Download or read book Fundamentals of Structural Stability written by George Simitses and published by Butterworth-Heinemann. This book was released on 2006-01-03 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanable introduction to the theory of structural stability, useful for a wide variety of engineering disciplines, including mechanical, civil and aerospace.
Download or read book Structural Stability of Steel written by Theodore V. Galambos and published by John Wiley & Sons. This book was released on 2008-04-18 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical guide to structural stability theory for the design of safe steel structures Not only does this book provide readers with a solid foundation in structural stability theory, it also offers them a practical, working knowledge of how this theory translates into design specifications for safe steel structures. Structural Stability of Steel features detailed discussions of the elastic and inelastic stability of steel columns, beams, beam-columns, and frames alongside numerous worked examples. For each type of structural member or system, the authors set forth recommended design rules with clear explanations of how they were derived. Following an introduction to the principles of stability theory, the book covers: * Stability of axially loaded planar elastic systems * Tangent-modulus, reduced-modulus, and maximum strength theories * Elastic and inelastic stability limits of planar beam-columns * Elastic and inelastic instability of planar frames * Out-of-plane, lateral-torsional buckling of beams, columns, and beam-columns The final two chapters focus on the application of stability theory to the practical design of steel structures, with special emphasis on examples based on the 2005 Specification for Structural Steel Buildings of the American Institute of Steel Construction. Problem sets at the end of each chapter enable readers to put their newfound knowledge into practice by solving actual instability problems. With its clear logical progression from theory to design implementation, this book is an ideal textbook for upper-level undergraduates and graduate students in structural engineering. Practicing engineers should also turn to this book for expert assistance in investigating and solving a myriad of stability problems.
Download or read book Principles of Structural Stability written by H. Ziegler and published by Birkhäuser. This book was released on 2013-11-21 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: FirstEdition DUE TO THE necessity to save weight and materialin the design ofmodern structures and machines, stability problems have become increasingly im portant. The classicalengineering approach to this type of problem has been characterized by the tacit assumption that structures are nongyroscopic conservative systems, that is, bythegeneraladoptionofthemethodsdeveloped for this particular case. During the last decades numerous stability problems of a more complicated nature have become important, and it has therefore become necessary to correlate the various types of problems with the ap proaches to be used in their solution. The principal object ofthis little bookisthis correlation between the systems to be investigated and the methods to be used for this purpose, In other words, our main concern is the choice of a correct approach. It is evident that this idea renders it necessary to distinguish between the various types of problems or systems. At the same time the similarities and the connections between apparently quite different problems will become obvious, and it will be evident that there islittle differencebetween, say, the buckling of a column, thecritical speed of a turbine shaft, and the stability of an airplane, a control mechanism, or an electric circuit.
Download or read book Structural Stability And Morphogenesis written by Rene Thom and published by CRC Press. This book was released on 2018-03-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2018. Routledge is an imprint of Taylor & Francis, an Informa company.
Download or read book Principles of Structural Stability Theory written by Alexander Chajes and published by Prentice Hall. This book was released on 1974 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Stability Theory and Practice written by Sukhvarsh Jerath and published by John Wiley & Sons. This book was released on 2020-12-08 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the theory of structural stability and its applications in crucial areas in engineering Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shells combines necessary information on structural stability into a single, comprehensive resource suitable for practicing engineers and students alike. Written in both US and SI units, this invaluable guide is perfect for readers within and outside of the US. Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shell offers: Detailed and patiently developed mathematical derivations and thorough explanations Energy methods that are incorporated throughout the chapters Connections between theory, design specifications and solutions The latest codes and standards from the American Institute of Steel Construction (AISC), Canadian Standards Association (CSA), Australian Standards (SAA), Structural Stability Research Council (SSRC), and Eurocode 3 Solved and unsolved practice-oriented problems in every chapter, with a solutions manual for unsolved problems included for instructors Ideal for practicing professionals in civil, mechanical, and aerospace engineering, as well as upper-level undergraduates and graduate students in structural engineering courses, Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shell provides readers with detailed mathematical derivations along with thorough explanations and practical examples.
Download or read book Stability Theory and Its Applications to Structural Mechanics written by Clive L. Dym and published by Courier Dover Publications. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integration of modern work in structural stability theory, this volume focuses on the Koiter postbuckling analyses, with mathematical notions of stability of motion. In relation to discrete and continuous systems, it bases the minimum energy principles for static stability upon the dynamic concepts of stability of motion. It further develops the asymptotic buckling and postbuckling analyses from potential energy considerations, with applications to columns, plates, and arches.
