Download or read book Dynamic Stability of Suddenly Loaded Structures written by George J. Simitses and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic instability or dynamic buckling as applied to structures is a term that has been used to describe many classes of problems and many physical phenomena. It is not surprising, then, that the term finds several uses and interpretations among structural mechanicians. Problems of parametric resonance, follower-force, whirling of rotating shafts, fluid-solid interaction, general response of structures to dynamic loads, and several others are all classified under dynamic instability. Many analytical and experimental studies of such problems can be found in several books as either specialized topics or the main theme. Two such classes, parametric resonance and stability of nonconservative systems under static loads (follower-force problems), form the main theme of two books by V. V. Bolotin, which have been translated from Russian. Moreover, treatment of aero elastic instabilities can be found in several textbooks. Finally, analytical and experimental studies of structural elements and systems subjected to intense loads (of very short duration) are the focus of the recent monograph by Lindberg and Florence. The first chapter attempts to classify the various "dynamic instability" phenomena by taking into consideration the nature of the cause, the character of the response, and the history of the problem. Moreover, the various concepts and methodologies as developed and used by the various investigators for estimating critical conditions for suddenly loaded elastic systems are fully described. Chapter 2 demonstrates the concepts and criteria for dynamic stability through simple mechanical models with one and two degrees of freedom.

Download or read book Fundamentals of Structural Stability written by George Simitses and published by Butterworth-Heinemann. This book was released on 2006-01-03 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanable introduction to the theory of structural stability, useful for a wide variety of engineering disciplines, including mechanical, civil and aerospace.

Download or read book Nonlinear Analysis of Thin Walled Structures written by James F. Doyle and published by Springer Science & Business Media. This book was released on 2001-05-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering, an engineering discipline born of the needs of the Industrial Revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face the profound issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a new series, featuring graduate texts and research monographs, intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that will cover a broad range of concentrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of consulting editors, each an expert in one of the areas of concentration. The names of the consult ing editors are listed on page vi. The areas of concentration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. We are pleased to present Nonlinear Analysis of Thin-Walled Structures by James F. Doyle. Austin, Texas Frederick F. Ling Preface This book is concerned with the challenging subject of the nonlinear static, dynamic, and stability analyses of thin-walled structures. It carries on from where Static and Dynamic Analysis of Structures, published by Kluwer 1991, left off; that book concentrated on frames and linear analysis, while the present book is focused on plated structures, nonlinear analysis, and a greater emphasis on stability analysis.

Download or read book Modern Trends in Structural and Solid Mechanics 2 written by Noel Challamel and published by John Wiley & Sons. This book was released on 2021-06-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprised of three separate volumes presents the recent developments and research discoveries in structural and solid mechanics; it is dedicated to Professor Isaac Elishakoff. This second volume is devoted to the vibrations of solid and structural members. Modern Trends in Structural and Solid Mechanics 2 has broad scope, covering topics such as: exact and approximate vibration solutions of rods, beams, membranes, plates and three-dimensional elasticity problems, Bolotins dynamic edge effect, the principles of plate theories in dynamics, nano- and microbeams, nonlinear dynamics of shear extensible beams, the vibration and aeroelastic stability behavior of cellular beams, the dynamic response of elastoplastic softening oscillators, the complex dynamics of hysteretic oscillators, bridging waves, and the three-dimensional propagation of waves. This book is intended for graduate students and researchers in the field of theoretical and applied mechanics.

Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.

