitors, Optoelectronic Devices, X-Ray Diffraction Data, UV-Visible Spectrophotometry, Energy Dispersive X-Ray Spectroscopy, Interatomic Bonding, Electron Density Distribution, Ceramic Property Predictions.
Download or read book Ferroelectrics Literature Index written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on ferroelectricity and ferroelectric materials started in 1920 with the discovery by Valasek that the variation of spontaneous polarization in Rochelle salt with sign and magnitude of an applied electric field traced a complete and reproducible hysteresis loop. Activity in the field was sporadic until 1935, when Busch and co-workers announced the observation of similar behavior in potassium dihydrogen phosphate and related compounds. Progress thereafter continued at a modest level with the undertaking of some theoretical as well as further experimental studies. In 1944, von Hippel and co-workers discovered ferroelectricity in barium titanate. The technological importance of ceramic barium titanate and other perovskites led to an upsurge of interest, with many new ferroelectrics being identified in the following decade. By 1967, about 2000 papers on various aspects of ferroelectricity had been published. The bulk of this widely dispersed literature was concerned with the experimental measurement of dielectric, crystallographic, thermal, electromechanical, elastic, optical, and magnetic properties. A critical and excellently organized cpmpilation based on these data appeared in 1969 with the publica tion of Landolt-Bornstein, Volume 111/3. This superb tabulation gave instant access to the results in the literature on nearly 450 pure substances and solid solutions of ferroelectric and antiferroelectric materials. Continuing interest in ferroelectrics, spurred by the growing importance of electrooptic crystals, resulted in the publication of almost as many additional papers by the end of 1969 as had been surveyed in Landolt-Bornstein.
Download or read book The Dielectric Constant of Barium Titanate written by I. P. Kozlobaev and published by . This book was released on 1955 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dielectric Properties and Ageing of Acceptor doped Barium Titanate Ceramics written by Mahmud Mansur Ben Omran and published by . This book was released on 1997 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and Characterization of Lanthanum Doped Barium Titanate for High k Dielectric Materials written by Nur Farahin Abdul Hamid and published by . This book was released on 2016 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are three main parts of this research. First, the parent compositions of pure BaTiO3 were studied as a standard sample. The optimum temperatures for synthesis were determined based on pure BaTiO3 sample. Second, the solid solution limit for La-doped BaTiO3 were investigated. For the effect of doping, the analogue’s composition of Ba1-xLaxTiO3 and Ba1-xLaxTi1-x/4O3 are synthesized and studied ; next, the structural properties of lanthanum doped barium titanate was characterized by using X-ray Diffraction (XRD) and Rietveld Refinement analysis. The analysis followed by electrical characterization using impedance spectroscopy.
Download or read book Thermally stimulated Current and Dielectric Properties of Doped and Undoped Barium Titanate written by Wayne Huebner and published by . This book was released on 1987 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ferroelectric Materials and Ferroelectricity written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a joint effort of the Research Materials Information Center (RMIC) of the Solid State Division at Oak Ridge National Laboratory and the Libraries and Information Systems Center at Bell Telephone Laboratories (BTL) Murray Hill, N. J. The Research Materials Information Center has, since 1963, been answering inquiries on the avail ability, preparation, and properties of inorganic solid-state research materials. The preparation of bibliographies has been essential to this function, and the interest in ferroelectrics led to the compila tion of the journal and report literature on that subject. The 1962 book Ferroelectric Crystals, by Jona and Shirane, was taken as a cutoff point, and all papers through mid-1969 received by the Center have been included. The Libraries and Information Systems Center of BTL has, over a period of years, developed a proprie tary package of computer programs called BELDEX, which formats and generates indexes to biblio graphic material. This group therefore undertook to process RMIC's ferroelectric references by BELDEX so that both laboratories could have the benefit of an indexed basic bibliography in this important research area.