Download or read book Geometrical Methods in the Theory of Ordinary Differential Equations written by V.I. Arnold and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book, geometrical methods in the theory of ordinary differential equations have become very popular and some progress has been made partly with the help of computers. Much of this progress is represented in this revised, expanded edition, including such topics as the Feigenbaum universality of period doubling, the Zoladec solution, the Iljashenko proof, the Ecalle and Voronin theory, the Varchenko and Hovanski theorems, and the Neistadt theory. In the selection of material for this book, the author explains basic ideas and methods applicable to the study of differential equations. Special efforts were made to keep the basic ideas free from excessive technicalities. Thus the most fundamental questions are considered in great detail, while of the more special and difficult parts of the theory have the character of a survey. Consequently, the reader needs only a general mathematical knowledge to easily follow this text. It is directed to mathematicians, as well as all users of the theory of differential equations.
Download or read book Fundamentals of Structural Mechanics Dynamics and Stability written by A.I. Rusakov and published by CRC Press. This book was released on 2020-12-15 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the material from general theory and fundamentals through to practical applications. Explains the finite element method for elastic bodies, trusses, frames, non-linear behavior of materials, and more. Includes numerous practical worked examples and case studies throughout each chapter.
Download or read book Structural Stability written by Wai-Kai Chen and published by Prentice Hall. This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Stability: Theory and Implementation is a practical work that provides engineers and students in structural engineering or structured mechanics with the background needed to make the transition from fundamental theory to practical design rules and computer implementation. Beginning with the basic principles of structural stability and basic governing equations, Structural Stability is a concise and comprehensive introduction that applies the principles and theory of structural stability (which are the basis for structural steel design) to the solution of practical building frame design problems. Special features include: modern theories of structural stability of members and frames, and a discussion of how these theories may be utilized to provide design rules and calculation techniques for design important governing equations and the classical solutions used in design processes examples of analytical and numerical methods selected as the most useful and practically applicable methods available detailed information on the stability design rules of the 1986 AISC/LRFD Specifications for the design, fabrication, and erection of structural steel for buildings dual units (SI and English) with most of the material presented in a non-dimensional format fully worked examples, end-of-chapter problems, answers to selected problems, and clear illustrations and tables Am outstandingly practical resource, Structural Stability offers the reader an understanding of the fundamental principles and theory of structural stability not only in an idealized, perfectly elastic system, but also in an inelastic, imperfect system representative of the actual structural systems encountered in engineering practice.
Download or read book Optimal Structural Design under Stability Constraints written by Antoni Gajewski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first optimal design problem for an elastic column subject to buckling was formulated by Lagrange over 200 years ago. However, rapid development of structural optimization under stability constraints occurred only in the last twenty years. In numerous optimal structural design problems the stability phenomenon becomes one of the most important factors, particularly for slender and thin-walled elements of aerospace structures, ships, precision machines, tall buildings etc. In engineering practice stability constraints appear more often than it might be expected; even when designing a simple beam of constant width and variable depth, the width - if regarded as a design variable - is finally determined by a stability constraint (lateral stability). Mathematically, optimal structural design under stability constraints usually leads to optimization with respect to eigenvalues, but some cases fall even beyond this type of problems. A total of over 70 books has been devoted to structural optimization as yet, but none of them has treated stability constraints in a sufficiently broad and comprehensive manner. The purpose of the present book is to fill this gap. The contents include a discussion of the basic structural stability and structural optimization problems and the pertinent solution methods, followed by a systematic review of solutions obtained for columns, arches, bar systems, plates, shells and thin-walled bars. A unified approach based on Pontryagin's maximum principle is employed inasmuch as possible, at least to problems of columns, arches and plates. Parametric optimization is discussed as well.
Download or read book Lectures On Dynamical Systems Structural Stability And Their Applications written by Kotik K Lee and published by World Scientific. This book was released on 1992-05-14 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The communication of knowledge on nonlinear dynamical systems, between the mathematicians working on the analytic approach and the scientists working mostly on the applications and numerical simulations has been less than ideal. This volume hopes to bridge the gap between books written on the subject by mathematicians and those written by scientists. The second objective of this volume is to draw attention to the need for cross-fertilization of knowledge between the physical and biological scientists. The third aim is to provide the reader with a personal guide on the study of global nonlinear dynamical systems.
Download or read book Interatomic Potential and Structural Stability written by Kiyoyuki Terakura and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural stability is of fundamental importance in materials science. Up-to-date information on the theoretical aspects of phase stability of materials is contained in this volume. Most of the first-principles calculations are based on the local-density approximation (LDA). In contrast, this volume contains very recent results of "going beyond LDA", such as the density gradient expansion and the quantum Monte-Carlomethod. Following the recently introduced theoretical methods for the calculation of interatomic potentials, forces acting on atoms and total energies such as the Car-Parrinello, the effective-medium and the bond-ordermethod, attempts have been made to develop even more sophisticated methods such as the order-N method in electronic-structure calculations. The present status of these methods and their application to real systems are described. In addition, in order to study the phase stability atfinite temperatures, the microscopic calculations have to be combined with statistical treatment of the systems to describe, e.g. order-disorder transitions on the Si(001) surface or alloy phase diagrams. This book contains examples for this type of calculations.