Download or read book Nonlinear Dynamics of Structures Systems and Devices written by Walter Lacarbonara and published by Springer Nature. This book was released on 2020-01-29 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first of three volumes from the inaugural NODYCON, held at the University of Rome, in February of 2019, presents papers devoted to Nonlinear Dynamics of Structures, Systems and Devices. The collection features both well-established streams of research as well as novel areas and emerging fields of investigation. Topics in Volume I include multi-scale dynamics: coexistence of multiple time/space scales, large system dynamics; dynamics of structures/industrial machines/equipment/facilities (e.g., cable transportation systems, suspension bridges, cranes, vehicles); nonlinear interactions: parametric vibrations with single/multi-frequency excitations, multiple external and autoparametric resonances in multi-dof systems; nonlinear system identification: parametric/nonparametric identification, data-driven identification; experimental dynamics: benchmark experiments, experimental methods, instrumentation techniques, measurements in harsh environments, experimental validation of nonlinear models; wave propagation, solitons, kinks, breathers; solution methods for pdes: Lie groups, Hirota’s method, perturbation methods, etc; nonlinear waves in media (granular materials, porous materials, materials with memory); composite structures: multi-layer, functionally graded, thermal loading; fluid/structure interaction; nonsmooth and retarded dynamics: systems with impacts, free play, stick-slip, friction hysteresis; nonlinear systems with time and/or space delays; stability of delay differential equations, differential-algebraic equations; space/time reduced-order modeling: enhanced discretization methods, center manifold reduction, nonlinear normal modes, normal forms; fractional-order systems; computational techniques: efficient algorithms, use of symbolic manipulators, integration of symbolic manipulation and numerical methods, use of parallel processors; and multibody dynamics: rigid and flexible multibody system dynamics, impact and contact mechanics, tire modeling, railroad vehicle dynamics, computational multibody dynamics.

Download or read book Uncertainty Modeling in Finite Element Fatigue and Stability of Systems written by Achintya Haldar and published by World Scientific. This book was released on 1997 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The functionality of modern structural, mechanical and electrical or electronic systems depends on their ability to perform under uncertain conditions. Consideration of uncertainties and their effect on system behavior is an essential and integral part of defining systems. In eleven chapters, leading experts present an overview of the current state of uncertainty modeling, analysis and design of large systems in four major areas: finite and boundary element methods (common structural analysis techniques), fatigue, stability analysis, and fault-tolerant systems. The content of this book is unique; it describes exciting research developments and challenges in emerging areas, and provide a sophisticated toolbox for tackling uncertainty modeling in real systems.

Download or read book Stability Analysis and Design of Structures written by M.L. Gambhir and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced and graduate-level text and self-tutorial teaches readers to understand and to apply analytical design principles across the breadth of the engineering sciences. Emphasizing fundamentals, the book addresses the stability of key engineering elements such as rigid-body assemblage, beam-column, beam, rigid frame, thin plate, arch, ring, and shell. Each chapter contains numerous worked-out problems that clarify practical application and aid comprehension of the basics of stability theory, plus end-of-chapter review exercises. Others key features are the citing and comparison of different national building standards, use of non-dimensional parameters, and many tables with much practical data and simplified formula, that enable readers to use them in the design of structural components. First six chapters most suitable for undergraduate-level study and remaining chapters for graduate-level courses.

Download or read book Stability of Structures written by Chai H Yoo and published by Elsevier. This book was released on 2011-05-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current trend of building more streamlined structures has made stability analysis a subject of extreme importance. It is mostly a safety issue because Stability loss could result in an unimaginable catastrophe. Written by two authors with a combined 80 years of professional and academic experience, the objective of Stability of Structures: Principles and Applications is to provide engineers and architects with a firm grasp of the fundamentals and principles that are essential to performing effective stability analysts. Concise and readable, this guide presents stability analysis within the context of elementary nonlinear flexural analysis, providing a strong foundation for incorporating theory into everyday practice. The first chapter introduces the buckling of columns. It begins with the linear elastic theory and proceeds to include the effects of large deformations and inelastic behavior. In Chapter 2 various approximate methods are illustrated along with the fundamentals of energy methods. The chapter concludes by introducing several special topics, some advanced, that are useful in understanding the physical resistance mechanisms and consistent and rigorous mathematical analysis. Chapters 3 and 4 cover buckling of beam-columns. Chapter 5 presents torsion in structures in some detail, which is one of the least well understood subjects in the entire spectrum of structural mechanics. Strictly speaking, torsion itself does not belong to a topic in structural stability, but needs to be covered to some extent for a better understanding of buckling accompanied with torsional behavior. Chapters 6 and 7 consider stability of framed structures in conjunction with torsional behavior of structures. Chapters 8 to 10 consider buckling of plate elements, cylindrical shells, and general shells. Although the book is primarily devoted to analysis, rudimentary design aspects are discussed. - Balanced presentation for both theory and practice - Well-blended contents covering elementary to advanced topics - Detailed presentation of the development