Download or read book Bibliography written by Pierre Villars and published by Walter de Gruyter. This book was released on 2012-12-21 with total page 1827 pages. Available in PDF, EPUB and Kindle. Book excerpt: By browsing about 10 000 000 scientific articles of over 200 major journals mainly in a 'cover to cover approach' some 200 000 publications were selected. The extracted data is part of the following fundamental material research fields: crystal structures (S), phase diagrams (also called constitution) (C) and the comprehensive field of intrinsic physical properties (P). This work has been done systematically starting with the literature going back to 1900. The above mentioned research field codes (S, C, P) as well as the chemical systems investigated in each publication were included in the present work. The aim of the Inorganic Substances Bibliography is to provide researchers with a comprehensive compilation of all up to now published scientific publications on inorganic systems in only three handy volumes.
Download or read book Ferroelectricity in Doped Hafnium Oxide written by Uwe Schroeder and published by Woodhead Publishing. This book was released on 2019-03-27 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectricity in Doped Hafnium Oxide: Materials, Properties and Devices covers all aspects relating to the structural and electrical properties of HfO2 and its implementation into semiconductor devices, including a comparison to standard ferroelectric materials. The ferroelectric and field-induced ferroelectric properties of HfO2-based films are considered promising for various applications, including non-volatile memories, negative capacitance field-effect-transistors, energy storage, harvesting, and solid-state cooling. Fundamentals of ferroelectric and piezoelectric properties, HfO2 processes, and the impact of dopants on ferroelectric properties are also extensively discussed in the book, along with phase transition, switching kinetics, epitaxial growth, thickness scaling, and more. Additional chapters consider the modeling of ferroelectric phase transformation, structural characterization, and the differences and similarities between HFO2 and standard ferroelectric materials. Finally, HfO2 based devices are summarized. - Explores all aspects of the structural and electrical properties of HfO2, including processes, modelling and implementation into semiconductor devices - Considers potential applications including FeCaps, FeFETs, NCFETs, FTJs and more - Provides comparison of an emerging ferroelectric material to conventional ferroelectric materials with insights to the problems of downscaling that conventional ferroelectrics face
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Download or read book Polymer Nanocomposites written by Xingyi Huang and published by Springer. This book was released on 2016-05-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental principles and recent progress in the field of electrical and thermal properties of polymer nanocomposites. The physical and chemical natures determining the electrical and thermal properties of polymer nanocomposites are discussed in detail. The authors describe the range of traditional and emerging polymer nanocomposites from nanoparticle and polymer composites to novel nanostructure based polymer nanocomposites. They include novel properties and potential applications, such as high-k, low-k, high thermal conductivity, antistatic, high voltage insulation, electric stress control, and thermal energy conversion among others.
Download or read book Ferroelectric Materials for Energy Applications written by Haitao Huang and published by John Wiley & Sons. This book was released on 2019-01-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive overview of the emerging applications of ferroelectric materials in energy harvesting and storage Conventional ferroelectric materials are normally used in sensors and actuators, memory devices, and field effect transistors, etc. Recent progress in this area showed that ferroelectric materials can harvest energy from multiple sources including mechanical energy, thermal fluctuations, and light. This book gives a complete summary of the novel energy-related applications of ferroelectric materials?and reviews both the recent advances as well as the future perspectives in this field. Beginning with the fundamentals of ferroelectric materials, Ferroelectric Materials for Energy Applications offers in-depth chapter coverage of: piezoelectric energy generation; ferroelectric photovoltaics; organic-inorganic hybrid perovskites for solar energy conversion; ferroelectric ceramics and thin films in electric energy storage; ferroelectric polymer composites in electric energy storage; pyroelectric energy harvesting; ferroelectrics in electrocaloric cooling; ferroelectric in photocatalysis; and first-principles calculations on ferroelectrics for energy applications. -Covers a highly application-oriented subject with great potential for energy conversion and storage applications. -Focused toward a large, interdisciplinary group consisting of material scientists, solid state physicists, engineering scientists, and industrial researchers -Edited by the "father of integrated ferroelectrics" Ferroelectric Materials for Energy Applications is an excellent book for researchers working on ferroelectric materials and energy materials, as well as engineers looking to broaden their view of the field.