Download or read book Proceedings of the Second International Conference on Structural Stability and Dynamics written by G. R. Liu and published by World Scientific. This book was released on 2003 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICSSD 2002 is the second in the series of International Conferences on Structural Stability and Dynamics, which provides a forum for the exchange of ideas and experiences in structural stability and dynamics among academics, engineers, scientists and applied mathematicians. Held in the modern and vibrant city of Singapore, ICSSD 2002 provides a peep at the areas which experts on structural stability and dynamics will be occupied with in the near future. From the technical sessions, it is evident that well-known structural stability and dynamic theories and the computational tools have evolved to an even more advanced stage. Many delegates from diverse lands have contributed to the ICSSD 2002 proceedings, along with the participation of colleagues from the First Asian Workshop on Meshfree Methods and the International Workshop on Recent Advances in Experiments and Computations on Modeling of Heterogeneous Systems. Forming a valuable source for future reference, the proceedings contain 153 papers ? including 3 keynote papers and 23 invited papers ? contributed by authors from all over the world who are working in advanced multi-disciplinary areas of research in engineering. All these papers are peer-reviewed, with excellent quality, and cover the topics of structural stability, structural dynamics, computational methods, wave propagation, nonlinear analysis, failure analysis, inverse problems, non-destructive evaluation, smart materials and structures, vibration control and seismic responses.The major features of the book are summarized as follows: a total of 153 papers are included with many of them presenting fresh ideas and new areas of research; all papers have been peer-reviewed and are grouped into sections for easy reference; wide coverage of research areas is provided and yet there is good linkage with the central topic of structural stability and dynamics; the methods discussed include those that are theoretical, analytical, computational, artificial, evolutional and experimental; the applications range from civil to mechanical to geo-mechanical engineering, and even to bioengineering.
Download or read book Structural Stability in Engineering Practice written by Lajos Kollar and published by CRC Press. This book was released on 2003-09-01 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Stability in Engineering Practice elucidates the various problems associated with attaining stability, and provides the results for practical use by the design engineer. By presenting a simple and visual description of the physical phenomena, the authors show how to determine the critical loads of various structures, such as frames, arches, building structures, trusses and sandwiches. Special emphasis is given to the post-critical behaviour - essential for assessing the safety of structures - and furthermore to the summation theories that make the solution of complicated stability problems relatively simple.
Download or read book The Structural Stability of Welds in Columbium Alloys written by General Electric Company and published by . This book was released on 1964 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Stability And Dynamics Volume 1 With Cd rom Proceedings Of The Second International Conference written by Chien Ming Wang and published by World Scientific. This book was released on 2002-12-05 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICSSD 2002 is the second in the series of International Conferences on Structural Stability and Dynamics, which provides a forum for the exchange of ideas and experiences in structural stability and dynamics among academics, engineers, scientists and applied mathematicians. Held in the modern and vibrant city of Singapore, ICSSD 2002 provides a peep at the areas which experts on structural stability and dynamics will be occupied with in the near future. From the technical sessions, it is evident that well-known structural stability and dynamic theories and the computational tools have evolved to an even more advanced stage. Many delegates from diverse lands have contributed to the ICSSD 2002 proceedings, along with the participation of colleagues from the First Asian Workshop on Meshfree Methods and the International Workshop on Recent Advances in Experiments and Computations on Modeling of Heterogeneous Systems. Forming a valuable source for future reference, the proceedings contain 153 papers — including 3 keynote papers and 23 invited papers — contributed by authors from all over the world who are working in advanced multi-disciplinary areas of research in engineering. All these papers are peer-reviewed, with excellent quality, and cover the topics of structural stability, structural dynamics, computational methods, wave propagation, nonlinear analysis, failure analysis, inverse problems, non-destructive evaluation, smart materials and structures, vibration control and seismic responses.The major features of the book are summarized as follows: a total of 153 papers are included with many of them presenting fresh ideas and new areas of research; all papers have been peer-reviewed and are grouped into sections for easy reference; wide coverage of research areas is provided and yet there is good linkage with the central topic of structural stability and dynamics; the methods discussed include those that are theoretical, analytical, computational, artificial, evolutional and experimental; the applications range from civil to mechanical to geo-mechanical engineering, and even to bioengineering.