Download or read book Nonlinear Dynamics of Structures written by Sergio Oller and published by Springer. This book was released on 2014-09-04 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book lays the foundation of knowledge that will allow a better understanding of nonlinear phenomena that occur in structural dynamics. This work is intended for graduate engineering students who want to expand their knowledge on the dynamic behavior of structures, specifically in the nonlinear field, by presenting the basis of dynamic balance in non‐linear behavior structures due to the material and kinematics mechanical effects. Particularly, this publication shows the solution of the equation of dynamic equilibrium for structure with nonlinear time‐independent materials (plasticity, damage and frequencies evolution), as well as those time dependent non‐linear behavior materials (viscoelasticity and viscoplasticity). The convergence conditions for the non‐linear dynamic structure solution are studied and the theoretical concepts and its programming algorithms are presented.

Download or read book Stochastic Dynamics of Structures written by Jie Li and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Stochastic Dynamics of Structures, Li and Chen present a unified view of the theory and techniques for stochastic dynamics analysis, prediction of reliability, and system control of structures within the innovative theoretical framework of physical stochastic systems. The authors outline the fundamental concepts of random variables, stochastic process and random field, and orthogonal expansion of random functions. Readers will gain insight into core concepts such as stochastic process models for typical dynamic excitations of structures, stochastic finite element, and random vibration analysis. Li and Chen also cover advanced topics, including the theory of and elaborate numerical methods for probability density evolution analysis of stochastic dynamical systems, reliability-based design, and performance control of structures. Stochastic Dynamics of Structures presents techniques for researchers and graduate students in a wide variety of engineering fields: civil engineering, mechanical engineering, aerospace and aeronautics, marine and offshore engineering, ship engineering, and applied mechanics. Practicing engineers will benefit from the concise review of random vibration theory and the new methods introduced in the later chapters. "The book is a valuable contribution to the continuing development of the field of stochastic structural dynamics, including the recent discoveries and developments by the authors of the probability density evolution method (PDEM) and its applications to the assessment of the dynamic reliability and control of complex structures through the equivalent extreme-value distribution." —A. H-S. Ang, NAE, Hon. Mem. ASCE, Research Professor, University of California, Irvine, USA "The authors have made a concerted effort to present a responsible and even holistic account of modern stochastic dynamics. Beyond the traditional concepts, they also discuss theoretical tools of recent currency such as the Karhunen-Loeve expansion, evolutionary power spectra, etc. The theoretical developments are properly supplemented by examples from earthquake, wind, and ocean engineering. The book is integrated by also comprising several useful appendices, and an exhaustive list of references; it will be an indispensable tool for students, researchers, and practitioners endeavoring in its thematic field." —Pol Spanos, NAE, Ryon Chair in Engineering, Rice University, Houston, USA

Download or read book Structural Stability And Morphogenesis written by Rene Thom and published by CRC Press. This book was released on 2018-03-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2018. Routledge is an imprint of Taylor & Francis, an Informa company.

Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by John Wiley & Sons. This book was released on 2017-07-14 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classic power system dynamics text now with phasor measurement and simulation toolbox This new edition addresses the needs of dynamic modeling and simulation relevant to power system planning, design, and operation, including a systematic derivation of synchronous machine dynamic models together with speed and voltage control subsystems. Reduced-order modeling based on integral manifolds is used as a firm basis for understanding the derivations and limitations of lower-order dynamic models. Following these developments, multi-machine model interconnected through the transmission network is formulated and simulated using numerical simulation methods. Energy function methods are discussed for direct evaluation of stability. Small-signal analysis is used for determining the electromechanical modes and mode-shapes, and for power system stabilizer design. Time-synchronized high-sampling-rate phasor measurement units (PMUs) to monitor power system disturbances have been implemented throughout North America and many other countries. In this second edition, new chapters on synchrophasor measurement and using the Power System Toolbox for dynamic simulation have been added. These new materials will reinforce power system dynamic aspects treated more analytically in the earlier chapters. Key features: Systematic derivation of synchronous machine dynamic models and simplification. Energy function methods with an emphasis on the potential energy boundary surface and the controlling unstable equilibrium point approaches. Phasor computation and synchrophasor data applications. Book companion website for instructors featuring solutions and PowerPoint files. Website for students featuring MATLABTM files. Power System Dynamics and Stability, 2nd Edition, with Synchrophasor Measurement and Power System Toolbox combines theoretical as well as practical information for use as a text for formal instruction or for reference by working engineers.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Structural Dynamics written by Bruce K. Donaldson and published by Cambridge University Press. This book was released on 2006-10-23 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook, first published in 2006, provides the student of aerospace, civil and mechanical engineering with all the fundamentals of linear structural dynamics analysis. It is designed for an advanced undergraduate or first-year graduate course. This textbook is a departure from the usual presentation in two important respects. First, descriptions of system dynamics are based on the simpler to use Lagrange equations. Second, no organizational distinctions are made between multi-degree of freedom systems and single-degree of freedom systems. The textbook is organized on the basis of first writing structural equation systems of motion, and then solving those equations mostly by means of a modal transformation. The text contains more material than is commonly taught in one semester so advanced topics are designated by an asterisk. The final two chapters can also be deferred for later studies. The text contains numerous examples and end-of-chapter exercises.

Download or read book Dynamic Stability of Structures written by George Herrmann and published by Elsevier. This book was released on 2014-06-28 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Stability of Structures covers the proceedings of an International Conference on Dynamic Stability of Structures, held in Northwestern University, Evanston, Illinois on October 18-20, 1965, jointly sponsored by the Air Force of Scientific Research and Northwestern University. The conference aims to delineate the various categories of dynamic stability phenomena. This book is organized into six sections encompassing 20 chapters that tackle general topics such as mathematical methods of analysis, physical phenomena, design applications in engineering, and reports of field research. The first two sections deal with the fundamentals, principles, and concept of dynamic stability, as well as an introduction to the use of computing machines as an aid in studying the motions of complicated dynamical systems. The succeeding two sections highlight the statistical aspects in the structural stability theory and certain problems of structural dynamic. These sections also look into the dynamic buckling of elastic structures and the buckling of long slender ships due to wave-induced whipping. The last two sections explore the stability and vibration problems of mechanical systems under harmonic excitation and the dynamic buckling under step loading. These sections also include discussions on the nonlinear dynamic response of shell-type structures and of a column under random loading, as well as Italian research in the field. Structural and mechanical engineers will find this book invaluable.

Download or read book Uncertainty Modeling in Vibration Control and Fuzzy Analysis of Structural Systems written by Bilal M. Ayyub and published by World Scientific. This book was released on 1997 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the current state of uncertainty modeling in vibration, control, and fuzzy analysis of structural and mechanical systems. It is a coherent compendium written by leading experts and offers the reader a sampling of exciting research areas in several fast-growing branches in this field. Uncertainty modeling and analysis are becoming an integral part of system definition and modeling in many fields. The book consists of ten chapters that report the work of researchers, scientists and engineers on theoretical developments and diversified applications in engineering systems. They deal with modeling for vibration, control, and fuzzy analysis of structural and mechanical systems under uncertain conditions. The book designed for readers who are familiar with the fundamentals and wish to study a particular topic or use the book as an authoritative reference. It gives readers a sophisticated toolbox for tackling modeling problems in mechanical and structural systems in real-world situations. The book is part of a series on Stability, Vibration and Control of Structures, and provides vital information in these areas.